• Korean Journal of Biological Psychiatry
• /
• v.20 no.4
• /
• pp.144-150
• /
• 2013

Objectives The number of marriage immigrant women has been increasing in the past several years in Korea and their adaptations to the new environment have been an important social issue. The aims of this study were to evaluate the psychosocial and mental health statuses of Vietnamese marriage immigrant women (VMIW). We intended to compare the mental health of VMIW with married Vietnamese women living in Vietnam and reveal the demographic or psychosocial factors affecting their mental health. Method Subjects comprised one-hundred-forty-three VMIW who enrolled in multiculture family support centers in Chungbuk Province and forty-eight women from Vinh Phuc province in Vietnam. Marital satisfaction, domestic violence and social support were evaluated as psychosocial factors, and the Beck Depression Inventory (BDI), Beck Anxiety Inventory (BAI) and General Health Questionnaire (GHQ) were used to evaluate mental health. Results VMIW had a larger age gap with their husbands but better psychosocial statuses. BDI (p = 0.20), BAI (p = 0.08), GHQ (p = 0.13) scores of VMIW were not significantly different compared to Vietnamese residents. Marriage duration of VMIW affects significantly their marital satisfaction, social support and depressive levels (p < 0.01). The level of domestic violence showed a significant difference according to the educational levels of their husbands, composition of family members and marriage process (p < 0.05). VMIW with older husbands and jobless VMIW had low levels of anxiety (p < 0.01). Conclusion The results suggest that VMIW have no difference in mental health compared to Vietnamese women living in Vietnam which is contrary to general expectations. However, various environmental factors, such as marriage duration, have an effect on the mental health of VMIW. As marriage duration is proven to be important factor on mental health of VMIW, more extended duration of care and interventions are needed to maintain good mental health. Networking system connecting mental health screenings by the multiculture family support center to the local mental healthcare center is needed to care those with poor screening outcomes.

• Journal of Distribution Science
• /
• v.13 no.6
• /
• pp.87-96
• /
• 2015

Purpose - Several domestic telecommunication companies have made a considerable effort to continuously grow and survive, and they have strived to thrive in the midst of mature market competition. To overcome this challenging situation and to grow continuously, while still meeting customer needs that are becoming more diverse and complicated with the passage of time, extensive support for internal marketing is essential. Without such internal support, companies face serious limitations and market roadblocks. The communication industry is a high-level service industry and a basic communications industry characteristic is its significant dependence on the employees delivering the services. Therefore, entrepreneurs in the information/communications industry, as well as existing competitors, should look to satisfy external customers through critical investment in internal customers (employees). Therefore, it is important for research to examine how internal factors influence technology innovation and service quality, which are the key drivers for companies that are seeking leading market positions. Research design, data, and methodology - The purpose of this study is to analyze the relationship of technology innovation and perceived service quality with the internal marketing factors in the communication industry and to offer suitable and effective internal marketing suggestions. The independent variables of this study are internal communication, education and training, the support of the executives, reward systems, and empowerment. The dependent variables are technology innovation and perceived service quality. Utilizing these, this paper studies the influence of internal marketing factors on technology innovation and perceived service quality. Results - The study results revealed the following. First, the identified internal marketing factors have a positive effect on technology innovation. Among the five internal marketing factors, three had a significant effect on product innovation, empowerment, the support of executives, and education and training, in this order. Second, the internal marketing factors also had a positive effect on the process innovation of technology innovation. The marketing factors, the support of executives, empowerment, internal communication, and education and training, in this order, significantly affect process innovation. Third, technology innovation had a positive effect on perceived service quality. All of the five service quality factors, namely, tangibles, reliability, assurance, responsibility, and empathy, in this order, significantly affect product innovation. Additionally, tangibles, reliability, responsibility, empathy, and assurance, in this order, significantly affect process innovation. Fourth, product and process innovation significantly affect tangibles and reliability in technology innovation. To enhance tangibles and reliability, process innovation should first be enhanced. Fifth, product and process innovation significantly affect responsibility and empathy in technology innovation. To enhance the responsibility and empathy, process innovation should first be enhanced. Sixth, product and process innovation significantly affect assurance in technology innovation. To enhance the assurance, product innovation should first be enhanced. Conclusions - According to the results, a company's internal marketing factors have a positive and significant effect on technology innovation and, further, product and process innovation have a positive and significant effect on the perceived serviced quality.

• Journal of Digital Convergence
• /
• v.11 no.8
• /
• pp.127-141
• /
• 2013

In this study, we analyzed causal relationships between technology orientation and technological performance, between technological performance and commercialization speed on the government -funded R&D projects in 2009 for searching the cause of the big gap between technological success rate and commercialization success rate. In the result, technology orientation affected negatively on the technological performance, but the technological performance affected positively on the commercialization speed. These results mean that low technology oriented projects are easy to reach the selling step of products faster but they are not easy to attain a balanced income and outgo in contrast to the firms' own R&D. we found it was caused by a defect in the government's R&D support and management system.

• Journal of Korean Society for Atmospheric Environment
• /
• v.25 no.5
• /
• pp.410-419
• /
• 2009

Generally, air pollutant emission at workplace is estimated by two methods: indirect methods using emission factors and direct methods based on CEMS (Continuous Emission Monitoring System). CAPSS (Clean Air Policy Support System) is a representative indirect method and the national air pollutant database of Korea. However, characteristics of some workplaces may create a gap between CAPSS and CEMS data. For improving of emission data accuracy, emission data of CEMS (named CleanSYS) equipped at 138 target workplaces were compared with those of CAPSS. As a result, $SO_x$ and $PM_{10}$ emission levels obtained by CAPSS were lower than those of CleanSYS. $SO_x$ and $PM_{10}$emission ratios were 61.5% and 71.2% lower respectively, showing the biggest gaps. On the other hand, $NO_x$ emission of CAPSS was higher by 10.4%. $SO_x$ showed the biggest difference in 'Energy industry combustion' and $NO_x$ did in 'Production Process' within the SCC category. $PM_{10}$ presented a large gap in 'Manufacturing industry combustion.' The differences in $SO_x$ between the two systems occurred because some large-size facilities lack pollution controllers or efficient pollution controllers. Based on this study, CAPSS emission database of Korea will improve accuracy through adopting CEMS emission system, which enables more efficient national atmospheric policies and workplace management.

• Korea Journal of Hospital Management
• /
• v.21 no.1
• /
• pp.1-13
• /
• 2016

As the importance of strengthening the competency of managers who are in charge of cash collection and disbursement, and preparing for financial statements becomes more visible, this study examined the competency of middle-level managers of accounting department in general hospitals in Korea. Based on the literature, competency was measured by seven components: achievement and action, service, influence, management, cognition, individual effectiveness, and change management. Survey questionnaires included the respondents' perceived importance and performance of each of the seven components of competency. A total of 84 managers from 29 general hospitals responded to the survey between October 2015 and November 2015. Descriptive statistics, mean comparison (t-tests and ANOVAs), and multiple linear regression were conducted. The results of this study are as follows. Overall perceived importance of the competency was 4.16, while the performance was 3.87, and thus, the difference was 0.29. Among the seven components of the competency, cognition and change management had higher scores in terms of difference between the importance and performance. The regression analyses found that female managers had higher perceived importance and performance of competencies in achievement and action, and influence compared to male counterparts. In addition, participants in this study responded that main reasons for the gap between the perceived importance and performance are low compensation, lack of support, lack of knowledge, insufficient technical experience, excessive workload, and regulations. The results of this study can be used when designing capacity building training opportunities for the hospital accounting department. Also, the managers may evaluate themselves and look at the areas where they can narrow the gap between the perceived importance and performance of the competency that is required for today's leading managers.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.04a
• /
• pp.42-42
• /
• 2008

Considerable attention has been focused on the applications of flexible liquid crystal (LC)-based displays because of their many potential advantages, such as portability, durability, light weight, thin packaging, flexibility, and low power consumption. To develop flexible LCDs that are capable of delivering high-quality moving images, like conventional glass-substrate LCDs, the LC device structure must have a stable alignment layer of LC molecules, concurrently support uniform cell gaps, and tightly bind two flexible substrates under external tension. However, stable LC molecular alignment has not been achieved because of the layerless LC alignment, and consequently high-quality images cannot be guaranteed. To solve these critical problems, we have proposed a PDMS pixel-wall based bonding method via the IB irradiation was developed for fasten the two substrates together strongly and maintain uniform cell gaps. The effect of the IB irradiation on PDMS with PI surface was also evaluated by side structure configuration and a result of x-ray photoelectron spectroscopic analysis of PDMS interlayer as a function of binder with substrates. large number of PDMS pixel-walls are tightly fastened to the surface of each flexible substrate and could maintain a constant cell gap between the LC molecules without using any other epoxy or polymer. To enhance the electro-optical performance of the LC device, we applied an alignment method that creates pretilt angle on the PI surface via ion beam irradiation. Using this approach, our flexible LCDs have a contrast ratio of 132:1 and a response time of about 15 ms, resulting in highly reliable electro-optical performance in the bent state, comparable to that of glass-substrate LCDs.

• Journal of Preventive Medicine and Public Health
• /
• v.39 no.3
• /
• pp.263-269
• /
• 2006

Objectives: As the number of people with disabilities is increasing and their needs for care are varied, the continuum and comprehensiveness of their rehabilitative care are getting more important. This study was performed to understand the utilization of rehabilitation services and requirements of care among the people with severe disabilities in Korea. Methods: We interviewed 578 disabled persons who had severe extremity and cerebral impairment in the urban and rural areas of Korea. The questionnaire included questions on their general characteristics, the type of disability, their physical function (ADL, IADL), their use of rehabilitation services after discharge and their requirements for rehabilitation care Results: Only 12.6% of people with disability in the community continuously used the available medical rehabilitation care. The associated factors for utilization of rehabilitation services were pain and admission for rehabilitative treatment in the acute phase. There was a great need for rehabilitation services in community and this varied according to gender, the socio-economic status, the functional status and the geographic region. The gap between utilization and need for rehabilitation services was largest in the economic support. The gap of primary health care was larger in the rural area than in the urban area. Conclusions: The needs for rehabilitation service were diverse according to the individual functional status, the regional characteristics and other general characteristics of people with disability. Strategies should be considered to eliminate the barriers to obtain rehabilitation services for the people with disability in the community.

• Human Ecology Research
• /
• v.58 no.2
• /
• pp.255-266
• /
• 2020

This study observed and investigated the commute time of dual-earner couples from a family developmental perspective. It tested whether the household responsibility hypothesis was effective in explaining the gender gap in the commute time for these couples. I extracted 2,103 time diaries written by 1,266 matched couples from the 2014 Korean Time Use Survey data for this study. The sample was categorized by the age of the eldest child into four age groups of 0-6, 7-12, 13-18, and 19-29. Analytic results from ANOVA, Scheffé test, and OLS regression are as follows. First, husbands traveled longer hours to work than wives in all age groups, while the commute time of couples tended to increase along with the child' age. However, couples in the child group aged 7 to 12 had the shortest commute time. Second, domestic labor time of wives were negatively associated with the commute time, which appeared to support the household responsibility hypothesis. Third, in the child group aged 7 to 12, wives spent more time for work commute as their income increased; however, wives with traditional gender role attitudes had a shorter commute time in the child group aged 0 to 6. Forth, neither the wives' nor husbands' work characteristics were related to the wives' commute time; however, both wives' and husbands' work characteristics were related to the husbands' commute time. The findings suggest the possibility of spatial entrapment by working wives throughout the family life cycle due to household responsibilities, which provides implications for policy intervention in consideration of the gender gap in commute time for dual-earner couples.

• Journal of the Korean Geosynthetics Society
• /
• v.10 no.2
• /
• pp.13-19
• /
• 2011

Precast culvert system is generally constructed with a series of process such as excavation, ground mitigation, placement of culverts, anti-leakage packing between adjacent culverts, post-tensioning for PS strands and backfilling. In this process inappropriate ground mitigation often causes differential settlement and, correspondingly, makes water-leakage to be occurred between adjacent boxes. This study was performed to understand the behavioral characteristics of recently proposed precast foundation plate to support precast culvert system through on-site pilot construction. The gap between two adjacent culverts, increment of earth pressure at the bottom of culvert, vertical settlement of top of the culverts were monitored using various sensors. The monitoring results showed that the proposed foundation plate provides better culvert system in the points of less gap development, earth pressure and settlement at the adjacent of two culverts.

• Journal of IKEEE
• /
• v.2 no.1 s.2
• /
• pp.114-121
• /
• 1998

This paper proposed a collision avoidance scheme to improve the network performance and priority control scheme to support real-time ATM applications in CIF(Cells in Frames), which carries ATM cells over existing Ethernet interfaces. The proposed scheme has optimized for the two nodes Ethernet, that is a typical CIF network, and doesn't require any hardware modification of existing Ethernet interface card. The collision avoidance scheme gives fair access opprtunities with minimized contention to the nodes by assigning different inter-frame gap to each element of CIF network. The priority control scheme guarantees preemptive transmission of real-time frames to the medium by exchanging queuing status information between two nodes. Therefore in this paper it is shown that CIF network which has both the collision avoidance scheme of MAC layer and the priority control scheme of CIF layer has a improved network performance and supports real-time ATM applications efficiently.