• 대한전기학회논문지:전력기술부문A
• /
• 제48권8호
• /
• pp.1037-1045
• /
• 1999

We propose two new classes of robust blind equalization algorithms against abrupt changes of channel conditions, which we call a triple-mode algorithm(TMA) and an automatic switch-over algorithm(ASA). The conventional DMGSA exhibits slow convergence rates due to the incorrect equalizer tap-updating process under the severe channel conditions. In order to speed up the convergence process, the TMA operates in triple-mode that is based on the dual-mode of the DMGSA incorporated with the tap-updating control modes of the SGA as well as the MSGA. Without resorting to the decision region for selecting the operation mode in the TMA, the ASA automatically switches the blind mode to the smoother conventional decision-directed mode. The ASA uses the error functional that is the weighted sum of the Generalized Sato error and the decision-directed error, where the weights correspond to the channel conditions. Test results on 16-QAM and 8-VSB datas confirm that the TMA and the ASA perform well under the sudden changes of channel conditions.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.200-203
• /
• 2002

This paper presents Continuous-current mode of $S^4$-PFC(Single-Stage Single-switch Power Factor Correction) converter. Proposed converter operates in the continueous current mode(CCM) at full load and discontinuous current mode(DCM) at light load. So, characteristic of proposed converter is no bus voltage stress and Zero Voltage Switching(ZVS) using resonant auxiliary circuit. And. This paper presents characteristic of $S^4$-PFC converter and effect of circuit parameter of proposed converter through the input inductor, PFC capacitor's variation. All of these theory and characteristic verified through the experiment with a 72W(12V, 6A), $90^{kHz}$ prototype converter.

• 전력전자학회논문지
• /
• 제10권2호
• /
• pp.169-176
• /
• 2005

본 논문에서는 능동 클램프 풀브릿지 Boost 컨버터에 관한 DC 모델링과 AC 모델링 과정에 대하여 기술한다. 동작 원리로부터 이 컨버터의 교류 부분을 등가의 직류 부분으로 바꾸고 반도체 스위치를 재배치하여 개념적인 등가 회로가 유도된다. 유도된 등가회로는 CCM(Continuous conduction mode) Boost 컨버터와 DCM(Discontinuous conduction mode) Buck 컨버터로 표현된다. 유도된 등가회로의 각 스위치 부분을 PWM 스위치 모델로 대체하여 DC 모델 및 AC 모델이 완성된다. 이론적인 DC 및 AC 모델링 결과는 실험이나 SIMPLIS 시뮬레이션을 통해 검증된다.

• Journal of Power Electronics
• /
• 제10권6호
• /
• pp.784-791
• /
• 2010

In this paper, a resonant pulse power converter (RPPC) is proposed. The proposed RPPC transfers the pulse-shape power from a DC source to a load periodically. The RPPC consists of a resonant circuit and a resonant pulse converter driven by a self-switching circuit. Depending on the magnitude difference between the input and output voltages, the operations of the RPPC are divided into 4 modes; boost mode, hybrid mode, direct mode and cut-off mode, respectively. The main switch of the RPPC turns on in the ZCS condition and off in the ZVS condition spontaneously. The operational principles of a RPPC using the self-switching technique are analyzed and verified in experiments. An example of a RPPC application is demonstrated in the area of thermoelectric energy harvesting.

• 전력전자학회논문지
• /
• 제24권3호
• /
• pp.207-214
• /
• 2019

In this study, discrete-time domain analysis is proposed to investigate the input current of a buck AC/DC light-emitting diode (LED) driver. The buck power factor correction converter can operate in both discontinuous conduction mode (DCM) and continuous conduction mode (CCM). Two discontinuous and two continuous conduction operating modes are possible depending on which event terminates the conduction of the main switch in a switching cycle. All four operating modes are considered in the discrete-time domain analysis. The peak current-mode control with slope compensation is used to design a low-cost AC/DC LED driver. A slope compensation design of the buck AC/DC LED driver is described on the basis of a discrete-time domain analysis. Experimental results are presented to confirm the usefulness of the proposed analysis.

• 전력전자학회논문지
• /
• 제20권1호
• /
• pp.65-71
• /
• 2015

This paper presents the efficiency analysis of a critical current mode interleaved PFC rectifier, in which each of three different semiconductor switches is employed as the active switch. The Si FET, SiC FET, and GaN FET are consecutively used with the prototype PFC rectifier, and the efficiency of the PFC rectifier with each different semiconductor switch is analyzed. An equivalent circuit model of the PFC rectifier, which incorporates all the internal losses of the PFC rectifier, is developed. The rms values of the current waveforms main circuit components are calculated. By adapting the rms current waveforms to the equivalent model, all the losses are broken down and individually analyzed to assess the conduction loss, switching loss, and magnetic loss in the PFC rectifier. This study revealed that the GaN FET offers the highest overall efficiency with the least loss among the three switching devices. The GaN FET yields 96% efficiency at 90 V input and 97.6% efficiency at 240 V, under full load condition. This paper also confirmed that the efficiency of the three switching devices largely depends on the turn-on resistance and parasitic capacitance of the respective switching devices.

• 항공우주기술
• /
• 제2권1호
• /
• pp.108-116
• /
• 2003

본 연구는 통신위성 전력제어장치(Power control&Distribution Unit)의 설계 및 해석에 관한 내용을 기술한다. 위성체 전력제어장치는 임무기간동안 각 서브시스템과 탑재체에 충분한 전력을 공급하여야 하며, 또한 우주환경 하에서 높은 신뢰성 및 성능이 요구된다. 전력제어 및 분배장치의 제어회로를 위해 버스전압검출 및 필터회로, 오차신호 증폭회로 그리고 SAS 및 BPC 오차신호 회로가 포함되었다. 설계된 제어보상회로에 대한 주파수 응답특성분석을 통해 각 회로의 위상여유와 이득이 분석되었다. 또한 배터리 충/방전을 위한 BPC회로 분석을 통해 배터리 충전 연속모드, 배터리 방전 연속/불연속 모드에서의 입출력 전달함수가 제시되었다.

• Journal of Power Electronics
• /
• 제13권4호
• /
• pp.592-599
• /
• 2013

This paper investigates a new isolated single-phase AC-DC converter, which integrates a modified AC-DC buck-boost converter with a DC-DC forward converter. The front semi-stage is operated in discontinuous conduction mode (DCM) to achieve an almost unity power factor and a low total harmonic distortion of the input current. The rear semi-stage is used for step-down voltage conversion and electrical isolation. The front semi-stage uses a coupled inductor with the same winding-turn in the primary and secondary sides, which is charged in series during the switch-on period and is discharged in parallel during the switch-off period. The discharging time can be shortened. In other words, the duty ratio can be extended. This semi-stage can be operated in a larger duty-ratio range than the conventional AC-DC buck-boost converter for DCM operation. Therefore, the proposed converter is suitable for universal input voltage (90~264 $V_{rms}$) and a wide output-power range. Moreover, the voltage stress on the DC-link capacitor is low. Finally, a prototype circuit is implemented to verify the performance of the proposed converter.

• 한국컴퓨터정보학회논문지
• /
• 제20권7호
• /
• pp.33-40
• /
• 2015

The time slot assignment problem (TSAP) or Satellite Communications scheduling problem (SCSP) for a satellite performs $n{\times}n$ ground station data traffic switching has been known NP-hard problem. This paper suggests $O(n^2)$ time complexity algorithm for TSAP of a satellite that performs $n^2{\times}n^2$ ground station data traffic switching. This problem is more difficult than $n{\times}n$ TSAP as NP-hard problem. Firstly, we compute the average traffic for n-transponder's basic coverage zone and applies ground station exchange method that swap the ground stations until all of the transponders have a average value as possible. Nextly, we transform the D matrix to $D_{LB}$ traffic matrix that sum of rows and columns all of transponders have LB. Finally, we select the maximum traffic of row and column in $D_{LB}$, then decide the duration of kth switch mode to minimum traffic from selected values. The proposed algorithm can be get the optimal solution for experimental data.

• 한국군사과학기술학회지
• /
• 제14권3호
• /
• pp.501-508
• /
• 2011

In this paper, we propose a channel allocation algorithm of MSAP(Mobile Subscriber Access Point) and data delivery scheme exploiting the symbol level network coding. The network is comprised of TS(Tactical Switch) as a backbone node, MSAPs, and TMFTs(Tactical Multi-Function Terminal). The TS performs the channel allocation considering the communication range overlapping between the neighboring MSAPs and applies the symbol level network coding, if necessary, depending on the position of the TMFTs. Assuming the number of available antennas of TMFT and MSAP will be extended to two from one, we propose two schemes: single mode and dual mode. Through the simulation, we show that the proposed delivery scheme provides higher delivery ratio and lower delivery delay compared with the legacy store-and-forward scheme.