Journal of the Korean Association of Oral and Maxillofacial Surgeons
/
v.45
no.6
/
pp.343-350
/
2019
Objectives: The aims of this study were to determine the effectiveness of local compression in patients presenting to the emergency room with intraoral bleeding and to identify when complex haemostatic measures may be required. Materials and Methods: Five hundred forty patients who had experienced intraoral haemorrhage were retrospectively reviewed. The outcome variable was the haemostasis method used, i.e., simple (local compression with gauze) or complex (an alternative method after local compression has failed). Predictor variables were sex, age, American Society of Anesthesiologists (ASA) class, hepatic cirrhosis, bleeding disorder, use of antithrombotic agents, and site/cause of haemorrhage. Results: The mean patient age was 48.9±23.9 years, 53.5% were male, 42.8% were ASA class II or higher, and 23.7% were taking antithrombotic agents. Local compression was used most often (68.1%), followed by local haemostatic agents, sutures, systemic tranexamic acid or blood products, and electrocautery. The most common site of bleeding was the gingiva (91.7%), and the most common cause was tooth extraction (45.7%). Risk factors for needing a complex haemostasis method were use of antithrombotic agents (odds ratio 2.047, P=0.009) and minor oral surgery (excluding extraction and implant procedures; odds ratio 6.081, P=0.001). Conclusion: A haemostasis method other than local compression may be needed in patients taking antithrombotic agents or having undergone minor oral surgery.
Kim, Joo-Hak;Ahn, Chang Hwan;Kim, Sunje;Lee, Won Suk;Oh, Sang-Ha
Archives of Craniofacial Surgery
/
v.20
no.2
/
pp.76-83
/
2019
Background: The mental V-Y advancement flap method is useful for reconstruction of lower lip defect because of its many advantages. However, it is not easy to select the optimal reconstructive method for the vermilion defect that remains after application of the mental V-Y advancement flap. In choosing the representative surgical method for vermilion mucosal reconstruction including mucosal V-Y advancement flap, buccal mucosal flap, and buccal mucosal graft. We describe an efficient technique to large lower lip defects combining mental V-Y advancement flap and buccal mucosal graft Methods: This study included 16 patients who underwent reconstructive surgery for full-thickness and large defect (> half the entire width) of the lower lip from October 2006 to September 2017. The operation was conducted using mental V-Y advancement flap with various vermilion mucosal reconstruction methods considering the location of the defect and the amount of residual tissue of the lip coloboma after excision. Results: All patients underwent mental V-Y advancement flap. In vermilion mucosal reconstruction, five patients underwent mucosal V-Y advancement flap, three underwent buccal mucosal flap, and eight underwent buccal mucosal graft. There were good aesthetic and functional results in all patients who underwent buccal mucosal graft. However, two patients who underwent mucosal V-Y advancement flap complained of oral incompetence, and all patients who underwent buccal mucosal flap had oral commissure deformity. Conclusion: Buccal mucosal graft combined with mental V-Y advancement flap can produce suitable functional and aesthetic outcomes in near total lower lip reconstruction in patient with large mucosal defect including vermilion portion.
Song Gin-Ah;Myung Hoon;Hwang Soon-Jung;Seo Byoung-Moo;Lee Jong-Ho;Choung Pill-Hoon;Kim Myung-Jin;Choi Jin-Young
Korean Journal of Cleft Lip And Palate
/
v.6
no.1
/
pp.17-25
/
2003
Correction of the cleft-lip nasal deformity is a difficult task that requires clear understanding of the associated complex anatomy and function as well as the operation time, the selection of an operation method, On the expectation that it helps enhance understanding the current trend of cleft-rhinoplasty, authors analyzed secondary rhinoplasty between 1999 and 2002, In both the unilateral and bilateral cleft lip rhinoplasty, we reviewed the timing of repair, site of correction and it's major technique, incision or approach method, autogenous cartilage graft method, All patients with a septal deviation did not have a septal surgery, We were active in alar and nasal tip surgery and passive in septal and dorsal deformity correction, And for children, we used a conservative method but for adults, we used radical approach, Most surgeries are focused on esthetic goal and we thought that objective evaluation for nasal obstruction was needed for bener and predictable outcome.
Journal of the Korean Association of Oral and Maxillofacial Surgeons
/
v.38
no.5
/
pp.276-283
/
2012
Objectives: Curettage and enucleation are two of the most common procedures performed in oral and maxillofacial surgery units. To access a cystic lesion, the buccal cortical plate is removed. The no reposition (NR) group underwent surgery without repositioning the buccal cortical plate. The reposition (R) group underwent surgery with a repositioning of the buccal cortical plate. This study compared the two surgical procedures in terms of bone healing and complications. Materials and Methods: Patients who underwent curettage and enucleation surgery were enrolled in this study. Panoramic radiographs of the patients in both the NR group (n=26) and R group (n=34) were taken at the baseline and at 6, 12 and 24 months after surgery. The radiolucent area was calculated to evaluate bony healing in each radiograph. The complications were analyzed through a review of the medical records. Results: The correlation between bony healing and surgical approach was not significant in the 6th, 12th, and 24th month (P<0.05). The complication rate was not associated with gender, graft material, bone graft and drain insertion (P<0.05). On the other hand, the R group had a higher complication rate (35.3%) than the NR group (0%). The difference in the mean lesion size between the NR group ($37,024{\pm}3,617$ pixel) and R group ($92,863{\pm}15,931$ pixel) was significant (independent t test, P=0.004). Conclusion: Although the reposition method is chosen when the lesion size is large, it is associated with more complications. Indeed, infection, discomfort and recurrence of the lesion were the most common complications in the R group. Furthermore, the R method does not have a strong point in terms of bone healing compared to the NR method. Therefore, the R method cannot be considered an ideal approach and should be used in limited cases.
Background: Along with the advances in technology of three-dimensional (3D) printer, it became a possible to make more precise patient-specific 3D model in the various fields including oral and maxillofacial surgery. When creating 3D models of the mandible and maxilla, it is easier to make a single unit with a fused temporomandibular joint, though this results in poor operability of the model. However, while models created with a separate mandible and maxilla have operability, it can be difficult to fully restore the position of the condylar after simulation. The purpose of this study is to introduce and asses the novel condylar repositioning method in 3D model preoperational simulation. Methods: Our novel condylar repositioning method is simple to apply two irregularities in 3D models. Three oral surgeons measured and evaluated one linear distance and two angles in 3D models. Results: This study included two patients who underwent sagittal split ramus osteotomy (SSRO) and two benign tumor patients who underwent segmental mandibulectomy and immediate reconstruction. For each SSRO case, the mandibular condyles were designed to be convex and the glenoid cavities were designed to be concave. For the benign tumor cases, the margins on the resection side, including the joint portions, were designed to be convex, and the resection margin was designed to be concave. The distance from the mandibular ramus to the tip of the maxillary canine, the angle created by joining the inferior edge of the orbit to the tip of the maxillary canine and the ramus, the angle created by the lines from the base of the mentum to the endpoint of the condyle, and the angle between the most lateral point of the condyle and the most medial point of the condyle were measured before and after simulations. Near-complete matches were observed for all items measured before and after model simulations of surgery in all jaw deformity and reconstruction cases. Conclusions: We demonstrated that 3D models manufactured using our method can be applied to simulations and fully restore the position of the condyle without the need for special devices.
Kim, Hye-Young;Oh, Deuk-Young;Lee, Woo-Sung;Moon, Suk-Ho;Seo, Je-Won;Lee, Jung-Ho;Rhie, Jong-Won;Ahn, Sang-Tae
Archives of Plastic Surgery
/
v.37
no.5
/
pp.633-638
/
2010
Purpose: Orbital bone is one of the most complex bones in the human body. When the patient has a fracture of the orbital bone, it is difficult for the surgeon to restore the fractured orbital bone to normal anatomic curvature because the orbital bone has complex curvature. We developed a rapid prototyping model based on a mirror image of the patient's 3D-CT (3 dimensional computed tomography) for accurate reduction of the fractured orbital wall. Methods: A total of 7 cases of large orbital wall fracture recieved absorbable plate prefabrication using rapid prototyping model during surgery and had the manufactured plate inserted in the fracture site. Results: There was no significant postoperative complication. One patient had persistent diplopia, but it was resolved completely after 5 weeks. Enophthalmos was improved in all patients. Conclusion: With long term follow-up, this new method of orbital wall reduction proved to be accurate, efficient and cost-effective, and we recommend this method for difficult large orbital wall fracture operations.
Operations using the da Vinci robot have performed in for many surgeries, but the adoption of robotics to general thoracic surgery has been slow. The patient (age 74, male) visited our hospital complaining of hiccups and dysphagia. The CT scan and endoscopic biopsy revealed esophageal cancer (squamous cell carcinoma). We performed transthoracic esophagectomy using a da Vinci robot and this was followed by gastric tube mobilization via laparoscopy. Cervical esophago-gastric anastomosis was done using the hand-sewn method. The gastric tube was brought into the neck through the retrosternal route. The patient was discharged without any complications. We report here on a case of successful da Vinci robotic esophgagectomy.
Park, Si-Yeon;Hwang, Dae-Seok;Song, Jae-Min;Kim, Uk-Kyu
Maxillofacial Plastic and Reconstructive Surgery
/
v.41
/
pp.35.1-35.7
/
2019
Background: The purpose of this study was to measure the time of the conventional surgical planning (CSP) and virtual surgical planning (VSP) in orthognathic surgery and to compare them in terms of cost. Material and method: This is a retrospective study of the patients who underwent orthognathic surgery at the Pusan National University Dental Hospital from December 2017 to August 2018. All the patients were analyzed through both CSP and VSP, and all the surgical stents were fabricated through manual and three-dimensional (3D) printing. The predictor variables were the planning method (CSP vs. VSP) and the surgery type (group I: Le Fort I osteotomy + bilateral sagittal split osteotomy [LFI+BSSO] or group II: only bilateral sagittal split osteotomy [BSSO]), and the outcomes were the time and cost. The results were analyzed using the paired t test. Results: Thirty patients (12 females, 18 males) met the inclusion criteria, and 17 patients were excluded from the study due to missing or incomplete data. There were 20 group I patients (LFI+BSSO regardless of genioplasty) and 10 group II patients (BSSO regardless of genioplasty). The average time of CSP for group I was 385 ± 7.8 min, and that for group II was 195 ± 8.33 min. The time reduction rate of VSP compared with CSP was 62.8% in group I and 41.5% in group II. On the other hand, there was no statistically significant cost reduction. Conclusions: The time investment in VSP in this study was significantly smaller than that in CSP, and the difference was greater in group I than in group II.
Kim, Hyo Young;Kim, Sin Rak;Park, Jin Hyung;Han, Yea Sik
Archives of Plastic Surgery
/
v.39
no.6
/
pp.612-617
/
2012
Background Packing after closed reduction of a nasal bone fracture causes inconvenient nasal obstruction in patients. We packed the superior meatus with Vaseline gauze to support the nasal bone, and packed the middle nasal meatus with a Doyle Combo Splint consisting of an airway tube, a silastic sheet, and an expandable sponge to reduce the inconvenience. In addition, we aimed to objectively identify whether this method not only enables nasal respiration but also sufficiently supports the reduced nasal bone. Methods Nasal ventilation was measured via spirometry 1 day before surgery and compared to 1 day after surgery. To compare support of the reduced nasal bone by the 2 methods, 2 plastic surgeons assessed the displacementon X-rays taken after the surgery and after removing the packing. The extent of nasal obstruction, dry mouth, sleep disturbance, headache, and swallowing difficulty were compared with visual analog scales (VAS) on a pre-discharge survey. Results In the experimental group, the nasal respiration volume 1 day after surgery remained at $71.3%{\pm}6.84%$ on average compared to 1 day prior to surgery. Support of the reduced bone in the experimental group ($2.80{\pm}0.4$) was not significantly different from the control group ($2.88{\pm}0.33$). The VAS scores for all survey items were lower in the experimental group than in the control group, where a lower score indicated a lower level of inconvenience. Conclusions The nasal cavity packing described here maintained objective measures of nasal respiration and supported the reduced bone similar to conventional methods. Maintaining nasal respiration reduced the inconvenience to patients, which demonstrates that this packing method is useful.
Typical surgical methods for the treatment of mandibular fractures include intermaxillary-fixation (IMF) for obtaining temporary intraoperative occlusion. Traditionally IMF has been achieved with arch-bars or interdental eyelet wiring. However, these techniques are time-consuming procedures, can produce periodontal damage, and are not well tolerated by the patient even under local anesthesia. Moreover, daily maintenance of oral hygiene is difficult for patients with an arch bar. Recently, intermaxillary fixation using intraoral skeletal anchorage screws (SAS) has been introduced for the treatment of mandibular fractures. This method solves the problems above, but they have the potential for tooth damage, screw fractures and intraoperative occlusal instability. In this study, patients with mandiblular fractures were divided into three groups. Group 1 was treated by IMF using archbars(both maxilla and mandible), Group 2 was treated with SAS(maxilla) and arch-bar (mandible), Group 3 was treated with SAS(both maxilla and mandible). The aim of this study was to evaluate the influence of the different IMF methods on periodontal tissue health and intraoperative occlusal rehabilitation about each groups, and to discuss the most favorable IMF method.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.