• 한국정보전자통신기술학회논문지
• /
• 제11권6호
• /
• pp.732-741
• /
• 2018

여러 배터리 셀을 직렬로 연결해서 사용하는 BMS에서 사용 가능 용량을 최대화시키기 위하여 각 셀의 전압을 같도록 맞춰주는 셀 밸런싱 기술이 필요하다. 다중 권선 변압기를 사용하는 능동 셀 밸런싱 회로에서 셀 간 직접적 (direct cell-to-cell)으로 에너지를 전달하는 밸런싱 회로는 PMOS 스위치와 NMOS 스위치를 구동하기 위한 게이트 구동 칩은 PMOS 스위치와 NMOS 스위치 개수 만큼 TLP2748 포토커플러(photocoupler)와 TLP2745 포토커플러가 필요하므로 원가가 증가하고 집적도가 떨어진다. 그래서 본 논문에서는 포토커플러를 사용하여 PMOS와 NMOS 스위칭소자를 구동하는 대신 70V BCD 공정기반의 PMOS 게이트 구동회로와 NMOS 게이트 구동회로, 스위칭 시간이 개선된 PMOS 게이트 구동회로와 NMOS 게이트 구동회로를 제안하였다. 스위칭 시간이 개선된 PMOS 게이트 구동 스위치의 ${\Delta}t$는 8.9ns이고, NMOS 게이트 구동 스위치의 ${\Delta}t$는 9.9ns로 양호한 결과를 얻었다.

• 한국산업정보학회논문지
• /
• 제18권5호
• /
• pp.81-92
• /
• 2013

인공위성은 태양전지판 전개, 통신 안테나 전개, 관측 장비에 대한 오염방지 덮개, 추진계의 파이로테크닉 밸브 및 리튬-이온 셀 모듈 바이패스 장치 등 다수의 분리장치들을 포함하고 있다. 파이로테크닉 회로로 동작되는 분리장치의 기폭제들은 단발성으로 동작되기 때문에 기폭제 구동은 성공적 임무 수행을 위해 필수 요소이다. 파이로테크닉 회로는 안전을 위한 스위칭 네트워크를 포함해야 한다. 일반적인 스위칭 네트워크는 기폭제 점화 동안 스위칭 과도상태 전류를 취급하기 위해 높은 정격 전류 용량의 점화 스위치로 구성되는 단점이 존재한다. 파이로테크닉 회로는 기폭제가 메인버스에서 점화되면 버스에서 요구되는 첨두 전력을 감소시킬 수 있는 전력 조절 기능을 필요로 한다. 본 논문은 기폭제 점화 동안 스위칭 과도상태 전류를 취급하기 위해 높은 정격 전류 용량의 점화 스위치로 구성되는 단점을 극복하기 위해 점화 스위치를 작동시키기 위한 점화 명령에 동조된 파이로테크닉 회로를 설계한다. 파이로테크닉 회로는 점화스위치들이 점화 전류를 전달만 하고 스위칭을 하지 않는 것을 보증하기 위해 점화 명령에 동조되어 전류 제한된 윈도우 펄스 점화 전류를 제공한다. 전류 제한된 윈도우 펄스 점화 전류는 스위칭 네트워크에서 낮은 정격 전류 용량과 가벼운 무게의 스위치 사용을 가능하게 한다. 파이로테크닉 회로의 전류 제한 기능은 기폭제에 공급하는 전압을 감소시키고 첨두 버스 전력을 감소시키는 전력 조절 효과를 제공한다. 정지궤도위성 개발에 적용하기 위해 파이로테크닉 회로는 개발 모델에서 시험하여 기능을 검증하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2016년도 전력전자학술대회 논문집
• /
• pp.361-362
• /
• 2016

Presented in this paper is the design of a high voltage switch module made up of MOSFETs, pulse transformers and their gate driver circuits compactly fitted onto a single PCB module. The ease by which the switch modules can be configured (series stacking and/or parallel stacking) to meet future load variations allows for flexible operation of this design. In addition, the detailed implementation of the gate driver circuit for reliable and easier switch synchronization is also described in this paper. The stored energy in the capacitor bank of a 15kV, 4.5kJ/s peak power capacitor charger was discharged using the developed high voltage switch, and by experimental results, the operation of the proposed circuit was verified to be effectively used as a switch for pulse discharging.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.212-214
• /
• 2005

The charge-pump circuit which is used to generate higher voltage than the available supply voltage has wide applications such as the flash memory of EEPROM Because the demand for high voltage comes from physical mechanism such as the oxide tunneling, the required pumped voltage cannot be scaled as the power supply voltage is scaled. Therefore, an efficient charge-pump circuit that can achieve high voltage from the available low supply voltage is essential. A new Analog Switch p-well CMOS charge pump circuit without the MOS device body effect is processed. By improve the structure of the circuit's transistors to reduce the threshold voltage shift of the devices, the threshold voltage of the device is kept constant. So, the circuit electrical characteristics are higher output voltage within a shorter time than the conventional charge pump. The propose analog switch CMOS charge pump shows compatible performance of the ideal diode or Dickson charge pump.

• Journal of Power Electronics
• /
• 제18권3호
• /
• pp.681-693
• /
• 2018

This paper proposes a soft-switching bidirectional dc-dc converter (BDC) with an auxiliary circuit. The proposed BDC can achieve the zero-voltage switching (ZVS) using an auxiliary circuit in the buck and boost operations. The auxiliary circuit supplies optimal energy for the ZVS operation of the main switches. The auxiliary circuit consists of a resonant inductor, a back-to-back switch and two capacitors. A small-sized resonant inductor and an auxiliary switch with a low-rated voltage can be used in the auxiliary circuit. Zero-current switching (ZCS) turn-on and turn-off of the auxiliary switches are possible. The proposed soft-switching scheme has a look-up table for optimal switching of the auxiliary switches. The proposed strategy properly adjusts the turn-on time of the auxiliary switch according to the load current. The proposed BDC is verified by the results of PSIM simulations and experiments on a 3-kW ZVS BDC system.

• Journal of Power Electronics
• /
• 제15권1호
• /
• pp.31-38
• /
• 2015

In this paper, a buck-boost type battery charger is developed for charging battery set with a lower voltage. This battery charger is configured by a rectifier circuit, an integrated boost/buck power converter and a switched capacitors circuit. A boost power converter and a buck power converter sharing a common power electronic switch are integrated to form the integrated boost/buck power converter. By controlling the common power electronic switch, the battery charger performs a hybrid constant-current/constant-voltage charging method and gets a high input power factor. Accordingly, both the power circuit and the control circuit of the developed battery charger are simplified. The switched capacitors circuit is applied to be the output of the boost converter and the input of the buck converter. The switched capacitors circuit can change its voltage according to the utility voltage so as to reduce the step-up voltage gain of the boost converter when the utility voltage is small. Hence, the power efficiency of a buck-boost type battery charger can be improved. Moreover, the step-down voltage gain of the buck power converter is reduced to increase the controllable range of the duty ratio for the common power electronic switch. A prototype is developed and tested to verify the performance of the proposed battery charger.

• 전력전자학회논문지
• /
• 제18권4호
• /
• pp.359-366
• /
• 2013

This paper proposes a zero-current-transition(ZCT) synchronous buck converter using auxiliary circuit with soft-switching for light weight and high efficiency. In this scheme, an auxiliary circuit is added to the conventional synchronous rectifier buck converter and used to achieve soft-switching condition for both the main switch and synchronous switch. In addition, the switch in the auxiliary circuit operates under soft-switching conditions. Thus, the proposed converter provides a higher efficiency. The basic operations, in this paper, are discussed and design guidelines are presented. The usefulness of the proposed converter is verified on a 200KHz, 20 W prototype converter.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.804-807
• /
• 2005

In this paper, a double scotch yoke mechanism for moving simultaneously the fixed contact and moving contact of a gas circuit brake, is proposed and designed to improve the breaking characteristics of the circuit breaker. Firstly, the design parameters of the scotch yoke are kinematically determined from the desired design condition of the circuit breaker. Next, the stroke curve of the moving contact is designed by considering the design parameter and the specified opening characteristics of electric contacts. Based on the scotch yoke and stroke curve, the dynamics of the electric contacts is analyzed using ADAMS model of switch mechanism.

• Journal of Power Electronics
• /
• 제9권5호
• /
• pp.772-780
• /
• 2009

A novel soft-switching two-switch flyback converter is proposed in this paper. This converter is composed of two active power switches, a flyback transformer, a blocking diode, and two passive regenerative clamping circuits. The proposed converter has the advantages of a low cost circuit configuration, a simple control scheme, a high efficiency, and a wide operating range. The circuit topology, analysis, design considerations, and experimental results of the new flyback converter are presented.

• ETRI Journal
• /
• 제31권3호
• /
• pp.298-303
• /
• 2009

A single-switch parallel resonant converter for induction heating is implemented. The circuit consists of an input LC-filter, a bridge rectifier, and a controlled power switch. The switch operates in soft commutation mode and serves as a high frequency generator. The output power is controlled via the switching frequency. A steady state analysis of the converter operation is presented. A closed-loop circuit model is also presented, and the experimental results are compared with the simulation results.