• 대한전기학회논문지:전력기술부문A
• /
• 제49권1호
• /
• pp.26-30
• /
• 2000

Switching of the transmission lines(T/L) is one of the methods for wuppressing the short circuit capacity. This paper presents the T/L switching operation by using the Hopfield neural network(HNN). The switching of T/L can make the line powers and the bus voltages deteriorated, as well as the fault current decreased. Such an insecure state should be avoided when the T/L is operated to be open. In this studies, the inequality constraints are formulated into the objective function to be incorporated with the HNN. Test results show that the convergence characteristics of HNN lead to the adequate solution of T/L switching.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 합동 추계학술대회 논문집 정보 및 제어부문
• /
• pp.15-17
• /
• 2001

This paper deals with a design problem of a switching-type fuzzy-model-based controller for a nonlinear system. Takagi-Sugeno(TS) fuzzy model and duffing forced-oscillation system are employed in designing the switching-type fuzzy controller. Finally, we analyze the stability of the global system controlled by the proposed controller.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.152.1-152
• /
• 2001

This paper presents a high performance and cost effective way by using an FPGA circuit to implement torque controller so that the SRM can operate at high speed. In order to increase the operating speed, we need to implement both the torque and the current controllers by using an FPGA. However, it is difficult to implement all of the torque controller in the FPGA. Moreover, implementation of a time critical part is sufficient for improving the performance. One of the time critical part is the switching angle control. In this study, torque controller which calculate the switching on and commutation angles is implemented in PC because these angle are a function of rotor velocity which is varied slowly, and switching angle controller ...

• 대한전자공학회논문지
• /
• 제17권6호
• /
• pp.86-92
• /
• 1980

다단스위칭 회로를 구성하고 있는 트랜지스터의 스위칭 동작을 베이스전압과 단위 스텝 응답함수의 특성을 고려하여 해석 하였으며 트랜지스터의 축적시간을 고려하면 트랜지스터를 시간지연소자로 간주할 수 있다고 보고 이를 이용하여 IC화 할 수 있는 시간지연 회로 및 발진회로를 제시하였다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.498-501
• /
• 2009

Electrophoretic displays (EPDs) are attracting considerable attentions as a paper-like display. Especially, Electrophoretic cell consists of micron-sized, charged particles dispersed in a viscous fluid. When an external electric field is applied, the charged particles move with a speed proportional to the particle mobility and the local field strength. In electrophoretic displays fast switching times are required, so knowing the particle mobility is very important. In this paper, we study a novel simulation for calculating the particle motions submerged in a viscous fluid for horizontal switching electrophoretic cell.

• 제어로봇시스템학회논문지
• /
• 제3권6호
• /
• pp.576-581
• /
• 1997

DC-DC converter with chopper is seen to have problems, such as, loop instability and degradation of transient response, due to the interaction between input filter and switching regulator. In this paper, the switching regulator consisting of input filter and double chopper is analyzed, and the state space model at continuous current mode and the transfer function between duty ratio of switching pulse and output voltage are derived. The controller in this paper is designed as feedforward(P) and feedback(PI) control scheme to minimize the variation of output voltage, and computer simulation results are presented to show the performance of the proposed controller.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2014년도 전력전자학술대회 논문집
• /
• pp.301-302
• /
• 2014

This paper describes four switch three-phase Z-source rectifier with improved switching characteristics. This configuration has some advantages switching loss and optimal drive circuit. The rectifier has buck-boost function by shoot-through state. Also, the rectifier has the advantage of decreasing inrush current in start-up and transient states. In order to reduce harmonics PWM modulation technique with a variable index has been suggested. Four switch three-phase Z-source rectifier with improved switching characteristics can output stable DC voltage at the same time decreasing the system's harmonic current. And also the paper presents an application of DCC method in Z-source rectifier. Principles and dynamics of the system are discussed in detail. After having viewed the results we can confirm that the proposed method is eligible and efficient.

• 대한수학회지
• /
• 제56권4호
• /
• pp.947-984
• /
• 2019

We provide two shifted analogues of the tableau switching process due to Benkart, Sottile, and Stroomer; the shifted tableau switching process and the modified shifted tableau switching process. They are performed by applying a sequence of elementary transformations called switches and shares many nice properties with the tableau switching process. For instance, the maps induced from these algorithms are involutive and behave very nicely with respect to the lattice property. We also introduce shifted generalized evacuation which exactly agrees with the shifted J-operation due to Worley when applied to shifted Young tableaux of normal shape. Finally, as an application, we give combinatorial interpretations of Schur P- and Schur Q-function related identities.

• 한국통신학회:학술대회논문집
• /
• 한국통신학회 1986년도 춘계학술발표회 논문집
• /
• pp.169-176
• /
• 1986

The function of administration and maintenance on the TDX-1 digital switching system, which have been developed in ETRI(Electrotechnology and Telecommunications Research Institute), are reported. In administration, the functions of charging, statistics, data handling, man-mechine communication and I/0 device control are described. In maintenance, the function of fault detection and processing, status handling and alarm described.

• 한국정보통신학회논문지
• /
• 제13권5호
• /
• pp.922-930
• /
• 2009

유도 전동기를 전압 제어하기 위한 최적 PWM 스위칭 방법을 제시하려한다. 전압 인버터의 공간 벡터 변조 방식은 DC-버스 이용을 향상시키고 정류 손실을 감소시키기 때문에 디지털 구현의 경우 특히 선호하는 PWM 방법이다. 유도 전동기 전압 제어를 위한 최적 PWM 스위칭 방법은 제시한 최적 PWM 알고리즘을 사용하여 두 개의 활성 전압 벡터(active voltage vector)와 하나의 영 전압 벡터(zero voltage vector)로 구성하였다. 선택된 스위칭 순차 열은 변조 지수(modulation index)와 운송파(carrier wave) 주기의 함수로 정의 된다. 순차 열은 인버터 스위칭 손실과 전류 리플 값을 기준으로 사용하여 선택된다. 실험 결과 중 저 전력용으로 사용할 경우 스위칭 주파수를 증가시킴에 따라 고조파 왜곡이 감소하고 동특성이 좋아짐을 확인할 수 있었다.