• Journal of Welding and Joining
• /
• v.32 no.6
• /
• pp.56-63
• /
• 2014

To develop and understand dissimilar metals joining of Stainless steel and Copper, ultra-high speed laser lap welding was studied using single mode fiber laser in this study. SUS304 and Cu have large differences in materials properties, and Cu and Fe have no intermetallic compounds by typical binary phase of Cu and Fe system. In this study, ultra-high speed lap welds of SUS304 and Cu dissimilar metals using single-mode fiber laser was generated, and weldability of the weld fusion zone was evaluated using a tensile shear test. To understand the phenomenon of tensile shear load, weld fusion zone of interface weld area and fracture parts after tensile shear test were observed using scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDX) analysis system. And it was confirmed that Cu was easily melting and penetrating in the grain boundaries of SUS304 because of low melting temperature. And high thermal conductivity of copper occurred dissipate heat energy rapidly. These properties cause the solidification cracking in weld zone.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.7
• /
• pp.2231-2245
• /
• 2014

Cognitive Radio (CR) has very promising potential to improve spectrum utilization by allowing unlicensed Secondary Users (SUs) to access the spectrum dynamically without disturbing licensed Primary Users (PUs). Mitigating interference is a fundamental problem in CR scenarios. This is particularly problematic for deploying CR in cellular networks, when users are located at the cell edge, as the inter-cell interference mitigation and frequency reuse are critical requirements for both PUs and SUs. Further cellular networks require higher cell edge performance, then SUs will meet more challenges than PUs. To solve the performance decrease for SUs at the cell edge, a novel Dynamic Spectrum Allocation (DSA) scheme based on Game Theory is proposed in this paper. Full frequency reuse can be realized as well as inter-cell interference mitigated according to SUs' sensing, measurement and interaction in this scheme. A joint power/channel allocation algorithm is proposed to improve both cell-edge user experience and network performance through distributed pricing calculation and exchange based on game theory. Analytical proof is presented and simulation results show that the proposed scheme achieves high efficiency of spectrum usage and improvement of cell edge SUs' performance.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.9
• /
• pp.3312-3334
• /
• 2015

In this paper, a mechanism for spectrum allocation in overlay cognitive radio networks is proposed. In overlay cognitive radio networks, the secondary users (SUs) must first sense the activity of primary users (PUs) to identify unoccupied spectrum bands. Based on their different contributions for the spectrum sensing, the SUs get payoffs that are computed by the fusion center (FC). The unoccupied bands will be auctioned and SUs are asked to bid using payoffs they earned or saved. Coalitions are allowed to form among SUs because each SU may only need a portion of the bands. We formulate the coalition forming process as a coalition forming game and analyze it by game theory. In the coalition formation game, debtor-creditor relationship may occur among the SUs because of their limited payoff storage. A debtor asks a creditor for payoff help, and in return provides the creditor with a portion of transmission time to relay data for the creditor. The negotiations between debtors and creditors can be modeled as a Bayesian game because they lack complete information of each other, and the equilibria of the game is investigated. Theoretical analysis and numerical results show that the proposed auction yields data rate improvement and certain fairness among all SUs.

• Journal of the Korean Society for Precision Engineering
• /
• v.8 no.3
• /
• pp.44-54
• /
• 1991

A Study was made on falnk wear in carbide tools in turning SUS304 steel. When an austenitic stainless steel (SUS304 steel) is cut with the tool, saw-toothed chip are produced. It is found that machining SUS304 steel would make a tool worn fast. For increasing productivity, tool wear has to be predicted and controlled. An amended cutting geometry consisting of a negative rake angle ($-6^{\circ}$ ) and a high clearance angle ($-17^{\circ}$ ) is proposed for decreasing carbide tool wear (flank) in the machining of SUS304 steel. The amended cutting geometry is found to make the flank wear lower than a general cutting geometry (rake angle $6^{\circ}$ , clearance angle $5^{\circ}$). The effects of the three cutting variables (cutting speed, feed, tool radius) on the flank wear analyzed by fiting a simple first-order model containing interaction terms to each flank wear parameter by means of regression analysis and the predicted from first-order regression analysis model equation of flank wear.

• Journal of Korean Society of Environmental Engineers
• /
• v.39 no.2
• /
• pp.82-88
• /
• 2017

MET (Microbial Electrochemical Technology), such as MFC (Microbial Fuel Cell) and MEC (Microbial Electrolysis Cell), is a promising technology for producing sustainable biogas from an anaerobic digester (AD). At current stage, however, the most likely limiting factors, large internal resistances, should be overcome for successful scale up of this technology. Various researchers reported that application of electrode materials containing high current density, increase of ion strength and conductivity, configuration of electrode are good methods for minimizing internal resistances. Recently, stainless steel is receiving great attention because of not only high performance and durability but also low cost. Therefore, in this study, we evaluate electrochemical characteristics and biogas production rate using various electrode materials and configuration (graphite carbon coated with catalysts ($GC-C_M$) or not (GC), stainless steel mesh (SUS-M) and plate (SUS-P)). As the results, current densities of $GC-C_M$, GC, SUS-P, SUS-M were 2.03, 1.36, 1.04, $1.13A/m^2$, respectively. Methane yields of $GC-C_M$, GC, SUS-P, SUS-M were 0.27, 0.14, 0.19, 0.21 $L-CH_4/g-COD_{rem}$., respectively. Stainless steel shows high current density and methane yield, which are similar as graphite carbon coated with catalysts.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.23 no.1
• /
• pp.7-14
• /
• 2009

Bile juice prevents deposition of cholesterol in the blood vessel, digests fat, and absorbs fatty acid and vitamins, and it plays a great role on metabolism. Recently, emotional stimulus and mentally over-depression cause a person to come to illness, and westernization of way of life makes more patients with cholelithiasis, resulting into without bile secretion after cholelithotomy. Ageing, and gastrectomy and kidney transplantation are also the causes of more cholelithiasis occurrences. To solve these medical problems, we studied how Fel Sus Scrofa, which is not different from human bile juice, was used in the traditional Korean medicine. We I researched flavor, property, efficacy of Fel Sus Scrofa and how it was used by folk medicine, and we studied the usage examples of Fel Sus Scrofa in Sanghanlon and Dongeuibogam. The property of Sus Scrofa is bitter and cold. Its efficacy is to deposit glycogen. So it is known that it has been widely used, with many edible forms, without any humoral loss, for the inflammatory disease from various fever, problems of urine and feces, cutaneous disease, pulmonary disease, opthalmopathy, fever, thirst from diabetes, hepatocystic duct disorder. Fel Sus Scrofa can be used internally and externally to prevent humoral loss, and to control cutaneous disease among various pediatric disorder full of fever. And as we have in mind that it also can be used to treat patients with cholestasis after cholecystectomy, it is expected that post study of it must be done.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.45 no.5
• /
• pp.778-781
• /
• 2016

Sea urchin skeleton (SUS) generated from production of sea urchin eggs was used as a biodegradable film base material, and its composite film with gelatin was prepared. In addition, Robinia pseudoacacia flower extract (RFE) was incorporated into the film-forming solution to provide antioxidant and anti-microbial activities. The tensile strength (TS) of the SUS/gelatin composite films increased with increasing gelatin content, whereas elongation at break (E) decreased. Among the composite films, SUS/gelatin film at a ratio of 8:2 (w/w) exhibited the most desirable TS and E values. Furthermore, SUS composite film containing RFE showed a reduced TS and increased E compared to the control film. Based on 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulphonic acid) and 2,2-diphenyl-1-picrylhydrazyl radical scavenging assays and disc diffusion results against growth of Listeria monocytogenes, antioxidant and anti-microbial activities of films increased with increasing RFE concentration. Consequently, SUS composite film containing RFE showed proper physical properties as well as antioxidant and anti-microbial activities. These results indicate that SUS can be used as a film base material while the SUS composite film containing RFE can be utilized as active packaging.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.11 no.6
• /
• pp.953-962
• /
• 1987

Domestic dissimilar structural steels, SM 45 C and SUS304 were friction welded under optimal welding condition and the micro-artificial holes were drilled at SM 45 C base metal, SM 45 C HAZ, welded zone, SUS 304 HAZ, and SUS 304 base metal for fatigue behavior tests. In this study, the fatigue limit and the behavior of micro-crack propagation, crack propagation rate, and its dependency on stress intensity factor under the low stress level and high stress level of bending stress have been investigated. The results obtained are as follows. (1) The fatgiue strength of the portion of SM45C B.M., SM45C HAZ, welded zune, SUS304 HAZ and SUS304 B.M. on notched friction welded specimens are 20 kgf/mm$^{2}$, 32 kgf/mm$^{2}$, 27kgf/mm$^{2}$, 29kgf/mm$^{2}$, and 29kgf/mm$^{2}$, respectively. (2) The fatigue strength of welded zone of unnotched and notched specimens are 32.5kgf/mm$^{2}$, and 27kgf/mm$^{2}$, respectively. (3) Micro-crack initiation in the welded zone, HAZ, and each base metals occurrs simultaneously in front and rear of micro-hole tips in the view of the rotational directions. (4) Fatigue crack propagates more slowly in the welded zone than in another protions of specimen, regardless of the magnitude of the stress level. (5) Fatigue crack propagation rates were plotted as a function of stress intensity range. The value of m in the equation da/dN=C(.DELTA.K)$^{m}$ was found to range from 2.09-2.55 in this study.

• Journal of the Korean Society of Safety
• /
• v.7 no.1
• /
• pp.65-72
• /
• 1992

Objective of this research is to evaluate fracture behaviors of fresh-butt welded metal by the acoustic emission technique. The specimens used are medium carbon steel(SM45C), mild steel (SS41) and stainless steel(SUS304), which have different weldability. The similar welding and dissimilar welding processes are considered, in the former SM45C, SS41 and SUS304 are used, in the later the following metals are used SM45C and SS41, SM45C and SUS304 and SS41 and SUS304. The characteristics of fracture in weld metal are eshmated by the tension test with nominal speciemns, the fracture toughness test with compact tension specimens and fractography analysis. The results of tension test show for base metals and similar welding materials that the yield strength and ultimate strength of similar welding materials are increased, the elongation of those are decreased. The weldability of SUS304 is better than that of SM45C and SS41 In similar welding materials. Mechanical properties of dissimilar welding mateiiths we lower than those of similar welding materials. In dissimilar welding materials, the weldability of SM45C and SUS304 is better than that of SM45C and SS41, and also weidability of SS41 and SUS304 is better than SS41 and SM45C. Comparing mechanical properties with AE counts, it is found that AE conuts appeared on a small before the limit load of elasticity(P$_{e}$), and apper greatly near yield strength region in tension test. These results could contribute to the safety analyses and the evaluation of strength for welding structure.e.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.11a
• /
• pp.85-85
• /
• 2003