• Journal of The Geomorphological Association of Korea
• /
• v.25 no.2
• /
• pp.31-42
• /
• 2018

This study analyzes the spatial distribution of the highest level terrace which can be regarded as an initial land surface before the uplift of the Taebaek Mountains and estimates spatial characteristics of the incision and uplift rates around the Mountains. The altitude above the riverbed of the 54 highest level terraces seems to be greatly influenced by the incision of large stream and their elevation shows a high correlation with the uplift of the Mountains. The elevation of the terraces in the north and middle parts decreases westward with a rate of 5~6 m/km and meets with the sea level at area 100~120 km apart from the Mountains. Therefore, it can be suggested that the west coast of Korea might have generally experienced subsidence during the Quaternary. The elevation of the terraces suggests that area with a direction of N-S or NNW-SSE from Yeoryang-myeon, Jeongseon-gun to Taebaek-si shows the highest uplift rate around the Mountains and area with a direction of N-S connecting Girin-myeon, Inje-gun and Pyeongchang-eup, Pyeongchang-gun also indicates a high uplift rate.

• New & Renewable Energy
• /
• v.9 no.2
• /
• pp.15-22
• /
• 2013

The solar energy are an infinite source of energy and a clean energy without secondary pollution. The global solar energy reaching the earth's surface can be calculated easily according to the change of latitude, altitude, and sloped surface depending on the amount of the actual state of the atmosphere and clouds. The high-resolution solar-meteorological resource map with 1km resolution was developed in 2011 based on GWNU (Gangneung-Wonju National University) solar radiation model with complex terrain. The very high resolution solar energy map can be calculated and analyzed in Seoul and Eunpyung with topological effect using by 1km solar-meteorological resources map, respectively. Seoul DEM (Digital Elevation Model) have 10m resolution from NGII (National Geographic Information Institute) and Eunpyeong new town DSM (Digital Surface Model) have 1m spatial resolution from lidar observations. The solar energy have small differences according to the local mountainous terrain and residential area. The maximum bias have up to 20% and 16% in Seoul and Eunpyung new town, respectively. Small differences are that limited area with resolutions. As a result, the solar energy can calculate precisely using solar radiation model with topological effect by digital elevation data and its results can be used as the basis data for the photovoltaic and solar thermal generation.

• Korean Journal of Remote Sensing
• /
• v.22 no.1
• /
• pp.49-61
• /
• 2006

The lifting scheme has been found to be a flexible method for constructing scalar wavelets with desirable properties. In this paper, it is extended to the UDAR data compression. A newly developed data compression approach to approximate the UDAR surface with a series of non-overlapping triangles has been presented. Generally a Triangulated Irregular Networks (TIN) are the most common form of digital surface model that consists of elevation values with x, y coordinates that make up triangles. But over the years the TIN data representation has become an important research topic for many researchers due its large data size. Compression of TIN is needed for efficient management of large data and good surface visualization. This approach covers following steps: First, by using a Delaunay triangulation, an efficient algorithm is developed to generate TIN, which forms the terrain from an arbitrary set of data. A new interpolation wavelet filter for TIN has been applied in two steps, namely splitting and elevation. In the splitting step, a triangle has been divided into several sub-triangles and the elevation step has been used to 'modify' the point values (point coordinates for geometry) after the splitting. Then, this data set is compressed at the desired locations by using second generation wavelets. The quality of geographical surface representation after using proposed technique is compared with the original UDAR data. The results show that this method can be used for significant reduction of data set.

• Journal of The Geomorphological Association of Korea
• /
• v.25 no.1
• /
• pp.31-45
• /
• 2018

This study investigated the characteristics of sedimentary environment changes across a tidal flat in Gagyeongju of Anmyeondo Island. We performed a spatio-temporal analysis on the grain sizes composition of sediments and micro-landform changes during the winter from 2013 to 2016. The results showed that erosion was a dominant processthroughout the study flat, reducing the surface elevation even by 1 m around the upper sand flat. As a consequence, headlands have formed in the entire region of Gagyeongju village. In addition, erosion quickly progressed along the low-lying subtidal zone and tide way and, in contrast, sedimentation progressed in the mid-elevation tidal flat. We posit that a jetty, which had been constructed as a pier facility on the eastern part of the study area, interfered with the flow of tidal current, thereby enhancing these erosional processes. This is because such interference can block the supply of fine-textured sediments from the nearby Cheonsu Bay and therefore reduce surface elevation. According to the surface sediment analysis, the sediments were categorized into 7 sedimentary facies, and generally displayed a high ratio of silt and clay. The result of time-series analysis (2012-2013) showed that the sediments on the tidal flat became fine-grained, and that sorting became worse. However, the sediments on the subtidal zone, embayment and along inside of the jetty tended to be coarse-grained. In conclusion, the tidal flat microlandform change in the study area was caused by a disruption in the seawater circulation due to the jittery construction within the tidal flat, which had a direct effect on erosional and sedimentary environment processes.

• Proceedings of the Korean Geotechical Society Conference
• /
• 1999.10a
• /
• pp.371-378
• /
• 1999

A prototype computer program was developed which visualizes various kinds of geotechnical information using 3D object graphics techniques. The program integrates various kinds of geotechnical data such as surface geology map, boreholes data, geophysical data as well as man made subsurface structures. It also reads NGIS DXF map and generates digital elevation model from iso-elevation line layer of the DXF map. All the data are put into a 3D model as 3D objects. The created 3D model can be viewed and analysed in a interactive 3D way.

• Korean Journal of Remote Sensing
• /
• v.33 no.3
• /
• pp.313-324
• /
• 2017

A lava tube is one of the hot issues of lunar science because it is regarded as a good candidate place for setting a lunar base. Recently much effort has been made to find lunar lava tubes. However, preceding works mainly made use of high-resolution lunar surface image data in conjunction with geomorphological consideration to present some lava tube candidates. Yet, those candidates stay no more than indirect indications. We propose a new data analysis technique of High Frequency (HF) radar observation data to find lunar lava tubes of which location depth is smaller than the range resolution of the radar pulse. Such shallow target echoes cannot be resolved from surface echoes, which presents the different location of the lunar surface compared to that of real lunar surface. The proposed technique instead finds the surface range (distance from LRS to the reflector of the most intense signal) anomaly which occurs as a result of the low range resolution of LRS pulse. We applied this technique to the surface range of Kaguya Lunar Radar Sounder (LRS) data. The surface range was deduced to make LRS surface elevation which was compared with the average surface elevation of Kaguya Digital Terrain Model (DTM). An anomalous discrepancy of the surface elevation was found in the Rima Galilaei area, which suggests the existence of a shallow lava tube.

• Journal of the Society of Naval Architects of Korea
• /
• v.45 no.2
• /
• pp.132-143
• /
• 2008

The sloshing phenomena in a two-dimensional rectangular tank are investigated using a level set method based on finite volume method. The code validations are performed by comparing between the present results and previous numerical results, which gives a good agreement. We present the streamlines pattern, free surface shape, maximum free surface elevation and pressure fluctuation patterns in the tank under the pitch and surge motions with various frequencies. These two different motions cause the different flow structures in the tank. The time variations of surface elevation and pressure at the different locations in the tank strongly depend on the exciting frequency of tank moving.

• Journal of Korean Society of Environmental Engineers
• /
• v.36 no.8
• /
• pp.570-578
• /
• 2014

A three-dimensional ocean circulation model was applied to a shallow estuary, Mobile Bay, to study local wind setup and setdown. Tides started from the northern Gulf of Mexico propagates up to the Mobile River system which is located in the north of the Mobile Bay. However, the tides started in the south of Mobile Bay were distorted when travelling upstream while affected by river discharge and local winds. The water surface elevation was less/over predicted responding north/south winds, respectively, when winds only at the Dauphin Island station (DPI) were used. However, the model predicted water surface elevation better when using two local winds from DPI and Mobile Downtown Airport (MDA). Wind speeds were greatly reduced (~ 88%) in about 43 km distance between DPI and MDA, and the canopy effects may be the reason for this. For this reason, the local winds are greatly responsible for local surface elevation setup and setdown especially at the shallow estuary like Mobile Bay.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.47 no.2
• /
• pp.168-173
• /
• 2014

The effect of critical minimum depth in the coastal region on storm surges was examined using a three-dimensional primitive equation model (POM). Case studies using numerical experiments in a small coastal bay in the southern sea of Korea (Hanam Bay) have examined the 'critical depth' (CD) that stabilizes the numerical calculations. Dependence of the CD of typhoon tracks and tidal components such as M2, S2, O1, and K1 were examined. The model results clearly demonstrated that the numerically unstable state of the calculation was caused by the coarse resolution of sea surface elevation.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2000.11a
• /
• pp.262-265
• /
• 2000

In order to estimate spatial physicochemical properties of the spring waters in the study area, spring waters at 57 sites were investigated for measuring ten items (temperature, pH, Eh, EC, TDS, DO, salinity, alkalinity, discharge rate, and surface elevation), To compare each component with one another, regression analysis was carried out. Kriging was used to estimate the spatial characteristics and continuity of data in the study area. To solve kriging equation, the semivariogram was calculated using geostatistical software GS$^{+}$(version 3.1). As a result of semivariogram analysis, the data of nine components but surface elevation could be assumed as stationary random function, and ordinary kriging method was used for making contour maps.s.