• Computers and Concrete
• /
• v.27 no.5
• /
• pp.437-445
• /
• 2021

Retrofitting of structures has gained importance over the recent years. Particularly, Reinforced Cement Concrete (RCC) column strengthening has become a challenge to the structural engineers, owing to the risks and complexities involved in it. There are several methods of RCC column strengthening viz. RCC jacketing, steel jacketing and Fiber Reinforced Polymer (FRP) wrapping etc., FRP wrapping is the most promising alternative when compared to the others. The large research database shows FRP wrapping, through lateral confinement, improves the axial load carrying capacity of the columns under concentric loading. However, its confining efficiency reduces under eccentric loading. Hence a relative newer technique called Near Surface Mounting (NSM), in which Carbon FRP (CFRP) strips are epoxy grouted to the precut grooves in the cover concrete of the columns, has been thrust domain of research. NSM technique strengthens the column nominally under concentric load case while significantly under eccentric case. A novel configuration of NSM in which the vertical NSM (VNSM) strips are being connected by horizontal NSM (HNSM) strips was numerically investigated under both concentric and eccentric loading. It was found that the configuration with 6 HNSM strips performed better under eccentric loading than under concentric loading, while the configuration with 3 HNSM strips performed better under concentric loading than under eccentric loading. Hence an optimum of 4 HNSM strips is recommended as strengthening measure for the given column specifications. It was also found that Aluminum alloy cannot be used instead of CFRP in NSM applications owing to its lower mechanical properties.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.16 no.2
• /
• pp.84-91
• /
• 2007

The radial error motion of a machine tool cutter/spindle system is critical to the dimensional accuracy of the parts to be machined. This paper presents an investigation into spindle run-out effects on cutting mark and surface roughness. We experimented the effects of spindle run-out on surface roughness in flat-end milling by cutting AL 7075 workpiece in various cutting conditions. In order to analyze the effects of run-out on the surface roughness, the spindle's radial error motions was measured by mounting a sphere target onto the spindle as a reference. From the experimental results, it was found that spindle un-out makes a directive effects on surface roughness in flat-end milling.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.3
• /
• pp.2146-2150
• /
• 2015

The surface mount technology is used, as mounting relay using Chip Mounter that is inserted into the junction box, etc. car and small components such as 0402 and 0603 Chip. In this study we developed stick tube for supplying the relay that cause problems as components is heavy and suggested the technology using fiber sensors to eliminate missing insertions or improper insertions because of small components. And we show to result of the experiment how to increased the productivity.

• The Journal of Korean Institute of Information Technology
• /
• v.16 no.11
• /
• pp.51-59
• /
• 2018

The Multi-Mission Unmanned Surface Vehicle(MMUSV), which is manufactured using glass Fiber Reinforced Plastic(FRP) material, is designed to perform a surveillance and reconnaissance on the sea. Various navigation sensors, such as RADAR, RIDAR, camera, are mounted on a mast to perform an autonomous navigation. And a dummy gun is mounted on the deck of the MMUSV for a target tracking and disposal. It is necessary to analyze a strength for structures mounted on the deck because the MMUSV performs missions under a severe sea state. In this paper, a strength analysis of the mast structure is performed on static loads and lateral external loads to verify an adequacy of the designed mast through a series of simulations. Based on the results of captive model tests, a strength analysis for a heave motion of the mast structure is conducted using a simulation tool. Also a simulation and fatigue test for a mounting part between the MMUSV and the dummy gun are performed using a specimen. The simulation and test results are represented that a structure of the mast and mounting part of the dummy gun are appropriately designed.he impact amount are performed through simulation and experiments.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.7 no.4
• /
• pp.117-122
• /
• 1998

Glass fiber epoxy composite material is widely used in the structures of aircrafts, robots and other machines because of their high specific strength, high specific stiffness and high damping. In order for the composite materials to be used in the aircraft structures or machine elements, accurate surfaces for bearing mounting or joint must be provided, which require precise machining. In this paper, the machinability of the glass fiber epoxy composite material was experimentally investigated. The results can be summarized as follows : 1. The entrance of hole is very good manufacturing existing, but exit come to occur sever surface exfoliation. 2. The cutting force in drilling of the glass fiber epoxy composite material is decreased as the drilling speed increased. 3. If the glass fiber epoxy composite material is drilling by the standard twist drill, then the hole recommand cutting condition is spindle speed 400∼600rpm, feed 40∼50mm/min.

• Journal of the Korean Solar Energy Society
• /
• v.31 no.2
• /
• pp.53-62
• /
• 2011

Heliostat in the tower type solar thermal power plant is a sun tracking mirror system to reflect the solar energy to the receiver and the optical performance of it affects to the efficiency of whole power plant most significantly. Thus a proper design of structure of the heliostat reflective surface could be the most important step in the construction of such power plant. The work presented here is a design of structure of optical surface of heliostat, which will be used in 200kW solar thermal power plant. The receiver located at 43(m) high from ground in tower has $2{\times}2$(m) rectangular shape. We first developed the software tool to simulate the energy concentration characteristics of heliostat using the ray tracing technique. Then, the shape of heliostat reflective surface is designed with the consideration of heliostat's energy concentration characteristics, production cost and productivity. The designed heliostat's reflective surface has a structure formed by canting four of $1{\times}1$(m) rectangular flat plate mirror facet and the center of each mirror facet is located on the spherical surface, where the spherical surface is formulated by the mirror facet mounting frame.

• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.1067.1-1067.4
• /
• 2000

During the last three decades power electronics has gone through energetic technical evolution. The technical needs from wide area such as in industrial, commercial, consumer, aerospace and environmental applications have driven the environment favorably for the power electronics. In the future, two extreme technology-expansion trends are expected: one into low power, and the other into very high power. The former is based on the high frequency and the circuit miniature using VLSI circuit and surface mounting aiming for the system-on-chip (SOC) technology. The latter includes the application areas of power utility such as HVDC, FACTS and SVC and large science area of electrophsycal apparatus such as thermonuclear fusion, acclerators, and electric guns. This paper describes the technology status of some major elements which are available today and the key roles of the power electronics from view points of applications. The author would like to take this opportunity to raise discussions about the future technology development trend of power electronics in our country with the fellow power electronics engineers.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.5 no.1
• /
• pp.11-16
• /
• 2005

This paper presents fabrication process and experimental results of two different types of flexible MEMS biosensors based on polymer/metal multilayer processing techniques. One type of a biosensor is a microelectrode array (MEA) for nerve signal monitoring through implanting the MEA into a living body, and another is a tactile sensor capable of being mounted on an arbitrary-shaped surface. The microelectrode array was fabricated and its electrical characteristics have been examined through in vivo and in vitro experiment. For sensitive skin, flexible tactile sensor array was fabricated and its sensitivity has been analyzed. Mechanical flexibility of these biosensors has been achieved by using a polymer, and it is verified by implanting a MEA to an animal and mounting the tactile sensor on an arbitrary-shaped surface.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.27 no.6
• /
• pp.944-953
• /
• 1990

This paper describes design and implementation of a real-time high-precision vision system for an automation of SMT(surface mounting technology ). Also, a part inspection algorithm which calculates the position and direction of SMD(surface mounted device) accurately and performs the ruling using those information are presented, and a parallel processing technique for implementing those algorithms is also described. For a real-time implementation of iage acquisition and processing, several hardware modules, namely, multi-functional A/D-D/A board, frame memory board are developed. Particularly, a PE (processing element) board which employs the DSP56001 DSP (digital signal processor) is developed for the purpose of concurrent processing of part inspection algorithms. A stand-alone vision system is built by integration of the developed hardware modules and related softwares.

• Journal of the Microelectronics and Packaging Society
• /
• v.14 no.1
• /
• pp.1-9
• /
• 2007

OSP(organic solderability preservatives) finish has been considered as a very effective process for substituting the metal surface treatment of Ni/Au finish because of lower cost, interface property and environmental issue of OSP finish. However, the discoloration of OSP layer is formed during assembly process consisting of various steps of temperature. The causes of discoloration and the characterization of solder joint were investigated with a degree of discoloration and the assembly process of OSP finished products, which was also compared statistically with that of conventional Ni/Au finished products. As the results, the solution of process trouble for OSP finished products is able to be offered.