• Journal of Radiation Protection and Research
• /
• v.48 no.4
• /
• pp.197-203
• /
• 2023

Background: The thermoluminescent dosimeter (TLD) and Monte Carlo (MC) dosimetry are carried out to determine the occupational dose for personnel in the handling of ¹²⁵I seed sources. Materials and Methods: TLDs were placed in different layers of the Alderson-Rando phantom in the thyroid, lung and also eyes and skin surface. An ¹²⁵I seed source was prepared and its activity was measured using a dose calibrator and was placed at two distances of 20 and 50 cm from the Alderson-Rando phantom. In addition, the Monte Carlo N-Particle Extended (MCNPX 2.6.0) code and a computational phantom with a lattice-based geometry were used for organ dose calculations. Results and Discussion: The comparison of TLD and MC results in the thyroid and lung is consistent. Although the relative difference of MC dosimetry to TLD for the eyes was between 4% and 13% and for the skin between 19% and 23%, because of the existence of a higher uncertainty regarding TLD positioning in the eye and skin, these inaccuracies can also be acceptable. The isodose distribution was calculated in the cross-section of the head phantom when the ¹²⁵I seed was at two distances of 20 and 50 cm and it showed that the greatest dose reduction was observed for the eyes, skin, thyroid, and lungs, respectively. The results of MC dosimetry indicated that for near the head positions (distance of 20 cm) the absorbed dose rates for the eye lens, eye and skin were 78.1±2.3, 59.0±1.8, and 10.7±0.7 µGy/mCi/hr, respectively. Furthermore, we found that a 30 cm displacement for the ¹²⁵I seed reduced the eye and skin doses by at least 3- and 2-fold, respectively. Conclusion: Using a computational phantom to monitor the dose to the sensitive organs (eye and skin) for personnel involved in the handling of ¹²⁵I seed sources can be an accurate and inexpensive method.

• Korean Journal of Organic Agriculture
• /
• v.32 no.1
• /
• pp.107-125
• /
• 2024

Three types of veterinary antibiotics, including oxytetracycline (OTC) and chlortetracycline (CTC) of tetracycline class and amoxicillin (AMX) of penicilline class, were artificially introduced into the irrigation water. The residue of veterinary antibiotics in the soil, the absorption-translocation of veterinary antibiotics into the red lettuce and young radish plant, and crops yield were investigated according to the agricultural water irrigation method (surface drip irrigation, underground drip irrigation, and sprinkler irrigation). There was no significant difference in the residue and translocation of veterinary antibiotics in the soils and crops according to the irrigation method and type of veterinary antibiotics (p>0.05). For the edible parts of red lettuce and young radish, all three types of veterinary antibiotics were found to be below the detection limit, indicating that the safety of the crops was secured. The translocation factor of red lettuce and young radish were found to be less than 0.3 and 0.2, respectively. However, continuous introduction of veterinary antibiotics in agricultural arable lands may have negative effects by affecting soil microbial activity and soil microbe species diversity, so continuous management is deemed necessary.

• Journal of the Korean earth science society
• /
• v.45 no.3
• /
• pp.173-191
• /
• 2024

Typhoons are significant meteorological phenomena that cause interactions among the ocean, atmosphere, and land within Earth's system. In particular, wind speed, a key characteristic of typhoons, is influenced by various factors such as central pressure, trajectory, and sea surface temperature. Therefore, a comprehensive understanding based on actual observational data is essential. In the 2015 revised secondary school textbooks, typhoon wind speed is presented through text and illustrations; hence, exploratory activities that promote a deeper understanding of wind speed are necessary. In this study, we developed a data visualization program with a graphical user interface (GUI) to facilitate the understanding of typhoon wind speeds with simple operations during the teaching-learning process. The program utilizes red-green-blue (RGB) image data of Typhoons Mawar, Guchol, and Bolaven -which occurred in 2023- from the Korean geostationary satellite GEO-KOMPSAT-2A (GK-2A) as the input data. The program is designed to calculate typhoon wind speeds by inputting cloud movement coordinates around the typhoon and visualizes the wind speed distribution by inputting parameters such as central pressure, storm radius, and maximum wind speed. The GUI-based program developed in this study can be applied to typhoons observed by GK-2A without errors and enables scientific exploration based on actual observations beyond the limitations of textbooks. This allows students and teachers to collect, process, analyze, and visualize real observational data without needing a paid program or professional coding knowledge. This approach is expected to foster digital literacy, an essential competency for the future.

• Applied Chemistry for Engineering
• /
• v.35 no.4
• /
• pp.316-320
• /
• 2024

To optimize the emulsion stability and antibacterial activity against Escherichia coli (E. coli) of cosmeceuticals using Scutellaria baicalensis extracts and olive wax as natural emulsifiers, we conducted a study. The independent variables were the amounts of Scutellaria baicalensis extracts and olive wax added. The response variables included the emulsion stability index (ESI) of the cosmeceuticals product and the inhibition diameter against E. coli. Through central composite design-response surface methodology (CCD-RSM), we obtained a statistically significant and reliable regression equation within a 95% confidence interval. By optimizing multiple responses, we determined that the optimal emulsification conditions that satisfied both ESI and E. coli inhibition diameter were 3.7 wt% of Scutellaria baicalensis extracts and 2.7 wt% of olive wax. The predicted ESI and E. coli inhibition diameter were 97.9% and 9.7 mm, respectively. When actual experiments were conducted under the optimal conditions, the measured ESI and E. coli inhibition diameter were 95.0% and 9.4 mm, respectively, with an average error rate of 3.2 ± 0.4%.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.17 no.2
• /
• pp.73-80
• /
• 2009

Biofilters use porous solid media to support microorganisms and allow access to the contaminants in the airflow. The characteristics of media used in biofilters vary greatly, and therefore it is important to select the appropriate media in order to obtain a large enough surface attachment area and uniform pore. This study was performed to compare hydrogen sulfide ($H_2S$) removal efficiencies of three biofilter media; coconut fiber, ceramic, and polyurethane. The biofilter packed with coconut fiber showed stable removal activity when inlet loading was changeable, and was restored rapidly when the moisture content decreased. However, the coconut fiber suffered from low durability. To cope with this problem a media of fibrinous polypropylene was developed to strengthen the durability of the coconut fiber. Biofilter column experiments using the fibrinous polypropylene media demonstrated over 99% of removal efficiencies at pH as low as 3 and 6 seconds of EBRT (empty bed gas residence time). Due to its superior physical characteristics, it is expected that the $H_2S$ treatment performance will increase when the new fibrinous polypropylne media is applied in commercial biofilter systems.

• Korean Chemical Engineering Research
• /
• v.52 no.5
• /
• pp.688-693
• /
• 2014

For investigating NO reduction activity of an catalytic filter, the catalytic performance was measured under the presence of $SO_2$ and $H_2O$, respectively or simultaneously in the simulation gas composed of NO, $NH_3$, and air. The catalytic filter was prepared by coating $V_2O_5-WO_3/TiO_2$ catalyst on the pore surface of SiC filter element of which the superior performance for the particulate removal was well known. At the temperature below $260^{\circ}C$, the catalytic activities were enormously decreased under the presence of $SO_2$ and $H_2O$, respectively or simultaneously, compared with those under the cases of the absence of $SO_2$ and $H_2O$. However, the presence of $SO_2$ promoted the performance of the catalytic filter above $320^{\circ}C$ with showing the NO conversion better than 99.8% for the NO inlet concentration of 500 ppm and at the face velocity of 2 cm/s. In particular, the presence of water showed high NO conversion higher than 99% up to high temperature of $380^{\circ}C$. This effect of water was explained by the reason that it retarded the ammonia oxidation which is the main step into the formation of $N_2O$. The initial NO reduction activity of the catalytic filter maintained for the duration of 100 hours in the presence of $SO_2$ and $H_2O$. Therefore, it was concluded that the catalytic filter was promisingly useful for the industrial NOx reduction catalyst in order to treat the particulate and NO simultaneously.

• Journal of Oral Medicine and Pain
• /
• v.30 no.4
• /
• pp.411-426
• /
• 2005

The purpose of this study was to investigate the effects of occlusal condition and clenching level on the mandibular torque rotational movement. For this study, healthy 14 men without any symptoms and signs of temporomandibular disorders were selected. Mandibular torque rotational movement was observed in each circumstance of combination of three occlusal conditions such as natural dentition, with wafer of 3.6 mm thickness, and wafer with resin stop of 14 mm thickness total during hard biting of bite stick at maximum voluntary contraction(MVC) and 50% of MVC level of surface EMG activity of masseter muscle. Electromyographic activity and mandibular torque rotational movement were observed using BioEMG and BioEGN in $BioPak^{(R)}$ system. Each biting movement in each circumstance was composed of clenching one time and hard biting of wooden stick two times. The observed items were opening distance, velocity and amount of torque rotational movement in mandibular movement, and the data were statistically processed with $SPSS^{(R)}$ windows (ver.10.0). The results of this study were as follows: 1. There were no differences in the mandibular movement distance between those value in both biting sides, and between those in both clenching forces, but the mandibular velocity showed a different results by clenching force. For the amount of torque rotational movement, there were no difference in the value of the frontal plane but some significant difference was in the value of the horizontal plane by biting side. 2. The mandibular movement distance and the mandibular velocity in both planes were higher by maximum voluntary contraction than those by half maximum voluntary contraction, and amount of torque rotational movement in the horizontal plane was also increased by maximum voluntary contraction. 3. The opening distance in both planes were decreased with the increase of vertical dimension of occlusion, namely, by the occlusal appliances, and this pattern was also showed in the mandibular velocity in case of hard biting by maximum voluntary contraction. However, the amount of torque rotational movement were not different by the increase of vertical dimension of occlusion. 4. The value of angle and distance of the torque rotational movement in the hard biting of wooden stick were generally higher than those in the clenching without wooden stick in both planes without regard to occlusal conditions and/or clenching forces.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.4
• /
• pp.368-375
• /
• 2006

Single and complex metal oxide catalysts supported onto a commercial DT51D $TiO_2$ have been investigated for gas-phase TCE oxidation in a continuous flow type fixed-bed reaction system to develop a better design approach to catalysts for this reaction. Among the $TiO_2$-supported single metal oxides used, i.e., $CrO_x,\;FeO_x,\;MnO_x,\;LaO_x,\;CoO_x,\;NiO_x,\;CeO_x\;and\;CuO_x$, with the respective metal contents of 5 wt.%, the $CrO_x/TiO_2$ catalyst was shown to be most active for the oxidative TCE decomposition, depending significantly on amounts of $CrO_x\;on\;TiO_2$. The use of high $CrO_x$ loadings greater than 10 wt.% caused lower activity in the catalytic TCE oxidation, which is probably due to production of $Cr_2O_3$ crystallites on the surface of $TiO_2$. $CrO_x/TiO_2$-supported $CrO_x$-based bimetallic oxide catalysts were of particular interest in removal efficiency for this TCE oxidation reaction at reaction temperatures above $200^{\circ}C$, compared to that obtained with $CrO_x$-free complex metal oxides and a 10 wt.% $CrO_x/TiO_2$ catalyst. Catalytic activity of 5 wt.% $CrO_x-5$ wt.% $LaO_x$ in the removal reaction was similar to or slightly higher than that acquired for the $CrO_x$-only catalyst. Similar observation was revealed for 5 wt.% $CrO_x$-based bimetallic oxides consisting of either 5 wt.% $MnO_x,\;CoO_x,\;NiO_x\;or\;FeO_x$. These results represent that such $CrO_x$-based bimetallic systems for the catalytic TCE oxidation on significantly minimize the usage of $CrO_x$ that is well known to be one of very toxic heavy metals, and offer a very useful technique to design new type catalysts for reducing chlorinated volatile organic substances.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.27 no.4
• /
• pp.404-412
• /
• 1994

Radium isotopes were measured together with oceanographical parameters in the southern coastal region of the Korean East Sea during the period of September $2{\sim}8$, 1991. In September, there were various water masses vertically distributed in this region due to formation of strongly seasonal thermoclines. These water masses were characterized by activity of radium isotopes as well as water temperature and dissolved oxygen. Among the water masses, Japan Sea Proper Water(JSPW) below $1^{\circ}C$ had the highest Ra-226 activities but the lowest Ra-228 concentrations. However, Tsushima Surface Water (TSW) above $20^{\circ}C$ in water temperature had the highest Ra-228 which decreased sharply with depth. In TSW, Ra-228 activities were in the range of $194{\sim}270$ dpm/kl, which were approximately 10 times higher than JSPW. Activity ratios(A.R's) of Ra-228/Ra-226 were $1.9{\sim}2.6$ for TSW, $0.7{\sim}1.1$ for Tsushima Middle Water(TMW) of $12{\sim}17^{\circ}C\;to\;0.4{\sim}0.7$ for North Korea Cold Water(NKCW) with $1{\sim}7^{\circ}C$ and below 0.2 for JSPW. The Ra-228/Ra-226 ranged from 0.6 to 0.9 in the cold waters of $2{\sim}6^{\circ}C$, which were observed at depth of $65{\sim}120\;m$ in this study area. Radium isotopes provided a useful means of identifying origins of the cold water which occurred annually at intermediate or bottom layers in the southern coastal zone of the Korean East Sea. By plotting radium isotopes against water temperature, it could be observed clearly that the cold waters between $2{\sim}6^{\circ}C$ did not originate from the mixed water of JSPW and TMW but from NKCW.

• Journal of the Korean Arthroscopy Society
• /
• v.17 no.1
• /
• pp.11-17
• /
• 2013

Purpose: The purpose of this study is to evaluate the effect of preservation of the tibial remnant on the synovialization of graft tendon after the reconstruction of anterior cruciate ligament (ACL) based on the second look arthroscopic findings. Materials and Methods: From May 2005 to May 2012, among sixty three patients having ACL reconstruction with the four-strand hamstring using a bioabsorbable cross pin (RigidFix$^{(R)}$) for the femoral tunnel, nineteen patients who had second look arthroscopy were analyzed. We classified them into three groups according to the tibial remnant of the torn ACL for arthroscopic findings. Group 1 had less than 5 mm of a remnant tissue, Group 2 had from 6 mm to 10 mm of it, and Group 3 had more than 11 mm. We estimated the percentage of synovial coverage on the graft tendon during second look arthroscopy. We evaluated Lysholm score and Tegner activity score preoperatively and in the last follow-up. Results: At the time of ACL reconstruction, the mean length of preserved tibial remnant of torn ACL was 2.3 mm in Group 1, 7.4 mm in Group 2, and 13.7 mm in Group 3. In the second look arthroscopy, the average percentage of synovial coverage was 55.4% in Group 1, and 77.9% in Group 2, and 89.7% in Group 3. Lysholm score and Tegner activity score improved from 74.2 and 7.3 preoperatively to 94.1 and 8.5 in the last follow-up. Conclusion: The preservation of tibial remnant of torn ACL influenced the synovial coverage of the graft tendon and the volume of preserved remnant in accordance with the surface of synovial coverage. It would have a good effect on graft healing and preservation of proprioceptive function.