• 제목/요약/키워드: Support tube

검색결과 287건 처리시간 0.025초

탄소 담지체(CNTs)에 따른 직접메탄올연료전지용 Pt/Au/TiO2 촉매 제조와 평가 (Effect of Carbon Support (CNTs) on Pt/Au/TiO2 Catalyst Preparation and Characterization for Direct Methanol Fuel Cell (DMFC))

  • 유선경;김한주;김태일;강경석;박수길
    • 전기화학회지
    • /
    • 제12권3호
    • /
    • pp.282-286
    • /
    • 2009
  • MWNT(CNTs)를 지지체로 촉매를 합성하고 특성평가를 진행하였다. $Pt/Au/TiO_2$는 CNTs(cabon 나노 튜브) 탄소 지지체에 첨가되어 직접 메탄올 연료 전지의 성능을 개선하였다. XRD와 SEM을 통해 아나타제 $TiO_2$와 Pt/Au를 확인하였고 각각의 입자 사이즈는 200 nm와 20${\sim}$25 nm 이다. 혼성 촉매의 활성은 CV를 통해 측정되었으며 제조된 촉매는 연료전지 이용에 유망하다.

$TiO_2$ 정밀여과막의 제조 및 특성 (Preparation and Characterization of $TiO_2$ Membranes for Microfiltration)

  • 한상욱;최세영;현상훈;조철구;강한규
    • 한국세라믹학회지
    • /
    • 제33권6호
    • /
    • pp.700-708
    • /
    • 1996
  • TiO2 membranes for microfiltration were prepared on $\alpha$-alumina support tube by slurry coating. The coating layer was obtained by flowing TiO2 slip on the inner surface of the alumina support. TiO2 membranes were heat-treated at 9$25^{\circ}C$ for 2 hrs. The thickness of the unsupported membrane was about 10${\mu}{\textrm}{m}$. The mean pore diameter of the membranes were 0.09 and 0.15${\mu}{\textrm}{m}$ respectively and the pure water flux was 900~1,200ι/m2.hr at room temperature and 1 bar. For a possible application of oily wastewater treatement an kerosene/wa-ter emulsion was separated in terms of flux and removal efficiency. In 60 min of operating time the flux of TiO2 membranes was 50~100 ι/m2.hr and removal efficiency was over 97% at 3kgf/cm2 of operating pres-sure and 600 ml/min of flow rate. TiO2 membranes could be recycled by reheat treatments at $600^{\circ}C$ for 2 hrs.

  • PDF

유튜브 데이터를 활용한 20대 대선 여론분석 (Analysis of public opinion in the 20th presidential election using YouTube data)

  • 강은경;양선욱;권지윤;양성병
    • 지능정보연구
    • /
    • 제28권3호
    • /
    • pp.161-183
    • /
    • 2022
  • 여론조사는 유권자들의 투표행위를 예측하고, 그 행위에 영향을 준다는 점에서 선거운동의 강력한 수단이자, 언론의 가장 중요한 기사거리로 자리잡고 있다. 하지만, 여론조사가 활발할수록 후보자들의 공약과 정책을 검증하기 보다 당선 가능성이나 지지도에 관한 조사만 반복적으로 실시하는 등 선거 캠페인에 관한 효과 측정에서 유권자들의 마음을 제대로 반영하지 못하는 경우가 많다. 여론조사의 선거 결과에 대한 부실한 예측이 언론사의 권위를 실추시켰다 하더라도, 어느 후보가 최종 승리할지에 대해 인간의 본능적인 궁금증을 풀어줄 명백한 대안이 없기 때문에 사람들은 여론조사에 대한 관심을 쉽게 놓지 못한다. 이에, 온라인 빅데이터를 통해 인사이트를 발굴하는 환경을 제공하는 썸트렌드의 '유튜브 분석' 기능을 활용하여 20대 대선에 대한 여론을 회고적으로 파악해 보고자 한다. 본 연구를 통해 간단한 유튜브 데이터 분석 결과만으로도 실제 여론(혹은 여론조사 결과)에 근접한 결과를 쉽게 도출하고, 성능이 좋은 여론 예측모형을 구축할 수 있음을 확인하였다.

1시간 자가호흡관찰에 의한 기계적 호흡치료로부터의 이탈 (Weaning Following a 60 Minutes Spontaneous Breathing Trial)

  • 박건욱;원경숙;고영민;백재중;정연태
    • Tuberculosis and Respiratory Diseases
    • /
    • 제42권3호
    • /
    • pp.361-369
    • /
    • 1995
  • 연구배경: 이탈의 방법은 통상적으로 자가호흡 관찰, IMV, PSV등이 행해지고 있지만, 이중 어떤 방법이 다른 것보다 우수하다는 결론은 없다. 자가호흡관찰에 의한 이탈에는 주로 T-tube를 이용하는 방법이 이용되는데, high flow로 산소를 공급하는 시스템이 필요하다. 이탈 후에는 기도유지가 어렵거나 지속적인 흡입치료가 필요한 경우를 제외하고는 발관을 하는 것이 호흡일을 감소시키는 것으로 알려져 있는데, 이는 기관내 튜브가 그 내경에 따라 다양하지만 정상 기도저항(< $2cmH_2O/L/sec$)보다 훨씬 더 높은 기도저항을 유발하기 때문이다. 이에 저자들은 기관내 튜브를 통한 산소공급으로 1시간 자가호흡관찰 후 이탈 및 발관을 동시에 시행하는 방법의 임상적 유용성을 보고하고자 한다. 방법: 대상은 1993년 6월부터 1994년 6월까지 호흡부전으로 기계적 호흡치료를 받은 환자들이며, 이탈시도의 기준은 첫째, 호흡부전을 초래한 기저질환이 호전되고, 둘째, 생명증후들이 안정한 상태로 유지되며, 셋째, $FiO_2$ 0.4 이하에서 동맥혈 가스분석상 산소분압이 55mmHg 이상인 경우로 하였다. 55명 중 위의 이탈기준을 만족시키는 18명의 환자의 평균 연령은 $51.5{\pm}17.5$세이며, 남녀비는 1:1 이였고, 총 기계호흡시간은 38시간에서 341시간의 범위(평균 $105.9{\pm}83.4$시간)를 보였다. 이탈방법은 이탈기준을 만족시키는 대상환자에서 기관내 튜브를 통해 분당 6L의 산소를 공급하고 1시간 367동안 이탈시킨 상태에서 의사가 환자 옆에서 이학적 소견 및 활력징후를 관찰하고, 30분과 60분 후에 각각 동맥혈 가스분석을 시행했다. 이 첫 1시간동안 환자의 전신상태, 호흡횟수, 맥박수 및 동맥혈가스분석등을 모두 고려하여 청색증, 발한, 심한 빈맥이나 고혈압, 혈압저하, 늑간의 내함, 기이호흡등이 나타나지 않고, 산소분압이 55~70mmHg 정도로 유지될 경우 일단 이탈성공이 기능하다고 판단하였다. 그리고, 다시 인공호흡기를 연결하여 1~2시간 동안 환자를 안정시킨 후, 최종 이탈과 발관은 환자에게 물어보아서 자가호흡을 할수 있다고 의사를 표현한 경우 동시에 이탈과 발관을 시행하도록 하였다. 결과: 1) 기계적 호흡치료를 받았던 55명 중 위의 이탈기준을 만족시키는 18명의 환자에게 총19회의 이탈을 시도하여 16회가 성공해 84.2% 성공율을 보였으며, 1명은 이탈 실패 후 2번째 이탈시도시 성공하였다. 2) 호흡부전의 원인별로는 만성폐쇄성 호흡기질환 환자 14명 중 8명에서 이탈시도의 기준을 만족시켰고, 폐혈증은 21명 중 4명, 폐부종은 6명 중 3명, 농약중독은 6명 중 1명, 속립성결핵은 3명 중 1명, 흡인성 폐렴은 5명 중 1명에서 이탈시도가 가능하였다. 3) 이탈성공군과 이탈실패군의 이탈 전후 분당 호흡 횟수의 변화를 보면, 성공군에서는 1예에서 이탈 후 30분에 분당 호흡횟수가 30회에 이른 후 감소한 것을 제외하고는 나머지 전례에서 분당 호흡횟수가 30회 미만이데 반해, 실패군에서는 모두 30회 이상의 분당 호흡 횟수를 보이고 지속적으로 증가하는 양상을 보였고, 이탈전후 산소분압의 변화를 보면 실패군의 1예를 제외하고는 나머지 전례에서 산소분압이 55mmHg 이상으로 유지되었다. 결론: 이상의 결과로 기관내 튜브를 통한 산소공급으로 1시간 자가호흡관찰 후 이탈 및 발관을 동시에 시행하는 방법은 상당히 높은 이탈 성공율을 보이는, 쉽고 효율적인 방법이며 동시에 이탈과 발관을 시행하여도 문제가 있는 경우는 없었다.

  • PDF

전방 기관성형술 -2례 보고- (Anterior Tracheoplasty -Two Cases Report-)

  • 선경;이서원;김정택;김광호;임현경
    • Journal of Chest Surgery
    • /
    • 제32권7호
    • /
    • pp.675-680
    • /
    • 1999
  • 소아의 흉부기관협착증 2례에 대해 자가심막을 이용해 전방 기관성형술을 실시\ulcorner였다. 증례 1은 9세된 여 아에서 발견된 선천성 기관협착증의 경우로 인공폐의 보조 아래 기관성형과 동반된 좌폐동맥 기시이상을 동 시에 근치하였다. 환아는 이식된 심막편이 종격조직에 고정될 때까지 수술 후 10일 간 기계호흡을 실시하였 다. 증례 2는 8세된 남아에서 기관절개술 후 하부기관협착이 발생한 경우로, 심막편 바깥을 늑연골편으로 보 강함으로써 수술 직후 기도삽관을 제거할 수 있었다. 2례 모두 수술 후 1년 이상의 관찰기간 동안 기관내경 이 잘 유지되고 있으며, 기관재건부위가 성장하는 소견을 보인다.

  • PDF

Types and Yields of Carbon Nanotubes Synthesized Depending on Catalyst Pretreatment

  • 고재성;이내성
    • 한국재료학회:학술대회논문집
    • /
    • 한국재료학회 2011년도 추계학술발표대회
    • /
    • pp.17.2-17.2
    • /
    • 2011
  • Double-walled carbon nanotubes (DWCNTs) were grown with vertical alignment on a Si wafer by using catalytic thermal chemical vapor deposition. This study investigated the effect of pre-annealing time of catalyst on the types of CNTs grown on the substrate. The catalyst layer is usually evolved into discretely distributed nanoparticles during the annealing and initial growth of CNTs. The 0.5-nm-thick Fe served as a catalyst, underneath which Al was coated as a catalyst support as well as a diffusion barrier on the Si substrate. Both the catalyst and support layers were coated by using thermal evaporation. CNTs were synthesized for 10 min by flowing 60 sccm of Ar and 60 sccm of H2 as a carrier gas and 20 sccm of C2H2 as a feedstock at 95 torr and $750^{\circ}C$. In this study, the catalyst and support layers were subject to annealing for 0~420 sec. As-grown CNTs were characterized by using field emission scanning electron microscopy, high resolution transmission electron microscopy, Raman spectroscopy, and atomic force microscopy. The annealing for 90~300 sec caused the growth of DWCNTs as high as ~670 ${\mu}m$ for 10 min while below 90 sec and over 420 sec 300~830 ${\mu}m$-thick triple and multiwalled CNTs occurred, respectively. Several radial breathing mode (RBM) peaks in the Raman spectra were observed at the Raman shifts of 112~191 cm-1, implying the presence of DWCNTs, TWCNTs, MWCNTs with the tube diameters 3.4, 4.0, 6.5 nm, respectively. The maximum ratio of DWCNTs was observed to be ~85% at the annealing time of 180 sec. The Raman spectra of the as-grown DWCNTs showed low G/D peak intensity ratios, indicating their low defect concentrations. As increasing the annealing time, the catalyst layer seemed to be granulated, and then grown to particles with larger sizes but fewer numbers by Ostwald ripening.

  • PDF

The Usefulness of Nasal Packing with Vaseline Gauze and Airway Silicone Splint after Closed Reduction of Nasal Bone Fracture

  • Kim, Hyo Young;Kim, Sin Rak;Park, Jin Hyung;Han, Yea Sik
    • Archives of Plastic Surgery
    • /
    • 제39권6호
    • /
    • pp.612-617
    • /
    • 2012
  • Background Packing after closed reduction of a nasal bone fracture causes inconvenient nasal obstruction in patients. We packed the superior meatus with Vaseline gauze to support the nasal bone, and packed the middle nasal meatus with a Doyle Combo Splint consisting of an airway tube, a silastic sheet, and an expandable sponge to reduce the inconvenience. In addition, we aimed to objectively identify whether this method not only enables nasal respiration but also sufficiently supports the reduced nasal bone. Methods Nasal ventilation was measured via spirometry 1 day before surgery and compared to 1 day after surgery. To compare support of the reduced nasal bone by the 2 methods, 2 plastic surgeons assessed the displacementon X-rays taken after the surgery and after removing the packing. The extent of nasal obstruction, dry mouth, sleep disturbance, headache, and swallowing difficulty were compared with visual analog scales (VAS) on a pre-discharge survey. Results In the experimental group, the nasal respiration volume 1 day after surgery remained at $71.3%{\pm}6.84%$ on average compared to 1 day prior to surgery. Support of the reduced bone in the experimental group ($2.80{\pm}0.4$) was not significantly different from the control group ($2.88{\pm}0.33$). The VAS scores for all survey items were lower in the experimental group than in the control group, where a lower score indicated a lower level of inconvenience. Conclusions The nasal cavity packing described here maintained objective measures of nasal respiration and supported the reduced bone similar to conventional methods. Maintaining nasal respiration reduced the inconvenience to patients, which demonstrates that this packing method is useful.

양극산화알루미늄의 형상제어와 이를 이용한 실리콘 분말 전극 지지체 효과 (Shape Control of Anodic Aluminum Oxide and Effect as Support of Silicon Powder Electrode)

  • 송주석;하종근;김유영;박동규;안인섭;안주현;조권구
    • 한국분말재료학회지
    • /
    • 제22권4호
    • /
    • pp.240-246
    • /
    • 2015
  • Anodic aluminum oxide (AAO) has been widely used for the development and fabrication of nano-powder with various morphologies such as particle, wire, rod, and tube. So far, many researchers have reported about shape control and fabrication of AAO films. However, they have reported on the shape control with different diameter and length of anodic aluminum oxide mainly. We present a combined mild-hard (or hard-mild) anodization to prepare shape-controlled AAO films. Two main parameters which are combination mild-hard (or hard-mild) anodization and run-time of voltage control are applied in this work. The voltages of mild and hard anodization are respectively 40 and 80 V. Anodization was conducted on the aluminum sheet in 0.3 mole oxalic acid at $4^{\circ}C$. AAO films with morphologies of varying interpore distance, branch-shaped pore, diameter-modulated pore and long funnel-shaped pore were fabricated. Those shapes will be able to apply to fabricate novel nano-materials with potential application which is especially a support to prevent volume expansion of inserted active materials, such as metal silicon or tin powder, in lithium ion battery. The silicon powder electrode using an AAO as a support shows outstanding cycle performance as 1003 mAh/g up to 200 cycles.

The Impact of Social Media Functionality and Strategy Alignment to Small and Medium Enterprises (SMEs) Performance: A Case Study in Garment SME in East Java

  • Mahendrawathi ER;Nanda Kurnia Wardati
    • Asia pacific journal of information systems
    • /
    • 제30권3호
    • /
    • pp.568-589
    • /
    • 2020
  • Recently, Social media has become a concern for businesses, including Small and Medium Enterprises (SMEs). SMEs began to adopt social media to support their performance. To benefit from the application of social media, SMEs must implement the right strategy. This study aims to analyze the factors that influence the use of social media in SMEs. Furthermore, alignment between social media functionalities and strategies and their effect on SME's performance are investigated. A case study is conducted in Gymi, a garment SMEs in East Java, Indonesia. The data collection includes interviews with the owner of SMEs, observations, and document analysis. Data analysis is performed by pattern matching, which matches the patterns from the literature with data from the case study. The results of this study show that cost-effectiveness, interactivity, and compatibility are factors that influence the use of social media in Gymi. The social media used by Gymi are Instagram, Facebook, YouTube, WhatsApp, and LINE. However, the main social media used to support Gymi's functions is Instagram. Gymi has a relatively good social media strategy as it has defined a specific goal, target audience, and channel selection for social media (Instagram). It also has specific resources and policies to handle social media. Gymi monitors and evaluates their social media content activities. These strategies are aligned with the Instagram feature used to support Gymi's function, particularly marketing, sales, customer service, and to some extent, internal operation. The alignment contributes to Gymi's performance measured by the increase in reputation (number of Instagram followers) and sales.

실리카-지르코니아 분리막 성능에 대한 다공성 지지체와 중간층의 영향 (The Effect of Porous Support and Intermediate Layer on the Silica-zirconia Membranes for Gas Permeation Performance)

  • 이혜련;서봉국
    • 멤브레인
    • /
    • 제25권1호
    • /
    • pp.15-26
    • /
    • 2015
  • 본 연구에서는 기공의 크기가 큰 다공성 지지체를 $3{\sim}4{\mu}m$, 150 nm의 크기를 갖는 ${\alpha}$-알루미나 입자를 물과 실리카-지르코니아 용액에 각각 분산시키는 방법으로 표면 개질을 하였다. $3{\sim}4{\mu}m$ 크기의 알루미나 입자가 분산된 용액을 이용하여 금속 지지체 및 알루미나 지지체에 코팅하였을 때, 코팅횟수가 증가할수록 지지체의 표면의 큰 기공이 감소하였고, 여기에 150 nm 크기의 알루미나 입자가 분산된 용액으로 추가 코팅을 하면 작은 크기의 알루미나 입자가 기공 사이사이에 들어가면서 지지체를 좀 더 매끄럽게 개질하는 역할을 하는 것을 확인하였다. 특히 실리카-지르코니아 용액을 분산매로 하여 표면 개질을 한 경우, 알루미나 입자가 실리카-지르코니아 층에 촘촘하게 박힌 모양으로 고정이 되어 지지체 개질에 효과적임을 확인하였다. 이러한 방법으로 제조된 실리카-지르코니아 분리막의 기체투과도는 상온에서 각각 $1.8-8.4{\times}10^{-4}mol{\cdot}m^{-2}{\cdot}s^{-1}{\cdot}Pa^{-1}$, $3.3-5.0{\times}10^{-5}mol{\cdot}m^{-2}{\cdot}s^{-1}{\cdot}Pa^{-1}$이며 수소/질소 선택도는 Knudsen 분포를 보였다. 표면 개질된 지지체에 다양한 분리층을 형성하는 방법으로 무기 분리막 응용에 이용할 수 있을 것으로 예상된다.