• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(2)
• /
• pp.141-144
• /
• 2002

Several charge Injection compensation circuits, such as, the dummy transistor circuit, the switched OP-amp circuit, the switched capacitor circuit, were fabricated and the test results were compared. The differences between SPICE simulation results and measurements were within around 10%.

• Journal of Information Display
• /
• 제9권2호
• /
• pp.9-13
• /
• 2008

A novel push-pull voltage converter structure, using a switched capacitor type voltage doubler, is proposed. The circuit is constructed with a two-stage push-pull voltage doubler that has a stable operation with small output ripple. The two-stage voltage doubler creates the output voltage 4Vdd. The high clock signal is cross-coupled to the input of the second stage with the opposite phase to reduce two switching transistors and capacitors. Simulation results verify that even with a reduced number of transistor and capacitor, there is no circuit performance loss. Adding one capacitor and two switching transistors the circuit can be changed to eight times of Vdd maker.

• 대한전자공학회논문지
• /
• 제26권11호
• /
• pp.1666-1671
• /
• 1989

A novel switched-capacitor circuit for interfacing capacitive microtransducers with a digital system is developed based on the dual-slope integration. It consists of a differential integrator and a comparator. Driven by the teo phase clock, the circuit first senses the capacitance difference between the transducer and the reference capacitor in the form of charge, and accumulates it into the feedback capabitor of the integrator for a fixed period of time. The resulant accumulated charge is next extracted by the known reference charge until the integrator output voltage refurns to zero. The length of time required for the integrator output to return to zero, as measured by the number of clock cycle gated into a counter is proportional to the capacitance difference, averaged over the integration period. The whole operation is insensitive to the reference voltage and the capacitor values involved in the circuit, Thus the proposed circuit permits an accurate differental capacitance measurement. An error analysis has showh that the resolution as high as 8 bits can be expected by realizing the circuit in a monolithic MOS IC form. Besides the accuracy, it features the small device count integrable onto a small chip area. The circuit is thus particularly suitadble for the on-chip interface.

• Journal of Power Electronics
• /
• 제19권1호
• /
• pp.1-10
• /
• 2019

Current imbalance is the main factor affecting the lifespan of light-emitting diode (LED) lighting systems and is generally solved by active or passive approaches. Given many new lighting applications, independent control is particularly important in achieving different levels of luminance. Existing passive and active approaches have their own limitations in current sharing and independent control, which bring new challenges to the design of LED drivers. In this work, a multichannel resonant converter based on switched-capacitor control (SCC) is proposed for solving this challenge. In the resonant network of the upper and lower half-bridges, SCC is used instead of fixed capacitance. Then, the individual current of the LED array is obtained through regulation of the effective capacitance of the SCC under a fixed switching frequency. In this manner, the complexity of the control unit of the circuit and the precision of the multichannel outputs are further improved. Finally, the superior performance of the proposed LED driver is verified by simulations and a 4-channel experimental prototype with a rated output power of 20 W.

• Journal of Power Electronics
• /
• 제11권1호
• /
• pp.1-9
• /
• 2011

This paper describes a two quadrant bidirectional soft switching converter for ultra capacitor interface circuits. The total efficiency of the energy storage system in terms of size and cost can be increased by a combination of batteries and ultra capacitors. The required system energy is provided by a battery, while an ultra capacitor is used at high load power pulses. The ultra capacitor voltage changes during charge and discharge modes, therefore an interface circuit is required between the ultra capacitor and the battery. This interface circuit must have good efficiency while providing bidirectional power conversion to capture energy from regenerative braking, downhill driving and the protecting ultra capacitor from immediate discharge. In this paper a fully soft switched two quadrant bidirectional soft switching converter for ultra capacitor interface circuits is introduced and the elements of the converter are reduced considerably. In this paper, zero voltage transient (ZVT) and zero current transient (ZCT) techniques are applied to increase efficiency. The proposed converter acts as a ZCT Buck to charge the ultra capacitor. On the other hand, it acts as a ZVT Boost to discharge the ultra capacitor. A laboratory prototype converter is designed and realized for hybrid vehicle applications. The experimental results presented confirm the theoretical and simulation results.

• 센서학회지
• /
• 제25권5호
• /
• pp.326-332
• /
• 2016

A novel CMOS temperature sensor with binary output is implemented by using fully differential switched-capacitor circuits for resistorless implementation of the temperature sensor core. Temperature sensing is based on the temperature characteristics of the pn diodes implemented by substrate pnp transistors fabricated using standard CMOS processes. The binary outputs are generated by using the charge-balance principle that eliminates the division operation of the PTAT voltage by the bandgap reference voltage. The chip was designed in a MagnaChip $0.35-{\mu}m$ CMOS process, and the designed circuit was verified using Spectre circuit simulations. The verified circuit was laid out in an area of $950{\mu}m{\times}557 {\mu}m$ and is currently under fabrication.

• Journal of Power Electronics
• /
• 제16권6호
• /
• pp.2057-2066
• /
• 2016

An extension of the one-cycle control (OCC) method for switched-capacitor (SC) converters is proposed in this paper, featuring a fast dynamic response, wide line and load operation ranges, and simplicity in implementation. To illustrate the operation principle of this nonlinear control method and to demonstrate its simplicity in design, a dual-phase unity gain SC converter is examined. A new control loop based on the charge balance in a flying capacitor is formulated for the OCC technique and implemented with a 15W dual-phase unity gain SC converter on a circuit board for control verification. The obtained experimental results show that external disturbances can be rejected in one switching cycle by the OCC controlled SC converter with good line and load regulations. When compared to other control methods, the proposed nonlinear control loop exhibits superior dynamic performance in suppressing input and load disturbances.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2014년도 추계학술대회
• /
• pp.569-572
• /
• 2014

본 논문에서는 MEMS 용량형 센서를 위한 CMOS 스위치드-커패시터 인터페이스 회로를 설계하였다. 설계된 회로는 커패시턴스-전압 변환기(CVC), 2차 스위치드 커패시터 ${\Sigma}{\Delta}$ 변조기 및 비교기로 구성되어있다. 또한 일정한 바이어스를 공급해주는 바이어스 회로를 추가하였다. 전체적인 회로의 저주파 잡음과 오프셋을 감소시키기 위하여 Correlated-Double-Sampling(CDS) 기법과 Chopper-Stabilization(CHS) 기법을 적용하였다. 설계 결과 CVC는 20.53mV/fF의 민감도와 0.036%의 비선형성특성을 보였으며, ${\Sigma}{\Delta}$ 변조기는 입력전압 진폭이 100mV가 증가할 때, 출력의 듀티 싸이클은 약 5%씩 증가하였다. 전체회로의 선형성 에러는 0.23% 이하이며, 전류소모는 0.73mA이다. 제안된 회로는 0.35um CMOS 공정을 이용하여 설계되었으며, 입력전압은 3.3V이다. 설계된 칩의 크기는 패드를 포함하여 $1117um{\times}983um$ 이다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -2
• /
• pp.739-742
• /
• 2002

This article proposes a Four-Quadrant Analog Multiplier (4-QAM) applying switched-capacitor and pulse-width amplitude modulation (PWAM) principles. The features of the presented circuit are that it can function as analog multiplier with a wide dynamic range of input signal and no disturbing from deviation of carrier frequency of PWM signal. In addition, the circuit detail is simpler than that of the previously proposed circuits. It is then easy and applicable for employing it into Integrated Circuit (IC) realization to especially operate in low-frequency and low-power applications. The experimental results granted are in correspondence to the theoretical analysis.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2013년도 추계학술대회 논문집
• /
• pp.105-106
• /
• 2013

This paper proposes a new topology with active switched-capacitor and switched-inductor impedance network, which can obtain a high boost factor with small shoot-through time. The proposed topology uses an active switched capacitor and switched-inductor impedance network in order to couple the main circuit and input dc source for boosting the output voltage. The proposed topology contains all advantages of the classical Z-source inverter. Comparing with other topologies, the proposed topology uses lesser component and the voltage boost inversion ability significantly increases. The theoretical analysis, pulse width modulation control strategies, and a comparison with classical ZSI have been given in this paper. Both simulation and experimental results will be presented to verify the advantages of the proposed topology.