• Korean Journal of Construction Engineering and Management
• /
• v.6 no.3 s.25
• /
• pp.61-71
• /
• 2005

The number of domestic foreign worker increased rapidly In the 90s, and Domestic foreigner worker occupied important position in the various manufacturing industries or 3D types of business. In these situation, Government had kept policy that import foreigner worker through system for industrial technology trainee. Distinction and outrage about foreign worker who have ambiguous social position made many place of business seceders. At August,2004 a new introduced employment permit system has great significance that has fundamentally and drastically changed current foreign immigrant policy from the basis. Introduction of Employment permit system is expected to affect much effects to construction industry as well as manufacturing industry and service industry. In this research, with foreign worker and information of employment permit system investigated personnel expenses, work quality and attitude, labor power supply and demand, communication to affect in construction field at employment permit system through questionnaire with field administrators. This research will remove a side effect in construction industry through administrators' awareness and wish to present confrontation way.

• Archives of Reconstructive Microsurgery
• /
• v.5 no.1
• /
• pp.106-111
• /
• 1996

Purpose : Propose a surgical technique in donor harvesting method in free vascularized proximal fibular epiphysis. Methodology : Concerned about growth potentials of the transplanted epiphysis in our long term results of the epiphyseal transplanted 13 cases more than 4 years follow-up, anterior tibial artery which contains anterior tibial recurrent artery is most reliable vessel to proximal fibular epiphysis which is the best donor of the free vascularized epiphyseal transplantation. In vascular anatomical aspect proximal fibular epiphysis norished by latearl inferior genicular artery from popliteal, posterior tibial recurrent artery and anterior tibial recurrent artery from anterior tibial artery and peroneal artery through metaphysis. The lateral inferior genicular artery is very small and difficult to isolate, peroneal artery from metaphysis through epiphyseal plate can not give enough blood supply to epiphysis itself. The anterior tibial artery which include anterior tibial recurrent and posterior tibial recurrent artery is the best choice in this procedure. But anterior tibial recurrent artery merge from within one inch from bifucating point of the anterior and posterior tibial arteries from popliteal artery. So it is very difficult to get enough vascular pedicle length to anastomose in recipient vessel without vein graft even harvested from bifucating point from popliteal artery. Authors took recipient artery from distal direction of anterior tibial artery after ligation of the proximal popliteal side vessel, which can get unlimited pedicle length and safer dissection of the harvesting proximal fibular epiphysis. Results : This harvesting procedure can performed supine position, direct anterolateral approach to proximal tibiofibular joint. Dissect and isolate the biceps muscle insertion from fibular head, micro-dissection is needed to identify the anterior tibial recurrent arteries to proximal epiphysis, soft tissue release down to distal and deeper plane to find main anterior tibial artery which overlying on interosseous membrane. Special care is needed to protect peroneal nerve damage which across the surgical field. Conclusions : Proximal fibular epiphyseal transplantation with distally directed anterior tibial artery harvesting technique is effective and easier dissect and versatile application with much longer arterial pedicle.

• Journal of Power Electronics
• /
• v.10 no.5
• /
• pp.548-554
• /
• 2010

In this paper, a 1.5 kW Interior Permanent Magnet Synchronous Generator (IPMSG) with a power conditioner for the grid integration of a variable-speed wind turbine is developed. The power-conditioning system consists of a series-type 12-pulse diode rectifier powered by a phase shifting transformer and then cascaded to a PWM voltage source inverter. The PWM inverter is utilized to supply sinusoidal currents to the utility line by controlling the active and reactive current components in the q-d rotating reference frame. While the q-axis active current of the PWM inverter is regulated to follow an optimized active current reference so as to track the maximum power of the wind turbine. The d-axis reactive current can be adjusted to control the reactive power and voltage. In order to track the maximum power of the wind turbine, the optimal active current reference is determined by using a simple MPPT algorithm which requires only three sensors. Moreover, the phase angle of the utility voltage is detected using a simple electronic circuit consisting of both a zero-crossing voltage detecting circuit and a counter circuit employed with a crystal oscillator. At the generator terminals, a passive filter is designed not only to decrease the harmonic voltages and currents observed at the terminals of the IPMSG but also to improve the generator efficiency. The laboratory results indicate that the losses in the IPMSG can be effectively reduced by setting a passive filter at the generator terminals.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.26 no.10
• /
• pp.754-759
• /
• 2013

Aluminum oxide($Al_2O_3$) film deposited by atomic layer deposition (ALD) is known to supply excellent surface passivation properties on crystalline Si surfaces. Since $Al_2O_3$ has fixed negative charge, it forms effective surface passivation by field effect passivation on the rear side in p-type silicon solar cell. However, $Al_2O_3$ layer formed by ALD process needs very long process time, which is not applicable in mass production of silicon solar cells. In this paper, plasma-assisted ALD(PA-ALD) was applied to form $Al_2O_3$ to reduce the process time. $Al_2O_3$ synthesized by ALD on c-Si (100) wafers contains a very thin interfacial $SiO_2$ layer, which was confirmed by FTIR and TEM. To improve passivation quality of $Al_2O_3$ layer, the deposition temperature was changed in range of $150{\sim}350^{\circ}C$, then the annealing temperature and time were varied. As a result, the silicon wafer with aluminum oxide film formed in $250^{\circ}C$, $400^{\circ}C$ and 10 min for the deposition temperature, the annealing temperature and time, respectively, showed the best lifetime of 1.6ms. We also observed blistering with nanometer size during firing of $Al_2O_3$ deposited on p-type silicon.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.58 no.3
• /
• pp.357-361
• /
• 2009

This study performed analysis on the thermal pattern and current characteristics of an LED ((Light Emitting Diode) street lamp. It did this using a TVS (Thermal Video System) to analyze the LED street lamp's thermal pattern, and measured its characteristics using an oscilloscope. The ambient temperature and humidity during the experiment were maintained at $24{\pm}2[^{\circ}C]$ and 50~60[%]. The capacity of the LED street lamp was 120[W] and nine sets of modules were arranged at uniform intervals. On one module, 24 LED lamps were arranged in a radial pattern. The analysis of the thermal diffusion pattern at the front of the LED lamp showed that the maximum surface temperature was approximately $34[^{\circ}C]$. In addition, there was almost no change in the temperature of the upper cover, and the temperature at the side showed a uniform thermal diffusion pattern. The surface temperature of the converter converting AC to DC increased to approximately $46[^{\circ}C]$. The analysis results of the thermal characteristics of one LED indicated uniform thermal characteristics for an initial eight minutes. However, the temperature at the center of the LED increased to approximately $82[^{\circ}C]$ after 12 minutes had elapsed. It can be seen from this that the temperature at the center of the LED was higher than the allowable temperature, $70[^{\circ}C]$ of the insulating material for general electrical devices. Therefore, it is necessary to design a lamp in such a way that the plastic insulating material does not come into contact with or get close to the LED lamp. The voltage of the LED lamp converted by the AC/DC converter was measured at DC 27[V] and the current was DC 13[A]. Consequently, it can be seen that in order to secure an adequate light source, it is important to supply a stable current that was greater than the current of other light sources. Therefore, appropriate radiation of heat is required to secure the stability and reliability of the system.

• Tribology and Lubricants
• /
• v.30 no.3
• /
• pp.183-188
• /
• 2014

In this paper, we present our analysis of tribological failure examples for an anti-lock brake system(ABS) in a car. The study range of this paper is to improve the quality of ABS system by analyzing with sensor, computer, actuator and oil lines. In the first example, the brake leak from hydraulic supply line in a caliper on the rear left side of the ABS hydraulic modulator. This produces the sponge phenomenon, where the car does not brake even when the driver operates the brake pedal. The hydraulic unit operating ABS is actuator that play role regulating drive condition according with the oil pressure supplied with wheel of a car. In the second example, the service man does not completely tighten the fixed bolt after repairing the car. This causes the ABS warning lamp to light up as the ABS wheel speed sensor cannot detect whether the ABS has been activated. In the third example, the ABS electronic control unit is separated from the soldered part of the inner circuit board. Consequently, the ABS fails in control because the ABS motor pump receives no-signal for the hydraulic unit. The wheel speed sensor has to large durability because of giving signal of acting condition to computer by detected the acceleration and deceleration of wheel of a car. In the fourth example, the ABS warning lamp lights up of when cracks propagate in the circuit board soldering part. The circuit of this computer is very important part for input and output the operating signal of system. Such failures can aggravate the durability of the ABS. Thus, the ABS needs to be optimized to eliminate malfunction phenomenon.

• Archives of Plastic Surgery
• /
• v.33 no.5
• /
• pp.541-545
• /
• 2006

Purpose: There are many methods for the reconstruction of the facial defect after an excision of a skin cancer; such as skin graft, local flap, free flap, etc... Skin graft has its' limitations; it could remain in different color with in regards of the recipient to donor, with an unfavorable scar. Free flap can lead to big donor site morbidity with long operation time and uncontrolled scar as a disadvantage factor. Compared to the prior, local flap offers several merits; sufficient blood supply, good tissue quality and short operation time. We revised 'V-Y-S flap' for the facial defect, which proved to have favorable outcomes. Methods: Total 7 V-Y-S flaps were performed to patients with skin cancers(six squamous cell carcinoma and one basal cell carcinoma). Two of these flaps were combined with composite grafts, one with full thickness skin graft. Six patients were female and one male. The average diameter of defects after excision was 2.3 cm. The follow-up period was 18 months maximally. Results: We treated seven facial skin cancers with 'V-Y-S flap'. There were no flap necrosis, cancer recurrence and scar contracture as a result. Furthermore, this method also offers a favorable central scar line that is parallel to the nasolabial fold and the nasojugal groove, especially in the nasolabial area and superomedial side of the cheek. With this method, we could cover a maximum diameter of 4cm facial defect. Conclusion: In conclusion, it is suggested that V-Y-S flap is a useful method to cover facial defects after the excision of a skin cancer.

• Journal of the Korean Vacuum Society
• /
• v.16 no.6
• /
• pp.489-495
• /
• 2007

The assembly of the main system of the KSTAR tokamak has been recently completed, and the preparation for the 1st plasma and test operations is progressed. The fueling system established for these purposes uses only one port placed at the opposite side of the pumping duct, and has a difficulty of attaining a uniform and fast supply of fuel particles to the plasma. At the base operation stage after finishing the test operation, the fueling system must be improved to provide a uniform fueling and a feed-back control in accordance with a high-density tokamak plasma maintained for a long period. As a part for understanding the points to be improved in the fueling system, a Monte Carlo simulation on the gas fueling into the tokamak plasma has been executed. After modeling the vacuum vessel and the plasma of quasi-D shapes as tori of rectangular cross-sections, the influences of the position and the number of the fueling inputs on the particle density distribution for a given pumping probability and mean free path were investigated.

• Environmental and Resource Economics Review
• /
• v.22 no.2
• /
• pp.393-410
• /
• 2013

We employ a threshold vector error correction models (TVECM) to investigate the nonlinear dynamic adjustment of gasoline prices in Korea. We consider 10 regional gasoline markets including Seoul, Busan, Daegu, Incheon, Kwangju, Daejeon, Ulsan, Kangwon, Chungbuk, Jeonbuk and construct 9 price differences against Seoul. We use the bootstrap procedure suggested by Hansen (1999) and generalized by Lo and Zivot (2001) to show that three-regime TVECM is suitable for our analysis. Results indicate the gasoline price adjustment processes are nonlinear. Our estimation shows that Seoul-Daejeon, Seoul-Daegu and Seoul-Ulsan have bigger transaction costs than other market pairs and thus gasoline prices of these three regional markets are lower than that of Seoul. Gasoline prices of the other 6 regional markets are close to Seoul's price. One interesting finding is that the transaction costs are not proportional to geographical distances. This implies that transportation costs are not the main factor of the transaction costs. The transaction costs may depends on the competition intensity of gasoline markets in supply side.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.27 no.1
• /
• pp.67-76
• /
• 2007

The conclusion of free Trade Agreement between South Korea and USA can become a serious threat to the Korean agriculture. On the strategic scheme the foodstuffs is the basis for protection of the state sovereignty. The Amur oblast of Russian Federation is region, which can supply South Korea cheap and good qualitative feeds. It means South Korea should create agricultural cooperation with the Amur oblast of Russian Federation with the purpose to begin organic agriculture in this area and it will help South Korea to counteract a quantitative attack on Korea from the side of american agricultural production. In the Amur oblast there are following fodder crops; Alfalfa, Smooth brome grass (gromus adonis L.), Siberian couch grass, Sudan pass, Colza rape (Brassica napus) and Amaranth (Avfranthus). In the same area also exist oatmeal, wheat, corn and barley, which is possible to use for feeds. All these above written cultures are cultivated organically, therefore it is possible to use them as organic forages in South Korea. It is very important to know system of crop rotation in the Amur oblast. There is a scheme of crop rotation, which is connected with increase and preservation of fertility of soil, maintenance of growth of productivity of agricultural cultures and reception of high-quality production. It is necessary to begin organic agriculture in a southern part of Amur oblast, where, in 2001 year, 97% of all sowing areas was concentrated. The acidity degree of soil in this part is not high ($ph5.1{\sim}5.5$), therefore does not require liming.