• Geomechanics and Engineering
• /
• v.16 no.6
• /
• pp.635-642
• /
• 2018

Braced excavation systems are commonly required to ensure stability in construction of basements for shopping malls, underground transportation and other habitation facilities. For excavations in deposits of soft clays or residual soils, stiff retaining wall systems such as diaphragm walls are commonly adopted to restrain the ground movements and wall deflections in order to prevent damage to surrounding buildings and utilities. The ground surface settlement behind the excavation is closely associated with the magnitude of basal heave and the wall deflections and is also greatly influenced by the possible groundwater drawdown caused by potential wall leakage, flow from beneath the wall, flow from perched water and along the wall interface or poor panel connections due to the less satisfactory quality. This paper numerically investigates the influences of excavation geometries, the system stiffness, the soil properties and the groundwater drawdown on ground surface settlement and develops a simplified maximum surface settlement Logarithm Regression model for the maximum ground surface settlement estimation. The settlements estimated by this model compare favorably with a number of published and instrumented records.

• Korean Journal of Remote Sensing
• /
• v.37 no.1
• /
• pp.57-67
• /
• 2021

An earthquake occurred on 17 November 2017 in Pohang, South Korea with a strength of 5.4 Mw. This is the second strongest earthquake recorded by local authorities since the equipment was first installed. In order to improve understanding of earthquakes and surface deformation, many studies have been conducted according to these phenomena. In this research, we will estimate the surface deformation using the Okada model equation. The SAR images of three satellites with different wavelengths (ALOS-2, Cosmo SkyMed and Sentinel-1) were used to produce the interferogram pairs. The interferogram is used as a reference for surface deformation changes by using Okada to determine the source of surface deformation that occurs during an earthquake. The Non-linear optimization (Levemberg-Marquadrt algorithm) and Monte Carlo restart was applied to optimize the fault parameter on modeling process. Based on the modeling results of each satellite data, the fault geometry is ~6 km length, ~2 km width and ~5 km depth. The root mean square error values in the surface deformation model results for Sentinel, CSK and ALOS are 0.37 cm, 0.79 cm and 1.47 cm, respectively. Furthermore, the results of this modeling can be used as learning material in understanding about seismic activity to minimize the impacts that arise in the future.

• Korean Journal of Soil Science and Fertilizer
• /
• v.46 no.5
• /
• pp.359-364
• /
• 2013

This study was conducted to develop a model to estimate crop leaf surface temperature. The results were as following; A definition for the daily time based on elapsed time from the midnight (00:00) as "E&E time" with the unit of Kmin. was suggested. The model to estimate the scaled temperature ($T^*e$) of crop leaf surface temperature by scale factor ($T^*$) according to the "E&E time : Kmin."(X) was developed as eq. (1) $T^*e=0.5{\cdot}sin(X+780)+0.5$ (2) $T^*=(Tx-Tn)/(Tm-Tn)$, Tx : Daily leaf temperature, Tm : Daily maximum leaf temperature, Tn : Daily minimum leaf temperature. Relative sensitivity of the measured temperature compared to the estimated temperature of red pepper, soybean and persimmon was 1.078, 1.033 and 0.973, respectively.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.2 no.2
• /
• pp.127-132
• /
• 2002

In this paper, a new method for displaying a surface deformation is proposed using the fuzzy model. In the proposed method, it is enough that only one rule is added to the fuzzy model to display a surface deformation. Furthermore, designer can easily determine which parameters should be used and how much they should be changed in order to alter shapes as they want. The proposed method is, thus, a simple, but effective technique that can also be applied to real time operation. The results of the computer simulation are also given to demonstrate the validity of the proposed algorithm.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.1
• /
• pp.70-76
• /
• 1992

Ignition of hydrogen-air premixed gas in the vicinity of a hot surface has been investigated. Especially multistep reaction model was compared with a single reaction model. It was found that the multistep model with 48 step elementary chemical reactions produced a phenomenologically reasonable trend in ignition delays. The ignition d(2lays increase as the mixture becomes either fuel-rich or fuel-lean with a minimum near the stoichiometric value. The minimum surface temperature has been deduced by extrapolating predicted ignition delays. It was in quite good agreement with the experimental data.

• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.1190-1195
• /
• 2004

In this study, numerical investigation has been performed on the evolution of key-hole geometry during high-energy density laser welding process. Unsteady phase-change heat transfer and fluid flow with the surface tension and recoil pressure are simulated. To model the overheated surface temperature and recoil pressure considering subsonic/sonic vapor flow, the one-dimensional vaporization models proposed by Ganesh and Knight are coupled over liquid-vapor interface. It is shown that the present model predicts well both the vaporization physics and the fluid flow in the thin liquid layer over the other model.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.25 no.3
• /
• pp.51-60
• /
• 2017

Estimation of the taxi-out and taxi-in times of aircraft on a airport surface is one of the essential features of Departure Manager (DMAN). Especially for an airport with multiple runways and large ramp areas, estimation of the taxi-out and taxi-in times are mainly dependent on the taxi routes on airport surface. This paper described the method of automatic extraction of the the taxi routes using the ASDE track data and the Dijkstra algorithm based on the node-link model of a airport surface movements. In addition, we analyzed the ground operation status of Incheon International Airport using the extracted taxi routes.

• Atmosphere
• /
• v.18 no.3
• /
• pp.199-206
• /
• 2008

This study employs a structural time series method in order to model and estimate stochastic trend of surface temperatures of the globe, Northern Hemisphere, and Northeast Asia ($20^{\circ}N{\sim}60^{\circ}N$, $100^{\circ}E{\sim}150^{\circ}E$). For this study the reanalysis data CRUTEM3 (CRU/Hadley Centre gridded land-surface air temperature Version 3) is used. The results show that in these three regions range from $0.268^{\circ}C$ to $0.336^{\circ}C$ in 1997, whereas these vary from $0.423^{\circ}C$ to $0.583^{\circ}C$ in 2007. The annual mean temperature over Northeast Asia has increased by $0.031^{\circ}C$ in 2007 compared to 1997. The climate change in surface temperatures over Northeast Asia is slightly higher than that over the Northern Hemisphere.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.51 no.6
• /
• pp.17-23
• /
• 2009

The Soil and Water Assessment Tool (SWAT) model was used in this study to evaluate the hydrologic impacts by the impervious surface change in the farm region. The model was calibrated and validated by using four years (1999-2002) of measured data for the Gyeongancheon watershed in Korea. The simulation results agreed well with observed values during the calibration and validation periods. Land use scenarios including various changes of the plastic film house area in the farm region were applied to assess their effects on watershed hydrology. The results indicated that the surface direct (5.6%~14.0%) and total runoff (0.8%~1.5%) increased, but the groundwater discharge (10.7%~27.7%) and evapotranspiration (1.5%~3.3%) decreased as the plastic film house area (5.7%~12.4%) increased.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.41 no.6
• /
• pp.518-524
• /
• 2008

A three-dimensional primitive equation model (POM) and the buoy data (2900 N, 13500 E) from the Japan Meteorological Agency (JMA) for 27 typhoons between 1982 and 2000 are used to investigate the sea surface cooling (SSC) that accompanies typhoons in the northwestern Pacific. Observed sea surface temperatures (SSTs) rapidly drop 0.6 to 4.3 C, and SSC continues for several weeks after the passage of a typhoon. The model, which covers most of the northwestern Pacific ($24^{\circ}N$ to $52^{\circ}N$), simulated Typhoon Abby over the tropical Pacific, and successfully reproduces many observed features, including the pattern of SST decrease, inertial oscillations, etc. The model accurately simulated the SSC process, suggesting that the cyclonic eddy with a radius of a few hundred kilometers that trailed Typhoon Abby plays an important role in SSC.