• 한국안전학회지
• /
• 제39권1호
• /
• pp.70-81
• /
• 2024

With heavy rainfall due to extreme weather causing increasing damage, the importance of urban flood forecasting continues to grow. To forecast urban flooding accurately and promptly, a sewer network and surface grid with appropriate detail are necessary. However, for urban areas with complex storm sewer networks and terrain structures, high-resolution grids and detailed networks can significantly prolong the analysis. Therefore, determining an appropriate level of network simplification and a suitable surface grid resolution is essential to secure the golden time for urban flood forecasting. In this study, InfoWorks ICM, a software program capable of 1D-2D coupled simulation, was used to examine urban flood forecasting performance for storm sewer networks with various levels of simplification and different surface grid resolutions. The inundation depth, inundation area, and simulation time were analyzed for each simplification level. Based on the analysis, the simulation time was reduced by up to 65% upon simplifying the storm sewer networks and by up to 96% depending on the surface grid resolution; further, the inundation area was overestimated as the grid resolution increased. This study provides insights into optimizing the simplification level and surface grid resolution for storm sewer networks to ensure efficient and accurate urban flood forecasting.

• 정보처리학회논문지A
• /
• 제11A권5호
• /
• pp.365-372
• /
• 2004

최근 복잡한 3차원 모델의 활용 범위가 확대됨에 따라 메쉬 모델의 간략화에 관한 연구가 활발히 진행되고 있다. 본 논문에서는 기존의 모델 간략화 과정에서 널리 사용되는 모델의 정점에 대한 위치 정보에 근거한 기하 정보 기반의 간략화 방법에 모델의 속성 정보를 동시에 이용한 새로운 간략화 방법을 제시한다. 대부분의 3차원 메쉬 모델의 정보에는 기하 정보뿐만 아니라 모델의 색상, 질감, 그리고 곡률 등과 같은 속성 정보가 포함되며, 기존의 간략화 방법은 통상적으로 기하학적 정보나 속성 정보를 개별적으로 적용하여 메쉬를 간략화 한다. 본 논문에서 제시된 간략화 방법은 모델의 기하학 정보와 속성 정보를 동시에 적용하여 메쉬 간략화를 수행하였다. 특히 본 논문에서는 메쉬의 간략화에 상대적으로 수행 시간과 충실도에 장점을 지닌 이차 오차 척도(quadric error metric)를 확장하여 일반적인 기하학적 정보에 속성 정보를 추가하였다. 따라서, 제안된 메쉬 간략화 방법은 기하 정보기반으로 간략화를 수행하는 이차 오차 척도에 속성 정보가 추가된 간단한 이차식으로 확장하여 표현할 수 있다. 이는 기하 정보만을 이용하였을 때의 이차식의 공간 차수를 m=0으로 두었을 때 추가된 속성 정보의 특성에 따라 차수를 확장 함(m>0)으로서 계산이 가능하다. 실험 결과, 제안된 방법에 의한 모델의 간략화 결과를 원 모델과 비교 시 기하 정보만을 이용한 기존의 간략화 방법의 수행 결과에 비하여 모델의 전체적인 외형 등 특성 정보의 충실도가 높다는 것을 입증할 수 있었다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.1312-1314
• /
• 2004

This paper proposes a new simplification algorithm that simplifies reconstructed polygonal mesh from 3D point set considering an original point set. Previous method computes error using mesh information, but it makes to increase error of difference between an original and a simplified model by reason of implementation of simplification. Proposed method simplifies a reconstructed model using an original point data, we acquire a simplified model similar an original. We show several simplified results to demonstrate the usability of our methods.

• 한국의류학회지
• /
• 제29권9_10호
• /
• pp.1359-1368
• /
• 2005

When we develop the tight-fit 2D pattern from the 3D scan data, segmentation of the 3D scan data into several parts is necessary to make a curved surface into a flat plane. In this study, Garland's method of triangle simplification was adopted to reduce the number of data point without distorting the original shape. The Runge-Kutta method was applied to make triangular patch from the 3D surface in a 2D plane. We also explored the detailed arrangement method of small 2D patches to make a tight-fit pattern for a male body. As results, minimum triangle numbers in the simplification process and efficient arrangement methods of many pieces were suggested for the optimal 2D pattern development. Among four arrangement methods, a block method is faster and easier when dealing with the triangle patches of male's upper body. Anchoring neighboring vertices of blocks to make 2D pattern was observed to be a reasonable arrangement method to get even distribution of stress in a 2D plane.

• 한국멀티미디어학회논문지
• /
• 제5권4호
• /
• pp.458-467
• /
• 2002

대용량의 다각형 표면 데이터를 효과적으로 감소시키는 많은 간략화 알고리즘들이 제안되었다. 이들 간략화 기법들은 정점, 에지, 삼각형 등과 같은 기본적인 간략화 단위에 대해 자신의 붕괴 비용함수를 적용하여 간략화 전후의 에러를 최소화 한다. 기존의 제안된 비용 함수들은 대부분 거리최적화에 기반 한 에러 측정방법을 사용한다. 그러나 기본적으로 스칼라 값인 거리요소 만으로는 현재 메쉬의 지역적인 특징을 정확히 정의하기 어렵다. 따라서 곡률이 심한 지역의 특징 정보를 유지하지 못함으로써 간략화 단계를 높일수록 원래의 세부적인 모양을 잃어버리는 단점이 있다. 본 논문에서는 표면의 방향과 같은 벡터성분을 비용함수의 요소로서 고려한다. 표면의 방향성분은 거리와 같은 스칼라 양에 비의존적이다. 따라서 작은 스칼라 양을 갖는 요소라도 이의 벡터성분의 크기에 따라 보존 여부를 재고할 수 있다. 또한 제안된 비용함수를 바탕으로 하는 반-에지 붕괴에 기반 한 간략화 알고리즘을 개발한다. 이는 객체의 제거 후에 기존 에지의 두 정점 중 하나를 이용하여 새로운 정점을 표현하는 방법으로서 저장공간 상의 이점이 있으며 대용량 표면데이터의 실시간 전송을 요하는 렌더링 시스템에 매우 효과적으로 적용될 수 있다.

• 한국CDE학회논문집
• /
• 제15권3호
• /
• pp.243-252
• /
• 2010

This paper describes a new practical simplification method for feature-based solid models. In this approach, a solid model created using feature modeling operations is first simplified by the suppression of detailed features, and then, if necessary, the model is converted to a surface model to facilitate its modification. Finally, the simplified surface model is delivered to analysis packages. The algorithm was implemented based on CATIA V.5 and applied to mid-surface generation of plastic parts for structural analysis to prove the validity and usefulness.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제24권1호
• /
• pp.23-37
• /
• 2020

The quadratic error metric (QEM) algorithm has been frequently used for simplification of triangular surface models that utilize the vertex-pair algorithm. Simplified models obtained using such algorithms present the advantage of smaller storage capacity requirement compared to the original models. However, a number of cases exist where significant features are lost geometrically, and these features can generally be preserved by utilizing the advantages of the curvature-weighted algorithm. Based on the vertex-based geometric features, a method capable of preserving the geometric features better than the previous algorithms is proposed in this work. To validate the effectiveness of the proposed method, a simplification experiment is conducted using several models. The results of the experiment indicate that the geometrically important features are preserved well when a local feature is present and that the error is similar to those of the previous algorithms when no local features are present.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 추계종합학술대회 논문집(3)
• /
• pp.109-112
• /
• 2000

Many applications in computer graphics require highly detailed complex models. However, the level of detail may vary considerably according to applications. It is often desirable to use approximations in place of excessively detailed models. We have developed a surface simplification algorithm which uses iterative contractions of edges to simplify models and maintains surface error approximations using a quadric metric. In this paper, we present an improved quadric error metric for simplifying meshes. The new metric, based on subdivided edge classification, results in more accurate simplified meshes. We show that a subdivided edge classification captures discontinuities efficiently. The new scheme is demonstrated on a variety of meshes.

• 한국멀티미디어학회논문지
• /
• 제6권4호
• /
• pp.698-706
• /
• 2003

The primary goal of surface approximation is to reduce the degree of deviation of the simplified surface from the original surface. However it is difficult to define the metric that can measure the amount of deviation quantitatively. Many of the existing studies analogize it by using the change of the scalar quantity before and after simplification. This approach makes a lot of sense in the point that the local surfaces with small scalar are relatively less important since they make a low impact on the adjacent areas and thus can be removed from the current surface. However using scalar value alone there can exist many cases that cannot compute the degree of geometric importance of local surface. Especially the perceptual geometric features providing important clues to understand an object, in our observation, are generally constructed with small scalar value. This means that the distinguishing features can be removed in the earlier stage of the simplification process. In this paper, to resolve this problem, we present various factors and their combination as the metric for calculating the deviation error by introducing the orientation of local surfaces. Experimental results indicate that the surface orientation has an important influence on measuring deviation error and the proposed combined error metric works well retaining the relatively high curvature regions on the object's surface constructed with various and complex curvatures.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 추계학술대회 논문집
• /
• pp.153-154
• /
• 2010