• Title/Summary/Keyword: Surface Height

Search Result 2,490, Processing Time 0.034 seconds

An Examination of the Fire Behavior of Pinus densiflora Fuel Beds with Thinning Intensity (간벌강도별 지표연료량에 따른 소나무 화염특성 분석)

  • Ye-Eun Lee;Jae Hak Song;Sangjun Im;Kyung Nam Kwon;Chun Geun Kwon
    • Journal of Korean Society of Forest Science
    • /
    • v.113 no.3
    • /
    • pp.308-318
    • /
    • 2024
  • Forest fuel management plays a crucial role in the proper management of frequent and large-scale forest fires worldwide. This study evaluated the impact of fuel management on reducing forest fire risk by through surface fire behavior through laboratory experiments and simulations using the Wildland Fire Dynamics Simulator. For Pinus densiflora litter, fuel conditions were established based on field surveys in Goseong-gun, Gangwon-do, focusing on control, 20% thinning, and 40% thinning sites. Results indicated that visible flame height, vertical temperature distribution, and maximum heat release rate tended to decrease with higher thinning intensity, implying a lower forest fire risk. Overall, the WFDS simulations produced higher values compared to the laboratory experiments, but the trends were similar. The results of this study can serve as fundamental data for evaluating forest fire risk based on thinning intensity and establishing a research foundation for fire prevention.

A Simple Method Using a Topography Correction Coefficient for Estimating Daily Distribution of Solar Irradiance in Complex Terrain (지형보정계수를 이용한 복잡지형의 일 적산일사량 분포 추정)

  • Yun, Jin-I.
    • Korean Journal of Agricultural and Forest Meteorology
    • /
    • v.11 no.1
    • /
    • pp.13-18
    • /
    • 2009
  • Accurate solar radiation data are critical to evaluate major physiological responses of plants. For most upland crops and orchard plants growing in complex terrain, however, it is not easy for farmers or agronomists to access solar irradiance data. Here we suggest a simple method using a sun-slope geometry based topographical coefficient to estimate daily solar irradiance on any sloping surfaces from global solar radiation measured at a nearby weather station. An hourly solar irradiance ratio ($W_i$) between sloping and horizontal surface is defined as multiplication of the relative solar intensity($k_i$) and the slope irradiance ratio($r_i$) at an hourly interval. The $k_i$ is the ratio of hourly solar radiation to the 24 hour cumulative radiation on a horizontal surface under clear sky conditions. The $r_i$ is the ratio of clear sky radiation on a given slope to that on a horizontal reference. Daily coefficient for slope correction is simply the sum of $W_i$ on each date. We calculated daily solar irradiance at 8 side slope locations circumventing a cone-shaped parasitic volcano(c.a., 570m diameter for the bottom circle and 90m bottom-to-top height) by multiplying these coefficients to the global solar radiation measured horizontally. Comparison with the measured slope irradiance from April 2007 to March 2008 resulted in the root mean square error(RMSE) of $1.61MJ\;m^{-2}$ for the whole period but the RMSE for April to October(i.e., major cropping season in Korea) was much lower and satisfied the 5% error tolerance for radiation measurement. The RMSE was smallest in October regardless of slope aspect, and the aspect dependent variation of RMSE was greatest in November. Annual variation in RMSE was greatest on north and south facing slopes, followed by southwest, southeast, and northwest slopes in decreasing order. Once the coefficients are prepared, global solar radiation data from nearby stations can be easily converted to the solar irradiance map at landscape scales with the operational reliability in cropping season.

A Study on the Traditional Costumes and Tattoo of the Maori (마오리族 傳統 服飾과 文身 考察)

  • 황춘섭;정현주
    • The Research Journal of the Costume Culture
    • /
    • v.3 no.2
    • /
    • pp.241-260
    • /
    • 1995
  • The Maori's traditional clothing materials, basic forms of dress, and the pattern and technique of tatoo were examined in the present study in order to deepen the appreciation of the cultural heritage of the Maori. The research method employed was the analysis of written materials. And a fild-trip was also made for the study. The study was limitted to the traditional culture of body adornment of the Maori including the clothing which is preserved and practicing by them at the present day, and the origin and the process of the historical development of those are not included in the scope of the present study. Followings are the results of the study: (1) By far the most widely used fiber for Maori clothing is abtained from what is commonly called New Zealand Flax. The fiber of kiekie(Freycinetia baueriana) and cabbage trees(Cordyline spp.) may also be used. The strong, long-lasting fiber of toi(cordyline indivisa) is used for a prestige warrior's cloak. Flat strips of ti kauka(Cordyline australi) are also used as thatch on rain cloaks. (2) Regardless of technique used, Maori weaving is always worked horizontally from left to right. Traditionally the work was suspended between two upright turuturu or weaving sticks. As the work progressed a second pair of uprights was used to keep the work off the ground. These uprights were moved forward as required. Because the weaver sat on the ground, the working edge was kept at a height that was comfortable to reach. No weaving tools are used, the wefts(aho) being manipulated by the fingers. The two main Maori weaving techniques are whatu aho patahi(single-pair twining) and whatu aho rua(double-pair twining). (3) The Maori wore two basic garments - a waist met and a cloak. The cloth of commoners were of plain manufacture, while those of people of rank were superior, sometimes being decorated with feather or dyed tags and decorated borders. Children ran more-or-less naked until puberty, being dressed only for special events. Some working dress consisted of nothing more than belts with leaves thrust under them. Chiefs and commoners usually went barefoot, using rough sandals on journeys over rough country (4) The adornment of men and women of rank was an important matter of tribal concern as it was in chiefly persons that prestige of the group was centred, The durable items of Maori persons adornment were either worn or carried. Ornaments of various kinds were draped about the neck or suspended from pierced earlobes. Combs decorated the head. Personal decorations not only enhanced the appearance of men and women, but many had protective magical function. The most evident personal ornament was the hei-tiki made of jade or other material. Maori weapons were treasured by their owners. They served on bottle and were also personal regalia. A man of rank was not fully dressed without a weapon in hand. Also weapons were essential to effective oratory. (5) No man or woman of rank went without some tattoo adornment except in extremely rare instances when a person was too sacred to have any blood shed. The untattooed were marked as beeing commoners of no social standing. This indelible mark of rank was begun, with appropriate rite and ritual, at puberty. And tattoo marked the person as being of a marriageable age. Maori tattoo was unlike most traditional tattoo in that its main line were 'engraved' on the face with deep cuts made by miniature bone chisels. The fill-in areas were not tattooed with cuts but with the multiple pricks of small bone 'combs' that only lightly penetrated the skin surface. The instrument of tattoo consisted of small pots of pumice or wood into which was placed a wetted black pigment made from burnt kauri gum, burnt vegetable caterpillars or other sooty materials. A bird bone chisel or comb set at right angles on a short wooden handle was dipped into the gigment, that a rod or stick was used to tap head of this miniature adze, causing penetration of the skin surface. Black pigment lodged under the skin took on a bluish tinge. A full made facial tattoo consisted of major spirals with smaller spirals on each side of the nose and sweeping curved lines radiating out from between the brows over the forehead and from the nose to the chin. The major patterns were cut deep, while the secondary koru patterns were lightly pricked into the skin.

  • PDF

A Polarization-based Frequency Scanning Interferometer and the Measurement Processing Acceleration based on Parallel Programing (편광 기반 주파수 스캐닝 간섭 시스템 및 병렬 프로그래밍 기반 측정 고속화)

  • Lee, Seung Hyun;Kim, Min Young
    • Journal of the Institute of Electronics and Information Engineers
    • /
    • v.50 no.8
    • /
    • pp.253-263
    • /
    • 2013
  • Frequency Scanning Interferometry(FSI) system, one of the most promising optical surface measurement techniques, generally results in superior optical performance comparing with other 3-dimensional measuring methods as its hardware structure is fixed in operation and only the light frequency is scanned in a specific spectral band without vertical scanning of the target surface or the objective lens. FSI system collects a set of images of interference fringe by changing the frequency of light source. After that, it transforms intensity data of acquired image into frequency information, and calculates the height profile of target objects with the help of frequency analysis based on Fast Fourier Transform(FFT). However, it still suffers from optical noise on target surfaces and relatively long processing time due to the number of images acquired in frequency scanning phase. 1) a Polarization-based Frequency Scanning Interferometry(PFSI) is proposed for optical noise robustness. It consists of tunable laser for light source, ${\lambda}/4$ plate in front of reference mirror, ${\lambda}/4$ plate in front of target object, polarizing beam splitter, polarizer in front of image sensor, polarizer in front of the fiber coupled light source, ${\lambda}/2$ plate between PBS and polarizer of the light source. Using the proposed system, we can solve the problem of fringe image with low contrast by using polarization technique. Also, we can control light distribution of object beam and reference beam. 2) the signal processing acceleration method is proposed for PFSI, based on parallel processing architecture, which consists of parallel processing hardware and software such as Graphic Processing Unit(GPU) and Compute Unified Device Architecture(CUDA). As a result, the processing time reaches into tact time level of real-time processing. Finally, the proposed system is evaluated in terms of accuracy and processing speed through a series of experiment and the obtained results show the effectiveness of the proposed system and method.

Effects of Oxygen Transfer Rate of a Polystyrene Foam Bead Media in a Packed Column Aerator (Packed Column 에어레이터에서 매질로 이용한 발포스티로폼 입자의 산소 전달 효과)

  • 박정환;김유희;조재윤
    • Journal of Aquaculture
    • /
    • v.13 no.3
    • /
    • pp.267-275
    • /
    • 2000
  • To evaluate the characteristics and efficiency of oxygen transfer rate of a polystyrene foam bead as media in a packed column aerator was tested. This media has more surface area and cheaper than other ordinary plastic media. The polystyrene foam media was a sphere-shaped bead with 2.5 mm in diameter and specific surface area was 1,350 $m^2$/$m^3$. Oxygen transfer rate and standard aeration efficiency were tested under different hydraulic loading rates, depths of the media and temperatures. Experiment 1 was performed using a small packed column aerator with 10 cm in diameter and 1 m in length. The aerator filled with 0, 4.5, 9.0 and 18.0 cm of the media was tested under hydraulic loading rates of 2.0, 4.0 and 5.6 $m^3$/$m^2$/min at temperatures of 20, 25 and 3$0^{\circ}C$, respectively. In this experiment, standard oxygen transfer rate (SOTR) increased with the hydraulic loading rate and depth of the media increased. The maximum SOTR was reached at 5.6 $m^3$/$m^2$/min of hydraulic loading rate with 9 cm in depth of the media. However, standard aeration efficiency (SAE) decreased with the hydraulic loading rate increased because electricity consumed by pump increased as hydraulic loading rate increased. The highest SAE was reached at hydraulic loading rate of 2.0 $m^3$/$m^2$/min with 9.0 cm in depth of the media. Therefore, the highest SOTR and SAE were achieved at 9.0 cm in depth of the media regardless of the hydraulic loading rate. The maximum SAE was about 1.8 kg $O_2$/kW-hr with the hydraulic loading .ate of $m^3$/$m^2$/min at temperature of 20 $^{\circ}C$.Experiment 2 was performed using a larger aerator, 20 cm in diameter with 2 m in height. The aerator filled with 0, 9, 18, 27 and 36 cm of the media was operated under hydraulic loading rate of 2.0, 4.0 and 5.6 $m^3$/$m^2$/min at temperature of 27 $^{\circ}C$. The SAE reached to the highest efficiency (1.9 kg $O_2$/kW-hr) at 2.0 $m^3$/$m^2$/min of hydraulic loading rate and 36 cm in depth of the media. According to the above results, the polystyrene foam bead as a media in a packed column aerator was effective to increase oxygen transfer rate.

  • PDF

Rice Growth and Yield at Different Cultural Methods under No-tillage Condition (벼 무경운 재배시 재배양식에 따른 생육 및 수량)

  • 박홍규;김상수;백남현;석순종;박건호;이선용
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.41 no.4
    • /
    • pp.420-428
    • /
    • 1996
  • This study was conducted to investigate the response of growth and yield of rice under five different cultural methods, machine transplanting(MTNT), puddled drill seeding (PDSNT), drill seeding on soil surface (DSNT) , broadcasting on soil surface (BSNT) under no-tillage paddy condition and conventional machine transplanting(MTT) in Jeonbuk series(siltyloam soil) from 1993 to 1995. Soil hardness was higher in no-tillage soil and increased with highly difference between tillaged and no-tillage soil with deeper soil depth. Bulk density was heavier in no-tillage soil and porosity was higher in tilled soil than that of the control. The rate of effective tiller was higher in MTT, following MTNT, PDSNT, DSNT and BSNT. Weed occurrence was more serious in no-tillage soil, than that of tillaged soil. The rate of lower internode length was lower in DSNT and BSNT and was similar with MTT in PDSNT and MTNT. Height of center gravity in terms of lodging tolerance was lower in direct seeding than in machine transplanting. Depth of buried culm was shorter in no-tillage soil, especially in DSNT and BSNT. Total amount of root was higher in MTT, following MTNT, PDSNT, BSNT and BSNT and the distribution rate of root in shallower soil layer was higher in no-tillage soil, especially in BSNT and DSNT. Field lodging occured highly in BSNT, following DSNA, PDSNT and MTNT with high lodging scale in DSNT and BSNT. Panicle number per unit land square meter was the highest in MTT and the least in BSNT. Ripened grain ratio was low in BSNT and DSNT due to heavy lodging. Yield of milled rice was 93% in PDSNT, 87% in DSNT, 81% in BSNT and 96% in MTNT, compared with 534kg /10a in MTT.

  • PDF

Studies on the Improvement of Mountainous Pasture I. Effect of the various litters on germination , establishment , and herbage production of oversown grasses (산지초지 개량에 관한 연구 I. 낙엽퇴적물이 겉뿌린 목초의 발아 , 정착 및 수량에 미치는 영향)

  • 이인덕
    • Journal of The Korean Society of Grassland and Forage Science
    • /
    • v.4 no.1
    • /
    • pp.35-40
    • /
    • 1983
  • This study was conducted to investigate the effect of some kinds of tree litters covered the soil surface on the germination, establishment, sward composition, and herbage production of the grasses sown by the oversowing method. The litters were leaves of Pinus rigida Miller, Quercus variabilis Blume, Larix leptolepis Gord, and Alnus hirsuta Rupr. The results obtained were as follows; 1. In the Petri dish, germination was affected by grass species and kinds of litters, especially the percolate from Pinus litter seriously suppressed the early germination of small size seeds such as ladino clover and timothy. 2. In the pot, establishment was slightly suppressed in ladino and timothy by the percolate from Pinus litter, while in others it was decreased relatively. 3. Among the 6 species investigated, the small size seeds of ladino clover and timothy and the large size seeds of red clover, they could be early put into the litter spaces and established well. 4. In Larix litter, the establishment percentage of all species were decreased seriously owing to low moisture retention capacity. 5. Grass height and root length were different in kinds of litters and species. 6. The percentages of establishment on each surface treatments of burning, treading, raking, and the control under Quercus tree were 36, 46, 37, and 31%, respectively. 7. The sward percentage of oversown grasses and legumes was 57.8% in burning, 70.9% in treading, 59.6% in raking, and 54.0% in the control. 8. Treading treatment was most effective to destroy existing vegetation and improve soil-seed contact when oversowing and showed the best result. 9. Yield of dry matter per unit area in treading treatment was higher (p<0.05) than those of the other treatments. The above experimental results suggest the importance of direct oversowing on the litters in the mountainous land and forest land.

  • PDF

Performance Evaluation of Hydrocyclone Filter for Treatment of Micro Particles in Storm Runoff (Hydrocyclone Filter 장치를 이용한 강우유출수내 미세입자 제거특성 분석)

  • Lee, Jun-Ho;Bang, Ki-Woong;Hong, Sung-Chul
    • Journal of Korean Society of Environmental Engineers
    • /
    • v.31 no.11
    • /
    • pp.1007-1018
    • /
    • 2009
  • Hydrocyclone is widely used in industry, because of its simplicity in design, high capacity, low maintenance and operational cost. The separation action of a hydrocyclone treating particulate slurry is a consequence of the swirling flow that produces a centrifugal force on the fluid and suspended particles. In spite of hydrocyclone have many advantage, the application for treatment of urban stormwater case study were rare. We conducted a laboratory scale study on treatable potential of micro particles using hydrocyclone filter (HCF) that was a combined modified hydrocyclone with perlite filter cartridge. Since it was not easy to use actual storm water in the scaled-down hydraulic model investigations, it was necessary to reproduce ranges of particles sizes with synthetic materials. The synthesized storm runoff was made with water and addition of particles; ion exchange resin, road sediment, commercial area manhole sediment, and silica gel particles. Experimental studies have been carried out about the particle separation performance of HCF-open system and HCF-closed system. The principal structural differences of these HCFs are underflow zone structure and vortex finder. HCF was made of acryl resin with 120 mm of diameter hydrocyclone and 250 mm of diameter filter chamber and overall height of 800 mm. To determine the removal efficiency for various influent concentrations of suspended solids (SS) and chemical oxygen demand (COD), tests were performed with different operational conditions. The operated maximum of surface loading rate was about 700 $m^3/m^2$/day for HCF-open system, and 1,200 $m^3/m^2$/day for HCF-closed system. It was found that particle removal efficiency for the HCF-closed system is better than the HCF-open system under same surface loading rate. Results showed that SS removal efficiency with the HCF-closed system improved by about 8~20% compared with HCF-open system. The average removal efficiency difference for HCF-closed system between measurement and CFD particle tracking simulation was about 4%.

Assessment of the Breast-Firmming Effects of a Cosmetic Preparation with Moir$\acute{e}$ Tophography in Combination with 2D and 3D Digital Image Analyses (2D 및 3D 디지털 이미지 분석과 함께 Moir$\acute{e}$ Tophography 분석을 이용한 화장품의 가슴 탄력개선 효과 평가)

  • Seo, Young Kyoung;Yoo, Mi Ae;Ryu, Ja Hyun;Kim, So Jeong;Cho, Seong A;Nam, Gae Won;Cho, Jun-Cheol;Boo, Yong Chool;Koh, Jae-Sook
    • Journal of the Society of Cosmetic Scientists of Korea
    • /
    • v.38 no.4
    • /
    • pp.289-296
    • /
    • 2012
  • Cosmetic products which might augment the breast have attracted an attention and objective methods for the evaluation of such products are in high demand. This study was conducted to establish a method for assessing the breast-firmming effects of cosmetics. This study included a total of 30 healthy Korean females aged 20-50 years. A cosmetic product was applied by massaging it onto the breast twice a day for 8 weeks. Measurement of breast girth with a tape ruler, 2D and 3D digital image analyses, and Moir$\acute{e}$ topographic analysis were performed before and following the treatment. The application of a cosmetic onto the breast significantly increased breast girth at 2, 4 and 8 weeks without a significant change in underbreast girth, implicating the breast might be augmented. The 2D image analysis indicated that the arc length of the breast which represents the surface distance from the nipple to the periphery of the under-breast was significantly increased at 2, 4 and 8 weeks. The height of the breast which represents the perpendicular distance from the nipple to the periphery of the under-breast was also increased significantly at 4 and 8 weeks. The 3D image analysis of body surface also demonstrated a significant increase of breast volume at 2, 4 and 8 weeks. Moir$\acute{e}$ topographic analysis indicated that breast sagging was significantly reduced at 2, 4 and 8 weeks. The results of this study suggest that Moir$\acute{e}$ topography in combination with 2D and 3D digital image analyses may be useful for evaluating the breast-augmenting effects of cosmetics.

Actual Evapotranspiration of Sesame Crop Cultured With and Without Transparent Plastic Film Mulch (투명(透明) 프라스틱 필름 피복(被覆)에 따른 참깨의 실증발산량(實蒸發散量) 변화(變化))

  • Oh, Dong-Shin;Kwon, Yong-Woong;Im, Jung-Nam;Ryu, Kwan-Shig
    • Korean Journal of Soil Science and Fertilizer
    • /
    • v.29 no.1
    • /
    • pp.34-43
    • /
    • 1996
  • Determining the actual evapotranspiration(ETa) of a crop, and appropriate water management of the crop based on the ETa are very important For increasing the yield. The present study aimed at determining ETa and crop coefficient of sesame growing under different climatic conditions with the transparent thin polyethylene film mulch(0.03 mm thick) and without this mulch. Bottomless cylindrical lysimeters(105cm in diameter, 120cm in height, protruded 20 cm above the soil surface) were installed on the field of sandy loam "Bonyang series" soil with a moderate drainage. The determination of ETa was performed by measuring each component of a model equation, $ETa=(R+I)-\{Ro+(D1+D2)\}+C{\pm}{\Delta}S$. Sesame, cv. "Ansan" was sown in two rows with the spacing of $50{\times}15cm$ on May 10 in 1991 and 1992. The mulching covers 80% of the soil surface. Sesame consumed the water of 139.0 mm(1.53 mm/day) and 171.2 mm(1.59 mm/day) in ETa without the film mulch, but that of 132.6 mm(1.46 mm/day) and 199.8 mm(1.85 mm/day) with its mulching through both years of 1991 and 1992, respectively. The ETa's accounted for 52 and 69% of the potential evapotranspiration(ETp) in the mulched crop, and 54 and 59% of ETp in the non-mulched crop 1991 through 1992, respectively. Its ETa's were much more and their gap between the mulching and non-mulching treatment was larger in 1992 than in 1991 as a result of the better climatic condition of 1992.

  • PDF