• 전력전자학회논문지
• /
• 제10권6호
• /
• pp.569-577
• /
• 2005

본 논문에서는 일반적으로 교류 전동기 구동을 위해 널리 사용되고 있는 6-switch IGBT module을 3상 SRM에 적용한 새로운 구동 방법을 제안한다 비대칭 브리지 컨버터의 경우 사용되는 소자수가 많고 복잡한 제어 및 구동회로를 요구하며 이로 인하여 전체적인 시스템 가격은 상승하게 된다. SRM구동을 위한 비대칭 브리지 컨버터의 구동 방법과 비교하여 본 논문에서 제안한 구동방법은 전체적인 시스템의 크기와 파격을 줄일 수 있다. 따라서 유도기, BLDC 모터, 그 외의 모터등과 비교할 수 있는 SRM 구동을 위한 새로운 토폴로지가 될 수 있다. 제안된 회로의 타당성을 검증하기 위해 비대칭 브리지 컨버터를 적응한 시스템과의 비교 실험을 진행하였다.

• 한국통신학회:학술대회논문집
• /
• 한국통신학회 1991년도 추계종합학술발표회논문집
• /
• pp.141-144
• /
• 1991

In this paper, we analyze the performance of ATM switch with output buffer which has a space priority control mechanism. As we assumed that the input traffic consists of loss tolerable voice and loss sensitive data, we modeled it with MMPP(Markov Modulated Poisson Process). We confirmed that the loss probability of loss sensitive traffic decreases when we use the space priority control mechanism.

• 전력전자학회논문지
• /
• 제19권2호
• /
• pp.133-138
• /
• 2014

This paper proposes a low power-loss averaging current mode control using a resistor and bypass switch. Generally, current sensing method using a resistor has a disadvantage of power loss which degrades the efficiency of the entire systems. On the other hand, proposed measurement technique operating with bypass-switch connected in parallel with sensing resistor can reduce power loss significantly the current sensor. An analog-circuited bypass driver is implemented and used along with an average-circuit mode controller. The bypass switch bypasses the sensing current with a small amount of power loss. In this paper, a 50[W] prototype average current mode boost converter has been implemented for the experimental verification.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 Proceedings ICPE 01 2001 International Conference on Power Electronics
• /
• pp.309-313
• /
• 2001

A single-phase bi-directional inverter with a diode bridge-type resonant circuit to implement ZVT(Zero Voltage Transition) switching is proposed. It is shown that the polarized ramptime current control algorithm, a method that belongs to the family of ZACE(Zero Average Current Error) methods, is a suitable technique to integrate with a typical single-phase ZVT inverter. The proposed current control algorithm is analyzed to design the circuit with auxiliary switch which can operate with ZVT for the main power switch. The simulation results would be shown to verify the proposed current algorithm to turn the main power switch on with ZVT and to operate the inverter bi-directionally

• 한국통신학회논문지
• /
• 제21권11호
• /
• pp.2850-2861
• /
• 1996

This paper describes the design of AATM switch LIS of shared buffer type with linked-list architecture to control memory access. The proposed switch LSI consists of the buffer memory, controller and FIFO memory blocks and two special circuits to avoid the cell blocking. One of the special circuit is a new address control scheme with linked-list architecture which maintains the address of buffer memory serially ordered from write address to read address. All of the address is linked as chain is operated like a FIFO. The other is slip-flag register it will be hold the address chain when readaddress missed the reading of data. The circuits control the buffer memory efficiently and reduce the cell loss rate. As a result the designed chip operates at 33ns and occupied on 2.7*2.8mm$^{2}$ using 0.8.mu.m CMOS technology.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 2009년도 IWAIT
• /
• pp.441-445
• /
• 2009

We have developed a real-time software tool to extract a speech feature vector whose time sequences consist of three groups of vector components; the phonetic/acoustic features such as formant frequencies, the phonemic features as outputs on neural networks, and some distances of Japanese phonemes. In those features, since the phoneme distances for Japanese five vowels are applicable to express vowel articulation, we have designed a switch, a volume control and a color representation which are operated by pronouncing vowel sounds. As examples of those vowel interface, we have developed some speech training tools to display a image character or a rolling color ball and to control a cursor's movement for aurally- or vocally-handicapped children. In this paper, we introduce the functions and the principle of those systems.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.258-261
• /
• 2001

High Power factor Active Filter converter is used for Inverter Air conditioner power supply to meet IEC standard. In the active filter topology for power factor, extra switch just control the input current indirectly to meet the IEC standard for reducing the cost and size. In this paper, low cost converter was suggested by simulation using extra switch which auxiliary pulse is inserted and quasi resonant soft switching topology control is adapted for panel's inverter air conditioner converter Inserting auxiliary Pulse method to the extra switch has the benefit of reducing THD by low cost input control circuit. And also quasi resonant soft switching topology can reduce switching loss. So both technical is suitable for Panel's Air conditioner.

• Journal of Power Electronics
• /
• 제10권6호
• /
• pp.702-708
• /
• 2010

In this paper, a fault diagnosis algorithm for brushless DC (BLDC) motor drives is proposed to maintain control performance under switch open-damage. The proposed fault diagnosis algorithm consists of a simple algorithm using measured phase current information and it detects open-circuit faults based on the operating characteristic of BLDC motors. The proposed algorithm quickly recovers control performance due to its short detection time and its reconfiguration of the system topology. It can be embedded into existing BLDC drive software as a subroutine without additional sensors. The feasibility of the proposed fault diagnosis algorithm is proven by simulation and experimental results.

• 전기학회논문지P
• /
• 제58권4호
• /
• pp.391-396
• /
• 2009

In this paper, a control algorithm for DC-Link voltage unbalancing compensation of a four-switch inverter for a three-phase BLDC motor drive is proposed. Compared with a conventional six-switch inverter, the split source of the four-switch inverter can be obtained by splitting DC-link capacitor into two capacitors to drive the three phase BLDC motor. The voltages across each of two capacitors are not always equal in steady state because of the unbalance in the impedance of the DC-link capacitors $C_1$ and $C_2$ or the variable current flowed into the capacitor's neutral point in motor control. Despite the unbalance, if the BLDC motor may be run for a long time the voltage across one of the capacitors is more increased. So the unbalance in the capacitors voltages will be accelerated. As a result, The current ripple and torque ripple is increased due to the fluctuation of input current which flows into 3-phase BLDC motor. According to that, the vibration of motor will be increased and the whole system will be instable. This paper presents a control algorithm for DC-Link voltage unbalancing compensation. The sampling from the voltages across each of two capacitors is used to perform the voltage control of DC-Link by using the feedforward controller.

• 사물인터넷융복합논문지
• /
• 제6권1호
• /
• pp.97-102
• /
• 2020

사물인터넷 환경에서 다중 객체의 스위치 제어는 고전압을 구동하기 위해 레벨 시프터가 있는 여러 솔리드 스테이트 구조로써 낮은 ON 저항과 양방향 릴레이 MOS 스위치를 통합했으며 외부 직렬 논리 제어에 의해 독립적으로 제어되어야 한다. 이 장치는 의료용 초음파 이미지 시스템, 잉크젯 프린터 제어 등의 IoT 기기뿐만 아니라, 켈빈 4 단자 측정을 사용한 PCB 개방 / 단락 및 누출 테스트 시스템과 같은 저전압 제어 신호에 의한 고전압 스위칭 제어가 필요한 응용 제품에 사용하도록 설계되었다. 이 논문에서는 FPGA (Field Programmable Gate Array) 테스트 패턴 생성을 사용한 아날로그 스위치 제어 블록의 구현 및 검증에 대하여 고찰하였다. 각 블록은 Verilog 하드웨어 설명 언어를 사용하여 구현된 후 Modelsim에 의해 시뮬레이션 되고 FPGA 보드에서 프로토타입화 되어 적용되었다. 제안된 아키텍처는 IoT 환경에서 여러개의 개체들을 동시에 제어하여야 하는 분야에 적용할 수 있으며 유사 형태의 IC를 테스트하기 위해 제안된 패턴 생성 방법을 적용할 수 있다.