• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.11
• /
• pp.348-354
• /
• 2016

This study was conducted to investigate policy priority with respect to development of a smart farming system. Professors, researchers and policy makers in related fields were surveyed to develop a long-term plan and improved direction for the smart farming system, and the AHP (Analytic Hierarchy Process) was used for analysis. Overall, 61 experts in the frontiers of the field were surveyed and 42 questionnaires were analyzed. The results showed that the most important factors influencing development plans are increasing the income of farmers, minimizing management costs and standardizing and localizing smart farming systems. However, some plans differ with respect to economic and technology factors; therefore, those things should be analyzed in more detail by experts.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.35 no.3
• /
• pp.91-102
• /
• 2019

This study explores the causes and processes of morphological transformation of apartment complexes in Busan. All apartment complexes built until the year 2016 were selected for statistical analysis, drawing/map examination, field observation, selected expert interviews based on 6 periodical groups: Period I(~1990), Period II(1991~1995), Period III(1996~2000), Period IV(2001~2005), Period V(2006~2010), and Period VI(2011~2016). The research argues for three 'arrangement' types, P1U, L1U and P2U, which have dominated the whole periods occupying 88% of the total 260 complexes. The switch of the leading type represents for morphological transformation of apartment complexes. Four aspects, density(F.A.R.), height(maximum number of floors), deformed-building-type ratio, and building-orientation, have affected the change of 'arrangement' types. Density was the major cause of the arrangement-type switch, from P1U to L1U, on Period II(1991~1995). The morphological change, from type L1U to P2U, on Period V(2006~2010) was caused by height and orientation, and is correlated with the increased number of deformed-type buildings. The first phase morphological change on Period II(1991~1995) was resulted by the supply side of apartment. However, the second phase transformation on Period V(2006~2010) had gone through the complex process including reflection of consumers' demands. The significance of research is to reveal the morphological transformation process of apartment complexes through analytical investigation of the entire apartment data in Busan. The result shows that the major change of urban paysage started to occur from Period V(2006~2010), and the superficial evaluation on apartment 'being monotonous and repetitive' may not be proper at least from the perspective of town plan.

• Journal of Bio-Environment Control
• /
• v.26 no.4
• /
• pp.242-248
• /
• 2017

This study was conducted to develop a cylindrical paperpot manufacturing equipment which is capable of continuously producing paperpots with a constant size. The equipment consists of the soil supply part, the paper supply part, the pot manufacturing part, the paperpot cutting part and its process for manufacturing paperpot from the soil supply to the paperpot cutting is continuously performed. As a result of the performance test using this equipment, we suggest that the optimal moisture content and injection pressure to supply soil are 50%~60%, and 0.5 Mpa respectively. Moreover the appropriate temperature for adhesive strength is $150{\sim}160^{\circ}C$ taking into account the performance of device and adhesion time. Also, considering the cutting speed and safety, it is appropriate to adopt a straight blade having a clean plan at a minimum angle of $30^{\circ}$. In addition, the manufacturing capacity of the developed equipment was 3300 pots per hour.

• Journal of Environmental Policy
• /
• v.3 no.1
• /
• pp.55-69
• /
• 2004

Bioenergy can be obtained from various forms of biomass such as agricultural, food processing, and municipal wastes. Recently, its importance is recognized more seriously because of its positive impacts on economic and stable energy supply and environmental sustainability. Despite its advantages, bioenergy has not been used as much as it was expected, nor has it been developed to the level of attractive commercialization in energy market. The main reasons for the sluggish progress have been analyzed by comparing the bioenergy policies in Korea and U.S.A. Both Korea and U.S. governments have recognized the importance of bioenergy and put in various efforts to promote the use of bioenergy. Both governments have legislated alternative energy promotion plans that support R&D, tax reduction, rewards, and low interest loans. However, it is suggested that the bioenergy policy and plan juxtapose the financial supports (R&D, tax exemption, low interest loan, education, etc.) with strong mandates and obligations. Although imposing strong mandates prerequisites the economically attractive and feasible technologies, it can motivate and speed up more effective technology development, in turn. In addition, the bioenergy R&D support must include studies on commercialization and marketing as well as process development. R&D on the socioeconomic effects of bioenergy should also be supported. Lastly, decision making processes for the bioenergy policy, and for alternative energy overall, must include environmental agencies for taking advantage of environmental benefits of bioenergy.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• v.y2004m10
• /
• pp.91-94
• /
• 2004

The demand for apartments is decreasing as the condition of housing market in Korea has changed. Therefore, construction companies have to understand the needs of the customers to win over them. It is important for construction companies not only to supply customers with high quality apartments but also to provide them high service quality for a long range plan. One of the important service of the construction companies is after-service(A/S) that includes the defect management. The inhabitants' unsatisfactory defect management will worse the image of the company among the future customers. Also A/S is one of the best way for the company to create good impression to the customers. so the defect management carried out by construction firms has to satisfy the inhabitants. In this study. the degree of association between inhabitants satisfaction and the company's image is proved and the factors of the inhabitants dissatisfaction in defect-management are presented. The major factor that causes dissatisfaction is the long service time of the defect management. Therefore, shortening the time of process taken to deal with the defects would allow construction outfits to satisfy their customers effectively and to be more competitive ones in the Korean apartment market.

• Land and Housing Review
• /
• v.9 no.2
• /
• pp.1-7
• /
• 2018

The purpose of this study is to suggest diagnosis indicators and checklist for urban regeneration projects by Korea Land & Housing Corporation(LH). There are already deprivation indices in the Urban Regeneration Act but not any additional guidelines in the practical aspect. In order to use the diagnosis indicators, the central government should supply more specific checklist to the actors in the regeneration field. The key actor of many stakeholders is LH as an operator and implementer in the regeneration projects. So far, LH has developed housing and cities and there haven't been any obvious changes to realize public benefit in the deteriorated area. From now on, It has to plan, implement, and manage a lot of regeneration projects entirely. Therefore, It is necessary to develope and apply the diagnosis indicators and checklist based on projects. This paper came up with the 6 factors related with LH business field : housing, urban infrastructure, public service, private service, environment, and smart city. For these, 32 diagnosis indicators and 72 checklists were selected that can include both physical and qualitative indicators. These can be used not only for the selection of regeneration projects but also for the process monitoring such as planning and implementation.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.305-306
• /
• 2006

In process for production of Rubber Scheme Product that have the most inferior Working Environment is Medicine mixture and Scheme processing. Applying automation and Environment Treatment technology to the hazardous chemical and mixture processing, Through developed 'Mixture Automatic Machine for hazardous chemical Interruption type that is occurred at mixing rubber medicines', we try to decline worker's intensity of labour, Also overcomes solution of work evasion phenomenon and manpower supply and demand's difficulty by forming agreeable working environment and through the automatic scheme and mixture processing by preventing that hazardous chemical had known as disease causes of various importance disease is exposed to worker during the work. and we plan to do so that production of high added value product may be available.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.11
• /
• pp.3163-3169
• /
• 2009

To secure superiority in keen competition among ports and to satisfy demands of shippers and shipping companies who are a main customer of ports, logistics service should be improved. However, most of dissatisfaction for logistics service arises from frequent transportation changes of shippers and inaccuracy of cargo-working information offered from shipping companies and inaccuracy of cargo information carried in from carriers. Therefore, the study embodied BPR and yard management prototype system on the basis of the process of business flow in yard to settle the above problems. The study also checked that information of booking list in a yard-allocated plan could be applied to forming efficient collaborative supply networking in yard management by supplementing insufficient cargo.

• Korean Institute of Interior Design Journal
• /
• v.23 no.4
• /
• pp.140-148
• /
• 2014

The objective of this study is to address Effective Learning Methodology by subjects to acquire National Certification which is an essential requirement to get employed. For this purpose, analysis was completed after conducting a survey on the class to obtain Interior Architecture Engineer Certification. 23 applicants were selected based on effectiveness of each subject, level of difficulty, degree of understanding, mentoring effect, self-driven learning, and group discussion. Results are as below. Upon the first written test, Interior Design Theory and Chromatics showed a high learning effectiveness in self-driven learning and mentoring. Ergonomics showed a high learning effectiveness in mentoring, self-driven learning and group discussion while Building Materials, Architecture Construction presented a high effectiveness only in mentoring and group discussion. Architecture Environment showed average learning effectiveness in mentoring and group discussion and showed a low effectiveness in self-driven learning. Upon the second practice test, Interior Architecture Construction and Planning/Management of Construction Materials presented an average learning effectiveness in mentoring and group discussion. Process Control and Adding Up(Supply Calculation) showed a low learning effectiveness in self-driven learning and presented an average to below average learning effectiveness in mentoring and group discussion. Lastly, Interior Design Plan, Interior Design Drawings presented average learning effectiveness in mentoring and group discussion however they showed a high effectiveness in self-driven learning.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2007.11a
• /
• pp.781-786
• /
• 2007

According to increase in supply of public rental housing, in connection with support plan of housing welfare from government, necessity of maintenance management is coming to be important. By analyzing characteristics of public rental housing and maintenance management system, this study grasped developmental possibility of a web based maintenance management system as well as a critical point for improvement of problem and elevation of efficiency about maintenance management process. As we present not only useful possibility of ubiquitous equipments utilizing IT like PDA but effectiveness by using, based on this result, we represent course of improvement to systematic development for user that complement the existing maintenance management system which is currently developed.