• 제목/요약/키워드: Surface Image Velocimetry

검색결과 137건 처리시간 0.024초

표면영상유속계(SIV)의 야간 하천 유량 측정 정확도 향상을 위한 원적외선 영상 분석 연구 (Analysis of Far Infrared Image for Accuracy Improvement in Night Discharge Measurement using Surface Image Velocimeter)

  • 배인혁;류권규;김서준;윤병만
    • 한국수자원학회:학술대회논문집
    • /
    • 한국수자원학회 2016년도 학술발표회
    • /
    • pp.455-455
    • /
    • 2016
  • 최근 기후변화로 빈번하게 발생하는 국지성 집중호우로 인해 홍수 피해가 증가하고 있으며, 이에 따라 유량 계측 자료의 필요성이 더욱 증대되고 있다. 현재까지 하천의 홍수 유량측정은 대부분 부자법에 의해 수행되어 왔지만, 측정 작업의 위험성이나 측정 정확도에 대해 여러 문제점이 지적되고 있다. 이에 비접촉식 측정 방법으로 안전하고 측정방식이 간편하며 높은 정확도를 갖춘 표면영상유속측정법(Surface Image Velocimetry, SIV)에 대한 연구가 활발하게 진행되고 있다. 다만 표면영상유속측정법의 경우 질 좋은 영상 촬영을 위해 밝은 빛이 필요하고, 일반적으로 매우 작은 규모의 하천을 제외하고는 영상 획득이 어렵다는 한계가 있다. 이와 같은 문제들을 해결하기 위해 최근 류권규 등(2015)은 영상 획득 장비로 원적외선 카메라의 적용성을 검토한 바 있다. 원적외선 카메라의 경우 별도의 조명을 필요로 하지 않기 때문에 주야간 구분 없이 사용 가능하다는 장점이 있으며 실제 하천에서 홍수와 함께 발생하는 안개의 영향 또한 받지 않아 고정식으로 설치하여 하천 유량측정 시스템을 구성하는 좋은 대안이 될 수 있음을 강조하였다. 다만, 원적외선 카메라는 야간에 적용시 주간과 비교하여 수표면의 움직임이 느리게 분석되는 경향이 있다고 하였다. 실험 결과를 보면, 소형 프로펠러 유속계로 측정한 수표면의 유속값에 비교하여 일반 캠코더 영상으로 산정한 유속 산정 결과의 상대오차는 최대 -10%인 반면, 원적외선 카메라 영상으로 산정한 유속 산정 결과의 오차는 -9%에서 -19%(주간), -10% 에서 -23%까지의 오차 범위를 나타내는 등 일반 캠코더에 비해 원적외선 카메라의 정확도가 다소 떨어지는 결과를 나타냈으며, 이러한 문제를 해결하기 위해서는 원적외선 영상의 명암값 분포 차이를 해결하기 위해 영상 처리 기법에 대한 추가적인 연구가 필요할 것이라고 하였다. 이에 본 연구에서는 원적외선 영상에 대한 다양한 영상 개선을 통해 표면영상유속계의 유속 측정 정확도를 높이고자 하였다. 이를 위해 우선, 적정 해상도와 시간간격을 제시하였으며, 영상의 색 보정과 영상 강화 등의 영상 개선을 통해 원적외선 영상을 이용한 유속 산정 정확도를 향상하였고, 마지막으로 다양한 야간 하천 흐름 조건에 적용하여 원적외선 영상을 활용한 표면영상유속계의 유속 측정 정확도를 높이고자 하였다.

  • PDF

레이더 자료의 강우보정 및 Vflo를 활용한 도심하천의 홍수량 산정 (Rainfall Correction of Radar Image Data and Estimation Runoff of Urban Stream using Vflo)

  • 강보성;양성기;김용석
    • 한국환경과학회지
    • /
    • 제26권4호
    • /
    • pp.411-420
    • /
    • 2017
  • This research aims at comparing the accuracy of flood discharge estimation. For this, we focused on the Oedo watershed of Jeju Island and compared flood discharge by analyzing the values as follows: (1) the concentration of the lumped model (HEC-HMS) and distributed model (Vflo), and (2) the in-situ data using Fixed Surface Image Velocimetry (FSIV). The flood discharge estimation from the HEC-HMS model is slightly larger than the Vflo model results. This result shows that the estimations of the HEC-HMS are larger than the flood discharge data by 4.43 to 36.24% and that of the Vflo are larger by 8.49 to 11%. In terms of the error analysis at the peak discharge occurrence time of each mapping, HEC-HMS is one hour later than the measured data, but Vflo is almost the same as the measured data.

사각탱크 내부의 기포구동유동에 대한 동특성 연구 (Dynamic Analysis of Bubble-Driven Liquid Flows in a Rectangular Tank)

  • 김상문;이승재;김현동;김종욱;김경천
    • 한국가시화정보학회지
    • /
    • 제8권1호
    • /
    • pp.31-38
    • /
    • 2010
  • An experimental study to evaluate dynamic structures of flow and turbulence characteristics in bubble-driven liquid flow in a rectangular tank with a varying flow rate of compressed air is conducted. Liquid flow fields are measured by time-resolved particle image velocimetry (PIV) with fluorescent tracer particles to eliminate diffused reflections, and by an image intensifier to acquire enhanced clean particle images. Instantaneous vector fields are investigated by using the two frame cross-correlation function and bad vectors are eliminated by magnitude difference technique. By proper orthogonal decomposition (POD) analysis, the energy distributions of spatial and temporal modes are acquired. When Reynolds number increases, bubble-induced turbulent motion becomes dominant rather than the recirculating flow near the side wall. The total kinetic energy transferred to the liquid from the rising bubbles shows a nonlinear relation regarding the energy input because of the interaction between bubbles and free surface.

Flow structures around a three-dimensional rectangular body with ground effect

  • Gurlek, Cahit;Sahin, Besir;Ozalp, Coskun;Akilli, Huseyin
    • Wind and Structures
    • /
    • 제11권5호
    • /
    • pp.345-359
    • /
    • 2008
  • An experimental investigation of the flow over the rectangular body located in close proximity to a ground board was reported using the particle image velocimetry (PIV) technique. The present experiments were conducted in a closed-loop open surface water channel with the Reynolds number, $Re_H=1.2{\times}10^4$ based on the model height. In addition to the PIV measurements, flow visualization studies were also carried out. The PIV technique provided instantaneous and time-averaged velocity vectors map, vorticity contours, streamline topology and turbulent quantities at various locations in the near wake. In the vertical symmetry plane, the upperbody flow is separated from the sharp top leading edge of the model and formed a large reverse flow region on the upper surface of the model. The flow structure downstream of the model has asymmetric double vortices. In the horizontal symmetry plane, identical separated flow regions occur on both vertical side walls and a pair of primary recirculatory bubbles dominates the wake region.

관통 손상 구멍으로부터의 제트-교차 흐름의 유동장 구조 (The Flow Field Structure of Jet-in-Cross Flow through the Perforated Damage Hole)

  • 이기영
    • 한국군사과학기술학회지
    • /
    • 제17권4호
    • /
    • pp.551-559
    • /
    • 2014
  • The influence of the battle damage hole on the velocity and vorticity flow field have been studied by using particle image velocimetry. Time averaged velocity and vorticity vector fields in the vicinity of jet are presented. The perforated damage hole on a wing created from a hit by anti-air artillery was modeled as a 10% chord size hole which positioned at quarter chord. At low angles of attack, the vorticity in the forward side of the jet is cancelled due to mixing with the wing surface boundary layer. Stretching of vorticity in the backside of the jet generates a semi-cylindrical vortical layer that enclosing a domain with slow moving reverse flow. Conversely, at higher the angles of attack, the jet vorticity advected away from the wing surface and remains mostly confined to the jet. The mean flow behind the jet has a wake-like structure.

해안선에 평행한 단일 잠제 후면 연안 흐름패턴 관측 수리실험 (Laboratory Observations of Nearshore Flow Patterns Behind a Single Shore-Parallel Submerged Breakwater)

  • 최준우;노민
    • 한국해안·해양공학회논문집
    • /
    • 제29권3호
    • /
    • pp.139-146
    • /
    • 2017
  • 해안선 변동을 제어하기 위해 설치되는 잠제의 효과를 이해하기 위해 해안선과 평행한 단일 잠제 주변 연안의 흐름변화 특성을 수리실험을 통해 연구하였다. 잠제와 입사파 파라미터에 따른 잠제 후면의 흐름패턴을 관측하기 위해 LSPIV(Large-Scale Particle Image Velocimetry) 이미지 분석 기법을 적용하였고, 잠제 주변의 역학적 특성을 파악하기 위해 평균수면 및 파고분포를 관측하였다. 수리실험을 통해 흐름패턴은 잠제에 의한 파고(파랑응력) 분포변화와 그에 따라 발달하는 잠제 후면과 측면 쇄파유도류 및 평균수면상승효과의 상호작용에 의해 변화됨을 알 수 있었다. 잠제 주변의 분기 또는 수렴하는 흐름패턴에 따라 각각 해안선 변동을 침식 또는 퇴적반응으로 구분하는 Ranasinghe et al.(2010)의 경험식과 수리실험 결과를 비교하여, 전반적으로 경험식에 부합하는 흐름패턴을 확인할 수 있었다. 그러나 일부 실험결과에서 기존의 경험식을 적용하여 구분하기 어려운 침식과 퇴적이 혼재된 반응을 유도하는 흐름패턴도 관찰할 수 있었다.

직사각형 형상의 표면조도 변화에 의한 난류변동분 해석 (Analysis of Turbulent Velocity Fluctuations of Rectangular Shape of the Surface Roughness Change)

  • 오대균;오우준;김도정;이경우
    • 해양환경안전학회지
    • /
    • 제17권2호
    • /
    • pp.167-172
    • /
    • 2011
  • 표면조도에 의해 발생하는 난류유동은 공학적, 물리적 분야에서 매우 중요하게 다루어지고 있다. 표면조도는 선박에서도 설계, 용접, 도장 등 각각의 단계에서 다양한 측면으로 고려되어야 할 중요한 요소이다. 본 연구는 표면조도 형상을 일반화하여 PIV기법을 적용하여 수조실험을 수행하였다. 표면조도 조건은 거칠기 형상의 간격에 대해 변화를 주었으며, 실험유속은 Re = $1.1{\times}10^4$, Re = $2.0{\times}10^4$, Re = $2.9{\times}10^4$ 에서 시간평균에 대한 난류강도를 알아보았다. 거칠기 계수 증가에 따라 표면 거칠기 형상 근처에서 발생한 난류성분에 의해 난류강도는 강하게 나타났으며, 자유흐름 영역으로 갈수록 유동 방향의 변동이 전혀 없는 흐름이 나타났다. 실험유속 조건 변화에 대한 난류강도의 편차는 크게 영향을 받지 않았다.

딤플을 적용한 평판에 대한 항력 감소 연구 (Study on the Drag Reduction of 2-D Dimpled-Plates)

  • 백부근;편영식;김준형;김경열;김기섭;정철민;김찬기
    • 대한조선학회논문집
    • /
    • 제49권4호
    • /
    • pp.333-339
    • /
    • 2012
  • The main objective of the present study is to investigate the roles of the micro-dimpled surface on the drag reduction. To investigate the effectiveness of the micro-dimpled surface, the flat plates are prepared. The micro-size dimples are directly carved on the metal surface by ultrasonic nano-crystal surface modification (UNSM) method. Momentum of the main flow is increased by the dimple patterns within the turbulent boundary layer (TBL), however, there is no significant change in the turbulence intensity in the TBL. The influence of dimple patterns is examined through the flow field survey near the flat plate trailing edge in terms of the profile drag. The wake flow velocities in the flat plate are measured by PIV technique. The maximum drag reduction rate is 4.6% at the Reynolds number of $10^6{\sim}10^7$. The dimples tend to increase the drag reduction rate consistently even at high Reynolds number range.

몰수실린더에 의하여 생성되는 쇄파주위 점성유동의 고찰 (제1부 : 파형 및 압력분포) (On the Viscous Flow Around Breaking Waves Generated by a Submerged Cylinder(Part 1 : Wave Pattern and Surface Pressure))

  • 현범수;신용현
    • 대한조선학회논문집
    • /
    • 제37권1호
    • /
    • pp.82-90
    • /
    • 2000
  • 수면하에서 정속으로 움직이는 원형실린더에 의하여 생성되는 정상파 및 쇄파에 대한 실험적 연구를 회류수조에서 수행하였다. 실린더의 몰수깊이에 따른 자유표면 형상, 물체표면 압력분포를 계측하였고 물체후류에서의 속도, 전수두손실 분포와 난류강도를 계측하였다. 총3부로 나누어 발표할 본 연구의 제1부는 실험장치와 몰수깊이에 따른 파형과 압력분포 변화를 소개하고 있다. 이 내용은 전통적인 선박유체역학 분야 종사자들에게 유익한 실험자료를 제공하는데 목적이 있다. 뒤이어 발표될 제2부는 쇄파주의 순간 유동장의 정량적 가시화를 통한 실린더와 쇄파간의 상호작용을 해석하고자 한다.

  • PDF

자유수면에 접한 원형실린더 주위의 유동계측 (Flow Characteristics around a Circular Cylinder according as the Depth from Free Surface)

  • 손창배;김옥석;오우준;이창우;이경우
    • 한국항해항만학회:학술대회논문집
    • /
    • 한국항해항만학회 2010년도 춘계학술대회
    • /
    • pp.389-391
    • /
    • 2010
  • 자유수면에 접한 원형실린더는 후류유동에 변화를 초래한다. 이를 위해 희류수조의 수면하 깊이를 변화시키며 $Re=1.0\times10^3$에서 순간유동장을 계측하여 실험을 통하여 그 영향을 조사하였다. 계측된 결과는 상호상관 PIV기법을 이용하여 원형실린더의 2차원 유동특성을 알아보기 위하여 상호 비교하였다. 자유수면에 의한 원형실린더 주변유동은 후류에 영향을 미친다. 특히 d=l.0D의 경우에 있어서 경계층은 전체 영역에 걸쳐 분포하였다. 원형실린더의 박리점과 경계층은 수심의 깊이에 따라 제어가 가능하였다.

  • PDF