• 전기전자학회논문지
• /
• 제24권1호
• /
• pp.178-185
• /
• 2020

본 논문에서는 미래 LAN 기반 디지털 변전소 보호를 위하여 정밀 시각동기 기반 동기 샘플링 구조를 적용한 계통 구성 IED(Intelligent Electronic Device)의 HW/SW 플랫폼을 제안하였다. 제안한 플랫폼은 전력계통 자동화를 위한 표준인 IEC 61850 프로토콜 및 IED 간 정밀 시각동기를 위한 IEEE 1588 Precision time protocol 통합 소프트웨어가 적용되었으며, Synchronized reference signal을 이용한 IED 간 동기 샘플링 구조를 적용하였다. 이는 미래 IEC 61850 기반 디지털 변전소에 적용될 네트워크 기반 데이터 송수신 환경에서 IED 간 동기 측정된 계전 데이터를 제공하게 함으로써, 네트워크 기반 분산 측정 데이터를 이용한 새로운 보호 및 제어방식을 적용할 수 있는 토대를 제공할 것으로 기대된다. 제시한 플랫폼 기술의 타당성 및 성능을 측정하기 위하여 TMDXIDK572 멀티코어/멀티프로세서 EVM(Evaluation Module)을 기반으로 구현하였으며, 성능 시험 환경을 구성하여 제시한 플랫폼의 시각동기 성능 및 동기 샘플링 기능의 동작을 확인하였다.

• Ocean and Polar Research
• /
• 제22권2호
• /
• pp.57-67
• /
• 2000

Time-selective self-triggering water sampler, AUTTLE developed by Jin et al. (1999) has been improved in order to prevent pre-deposition of suspended sediments (SS) before sampling. By using two solenoids, the improved sampler is able to be moored or deployed with inclination. Its position is changed to horizontal position by activating the first solenoid, and then the endcaps of the sampling bottle are closed by the second solenoid that is driven three times to minimize possible failure of sampling. An external control unit for setting sampling time has been also constructed. Additionally, the electric circuit housing of the sampler has been modified to be detached from the sampling bottle when operating manually. Its performance has been confirmed through flume tests and a field experiment. It will serve as a valuable tool in the various fields of oceanography and environmental engineering, especially where seawater sampling synchronized at several sites and/or the information in storm period is important.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.33.3-33
• /
• 2002

Pseudolite (PL) is a kind of signal generator, which transmits GPS-like signal at the ground. However our own made PL is different from a GPS satellite in clock accuracy. GPS satellites are synchronized by use of high precision atomic clocks. But because our PLs use low cost temperature controlled oscillators (TCXO), so it is very difficult to synchronize them. Hence, we should install reference station and use Differential GPS (DGPS) algorithm to calculate user position. By use of this method, we already developed indoor navigation system a few years ago. We named it as 'Asynchronous Pseudolite Indoor Navigation System'. However, this system requires that sampling times of all the receivers...

• 소음진동
• /
• 제2권2호
• /
• pp.117-123
• /
• 1992

In the study, the design method of reconstruction filter is studied for synchronized sampling which is necessary for order tracking in rotating machinery. The original data sampled at constant intervals, using fixed anti- aliasing filters, is reconstructed by digital reconstruction filter and is resampled at new sampling times calculated by a suitable shaft angle encoder pulse arrival times in order to synchronize with shaft velocity. In addition to eliminating the tracking synthesizer and filters, this new method has no phase noise due to phase-locked loops.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2017년도 추계학술대회
• /
• pp.522-523
• /
• 2017

전류컨베이어 회로와 시간-디지털 변화기를 이용하여 아날로그-디지털 변환기를 설계하였다. 전류컨베이어 회로를 이용하여 아날로그 전압의 크기를 샘플링한 다음, 전류원을 이용하여 샘플링 전압을 방전하면서 아날로그 전압을 시간정보로 변환하였다. 시간정보는 카운터 타입의 시간-디지털 변환기를 이용하여 디지털 값으로 변환되는데 이때 변환 에러를 감소시키기 위해 시간정보 펄스와 동기화된 클록을 생성하여 사용하였다.

• Journal of the korean society of oceanography
• /
• 제34권4호
• /
• pp.200-206
• /
• 1999

Seawater sampling is the primary task for the study of the marine environmental parameters that require shipboard or laboratory experiments for their analyses, and is also required for the calibration of some instruments for in situ measurement. A new automatic bottle (AUTTLE) is developed for seawater sampling at any desired time and water depth by self-triggering. Both any type of single or assembled mooring for 15 days and manual actuation by using a remote messenger as existing instantaneous single point water samplers are possible. Its sampling capacity and the resolution of time setting are 2 liters and 1 second, respectively. The result of a field experiment with an optical backscattering sensor (OBS) and a total of 14 AUTTLES for the in situ calibration of the OBS shows that the AUTTLE must improve our understanding on the behavior of the sand/mud mixtures in the environments with high waves and strong tides. The AUTTLE will serve as a valuable instrument in the various fields of oceanography, especially where synchronized seawater sampling at several sites is required and/or the information in storm period is important.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 1990년도 추계학술발표회논문집
• /
• pp.35-40
• /
• 1990

Temperature distribution of high pressure mercury lamp has been mesured as a function of time using spectroscopic method. Sampling signal which is synchronized by lamp voltage was used to mesure temporal line intensity at each radius. To obtain radial temprature distribution, the mesured intensity was transformed into radial line intensity by Abel's formula. Absolute temperature profile was calculater from relative intensities of spectral lines as a function of line and tube radius. The temperature profile is very similar to the electrical tube current profile.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.684_685
• /
• 2009

A digital sampling algorithm that uses a two high resolution integrating Voltmeters which are synchronized by Phase Lock Loop (PLL) time clock for accurately measuring the parameters, active and reactive power, for sinusoidal power measurements is presented. The PLL technique provides high precision measurements, root mean square (rms), phase and complex voltage ratio, of the AC signal. The system has been designed to be used at the Korean Research Institute of Standards and Science (KRISS) as a reference power standard for electrical power calibrations. The test results have shown that the accuracy of the measurements is better than $10 {\mu}W/VA$ and the level of uncertainty is valid for the power factor range zero to 1 for both lead and lag conditions. The system is fully automated and allows power measurements and calibration of high precision wattmeters and power calibrators at the main power frequencies 50 and 60 Hz.

• IEIE Transactions on Smart Processing and Computing
• /
• 제4권6호
• /
• pp.391-402
• /
• 2015

In this paper, we present implementation of backward movement control of truck-trailer vehicles using a fuzzy mode-based control scheme considering practical constraints and computational overhead. We propose a fuzzy feedback controller where output is predicted with the delay of a unit sampling period. Analysis and design of the proposed controller is very easy, because it is synchronized with sampling time. Stability analysis is also possible when quantization exists in the implementation of fuzzy control architectures, and we show that if the trivial solution of the fuzzy control system without quantization is asymptotically stable, then the solutions of the fuzzy control system with quantization are uniformly ultimately bounded. Experimental results using a toy truck show that the proposed control system outperforms a conventional system.

• Journal of Electrical Engineering and Technology
• /
• 제11권6호
• /
• pp.1527-1534
• /
• 2016

Online voltage stability monitoring using real-time measurements is one of the most important tasks in a smart grid system to maintain the grid stability. Loading margin is a good indicator for assessing the voltage stability level. This paper presents an Extreme Learning Machine (ELM) approach for estimation of voltage stability level under credible contingencies using real-time measurements from Phasor Measurement Units (PMUs). PMUs enable a much higher data sampling rate and provide synchronized measurements of real-time phasors of voltages and currents. Depth First (DF) algorithm is used for optimally placing the PMUs. To make the ELM approach applicable for a large scale power system problem, Mutual information (MI)-based feature selection is proposed to achieve the dimensionality reduction. MI-based feature selection reduces the number of network input features which reduces the network training time and improves the generalization capability. Voltage magnitudes and phase angles received from PMUs are fed as inputs to the ELM model. IEEE 30-bus test system is considered for demonstrating the effectiveness of the proposed methodology for estimating the voltage stability level under various loading conditions considering single line contingencies. Simulation results validate the suitability of the technique for fast and accurate online voltage stability assessment using PMU data.