• Nuclear Engineering and Technology
• /
• v.47 no.7
• /
• pp.939-944
• /
• 2015

The calibration methods of neutron-measuring devices such as the neutron survey meter have advantages and disadvantages. To compare the calibration factors obtained by the shadow cone method and semi-empirical method, 10 neutron survey meters of five different types were used in this study. This experiment was performed at the Korea Atomic Energy Research Institute (KAERI; Daejeon, South Korea), and the calibration neutron fields were constructed using a $^{252}Californium$ ($^{252}Cf$) neutron source, which was positioned in the center of the neutron irradiation room. The neutron spectra of the calibration neutron fields were measured by a europium-activated lithium iodide scintillator in combination with KAERI's Bonner sphere system. When the shadow cone method was used, 10 single moderator-based survey meters exhibited a smaller calibration factor by as much as 3.1-9.3% than that of the semi-empirical method. This finding indicates that neutron survey meters underestimated the scattered neutrons and attenuated neutrons (i.e., the total scatter corrections). This underestimation of the calibration factor was attributed to the fact that single moderator-based survey meters have an under-ambient dose equivalent response in the thermal or thermal-dominant neutron field. As a result, when the shadow cone method is used for a single moderator-based survey meter, an additional correction and the International Organization for Standardization standard 8529-2 for room-scattered neutrons should be considered.

• Journal of The Korean Astronomical Society
• /
• v.34 no.1
• /
• pp.1-8
• /
• 2001

We present a fast reduction method of survey data obtained using a single-dish radio telescope. Along with a brief review of classical method, a new method of identification and elimination of negative and positive bad channels are introduced using cloud identification code and several IRAF (Image Reduction and Analysis Facility) tasks relating statistics. Removing of several ripple patterns using Fourier Transform is also discussed. It is found that BACKGROUND task within IRAF is very efficient for fitting and subtraction of base-line with varying functions. Cloud identification method along with the possibility of its application for analysis of cloud structure is described, and future data reduction method is discussed.

• Journal of the Korean housing association
• /
• v.21 no.3
• /
• pp.105-114
• /
• 2010

Recently, Web-based Survey has attempted to overcome the limitations of Paper-based survey. This method is more effective in costs and time use than traditional methods, also help respondents to understand and interest in the survey. Especially for the elderly, web-based survey is effective survey tool, because audio-visual material could be provied. The purpose of this study is to evaluate the effectiveness of two kinds of methods which were web-based survey and paper-based survey, focused on elderly residents' needs for ubiquitous home service. The participants were older than 60 and divided into 2 groups, web-based survey and paper-based survey, each group was controlled over by age, gender, computer skill. For this study, elderly residents conducted a survey passed through 2 steps, the first was residents' needs for ubiquitous home services, the second was an evaluation of survey methods. Finding were as follows : first, there was no difference between the two groups in needs for ubiquitous home service, so survey itself can not make a difference in survey results. Second, respondents of web-based survey were more interested in and felt easier about method that they conducted than ones of paper-based survey. Finally, Web-based survey will be more effective method to be figure out the need of the elderly who are familiar with computer.

• Survey Research
• /
• v.6 no.2
• /
• pp.51-74
• /
• 2005

The internet survey methods have been more and more widely used as the coverage of the fixed-line telephone is being reduced due to the diffusion of mobile phone. So, there is a need to know the accuracy of this new survey method. This study aims to estimate the accuracy of the internet survey method and identify the factors affecting the accuracy of this method, For this purpose, we analyzed the election poll data during the 17th general election period. These data include fixed-line telephone survey data, internet survey data, mobile phone survey data and the election voting data. The analysis shows that the prediction errors of the internet survey were a little more than those of the telephone or mobile phone survey. But the differences are not significant. It follows from this result that we can use the internet survey method in social survey context. This study also found that the respondent's willingness to participate in the survey, the probability of being at home during survey and the respondent's educational level were affecting the accuracy of the internet survey. Further studies to develop weighting method with these factors are needed.

• Journal of the Korea Safety Management & Science
• /
• v.15 no.2
• /
• pp.223-232
• /
• 2013

Other comments on matters satisfaction survey through questionnaires typically measure by frequency analysis method is performed, the short answer for how to apply. These satisfaction surveys, however, because of the environment and atmosphere of its target at the time of the survey, personal psychological state, depending on the scale of change in business or policy of customer satisfaction feedback, there is a problem. This survey results, tangible results in terms of the feasibility of the business and policy indirectly as a result, which has been used as a material fact is. New survey method is show how the business and policy objectives than can be reflected positively in the present study, and comparing these surveys in a variety of ways for the analytical method proposed by KANO, Timko results suggested. Should be an ongoing investigation, and different survey methods for the study on the same sample the actual observed by comparing the results for the superiority of the new results presented.

• Survey Research
• /
• v.4 no.2
• /
• pp.47-62
• /
• 2003

Based upon the Labor Demand Survey and the Survey on Wage Structure being conducted annually by the Ministry of Labor, we suggest a convenient statistical tool which can analyze and appraise the effect of introducing a new survey method. Since both surveys have in common very similar sampling frames and sampling schemes in structure, one can measure the variability of one survey on the basis of the other. The influence appraisal method adopted here is applied to ratio data between two independent estimates belonging to the identical category by year and has a statistical form of comparing ratio data before introducing a new survey with those after introducing a new survey.

• Journal of the Korean Data and Information Science Society
• /
• v.13 no.1
• /
• pp.35-45
• /
• 2002

For improving the quality of survey dat a of sensitive character, we suggest a conditional in direct survey method. In th at method, only the respondents who answer directly to the less sensitive question respond indirectly to the more sensitive one by using the one sample unrelated question randomized response technique with the known $\pi_y$, the true proportion of unrelated group Y. We extend it to two sample method when $\pi_y$ is unknown. We also consider the case that people who possess less sensitive character answer untruthfully. Finally we compare our method with the methods of Greenberg et al. and Carr et al..

• Proceedings of the Korean Geotechical Society Conference
• /
• 2009.03a
• /
• pp.961-965
• /
• 2009

Using much electric resistivity survey to design or preservation administration of facilities. However, By survey method that electric resistivity survey grasps special quality in base by potential difference creating artificial current in underground, Is influenced in electric resistance propensitys of various underground utilities in base. This Study selects dam 1 place that could grasp well underground situation and studied electricity interference effect by effect of underground utilities. Grasp underground utilities of dam interior, and control and observed accuracy with survey wave because various pole space. Through this Study, wish to present survey method of electric resistivity survey at design or survey of preservation administration dimension after with drawn result.

• Survey Research
• /
• v.1 no.1
• /
• pp.73-108
• /
• 2000

This study investigates methodological implications of cyberspace and information technology for online survey research Online survey method provides useful methodological tools for collecting empirical data for the study of cyberspace, In terms of sampling frame , selection method, and questionnaire from four major types of the online survey research can be found: member survey visitor survey e-mail survey and the electronic survey. Online survey research with sample design(population specification error. sampling frame error, selection error) measurement (measurement instrument bias system-related processing error, nonrespone, and response bias) and research ethics (privacy and netiquette) pose important methodological issues for the survey. The realization of the technological possibilities of online survey will be possible only through a right consideration of these issues.

• Communications for Statistical Applications and Methods
• /
• v.10 no.2
• /
• pp.319-324
• /
• 2003

In this paper, we review three cards method by Droitcour et al.(2001). And we compare indirect survey methods - randomized response technique, item count method, nominative technique.