• 한국재료학회지
• /
• 제23권6호
• /
• pp.309-315
• /
• 2013

$GdBa_2Cu_3O_{7-y}$(Gd123) powders were synthesized by the solid-state reaction method using $Gd_2O_3$ (99.9% purity), $BaCO_3$ (99.75%) and CuO (99.9%) powders. The synthesized Gd123 powder and the Gd123 powder with $Gd_2O_3$ addition ($Gd_{1.5}Ba_2Cu_3O_{7-y}$(Gd1.5)) were used as raw powders for the fabrication of Gd123 bulk superconductors. The Gd123 and Gd1.5 bulk superconductors were fabricated by sintering or a top-seeded melt growth (TSMG) process. The superconducting transition temperature ($T_{c,onset}$) of the sintered Gd123 was 93 K and the transition width was as large as 20 K. The $T_{c,onset}$ of the TSMG processed Gd123 was 82 K and the transition width was also as large as 12 K. The critical current density ($J_c$) at 77 K and 0 T of the sintered Gd123 and TSMG processed Gd123 were as low as a few hundreds A/$cm^2$. The addition of 0.25 mole $Gd_2O_3$ and 1 wt.% $CeO_2$ to Gd123 enhanced the $T_c$, $J_c$ and magnetic flux density (H) of the TSMG processed Gd123 sample owing to the formation of the superconducting phase with high flux pinning capability. The $T_c$ of the TSMG processed Gd1.5 was 92 K and the transition width was 1 K. The $J_cs$ at 77 K (0 T and 2 T) were $3.2{\times}10^4\;A/cm^2$ and $2.5{\times}10^4\;A/cm^2$, respectively. The H at 77 K of the TSMG-processed Gd1.5 was 1.96 kG, which is 54% of the applied magnetic field (3.45 kG).

• Progress in Superconductivity
• /
• 제12권1호
• /
• pp.32-35
• /
• 2010

Potassium doped $BaFe_2As_2$ superconducting thin films by using an ex situ pulsed laser deposition technique were fabricated in various conditions to find out an optimal growth condition. Controlled conditions were annealing temperature, annealing time, and mass of potassium. The $Ba_{1-x}K_xFe_2As_2$ thin films which has most good quality is fabricated at a condition of annealing temperature at $700^{\circ}C$, annealing time of 60 minutes, and 0.6 g of potassium lumps. In this condition we were able to fabricate good quality films with high transition temperature of ~ 39 K.

• 한국초전도ㆍ저온공학회논문지
• /
• 제26권2호
• /
• pp.9-18
• /
• 2024

The current study deals with the possible interplay between superconductivity and spin density wave in two band model high temperature iron based superconductor (FeBSC) Ba_1-xNa_xFe₂As₂. The electron and hole bands in the presence of the inter-band interaction between the two bands is becoming a vital issue to deal with the high temperature physics of the iron-based superconductors. In this research work, a model Hamiltonian appropriate for the system under consideration has been developed and the temperature dependent Green's function technique has been employed to get the solution for the equations of motion constructed for the two band model high temperature FeBSC Ba_1-xNa_xFe₂As₂. By making use of the decoupling procedure, the equations of motion for the dependence of superconducting transition temperature (T_C) on spin density wave(SDW) order parameter (Δ_SDW) in the electron intra-band (Δ_sc(e)) , hole intra-band (Δ_sc(h)) and inter-band (Δ_sc(eh)) for Ba_1-xNa_xFe₂As₂ have been obtained. We have also obtained the expression for the dependence of spin density wave transition temperature(T_SDW) on Δ_SDW for Ba_1-xNa_xFe₂As₂. Using some plausible approximations and appropriate experimental values for the parameters in the obtained equations of motion, phase diagrams of T_C versus Δ_sc(e), Δ_sc(h) and Δ_sc(eh) are plotted. Furthermore, a phase diagram of T_SDW versus Δ_SDW is plotted for the material under consideration. Finally, using the above mentioned phase diagrams, the interplay between superconductivity and spin density wave in the two band model high temperature FeBSC Ba_1-xNa_xFe₂As₂ has been demonstrated to be a very distinct possibility. The agreement of the current finding with the experimental observations is quite commendable.

• Progress in Superconductivity
• /
• 제12권1호
• /
• pp.41-45
• /
• 2010

Low temperature micro-calorimeters have been employed in the field of high resolution alpha spectrometers. These alpha detectors typically consist of a superconducting or metal absorber and a temperature sensor. The temperature sensor can be a transition edge sensor (TES), a metallic magnetic calorimeter (MMC) or other low temperature detectors for an accurate measurement of temperature change due to an alpha particle absorption. We report a recent study of the heat flow between a replaceable absorber and a temperature sensor. A piece of gold foil in $2.4{\times}2.7{\times}0.03\;mm^3$ is used as an absorber. A $40\;{\mu}m$ diameter Au:Er paramagnetic sensor is attached to another small piece of gold foil in $400{\times}200{\times}30\;{\mu}m^3$ to serve as the temperature sensor. This sensor assembly, Au:Er and gold foil, is placed on a miniature SQUID susceptometer in a gradiometric configuration. The thermal connection between the absorber and the sensor was made with three gold bonding wires. The measured thermal conductance shows a linear dependence to the temperature. The values are in a good agreement with Wiedemann-Franz type thermal conductance of the gold wires.

• 한국결정성장학회지
• /
• 제9권2호
• /
• pp.137-140
• /
• 1999

Flux법에 의해 성장된 $Bi_2Sr_2CaCu_2O_{8+{\delta}}(Bi2212)$ 단결정의 초전도 특성에 미치는 열처리 및 불순물의 영향을 자화측정에 의해 조사하였다. 초전도 특성은 불순물인 Mg와 Al의 영향을 받음을 알 수 있었으며, 초전도 전이온도(T,) 는 Mg 불순물의 영향에 의해 보다 낮아졌다. 그러나 성장된 결정은 열처리에 의해 초전도 특성이 개선됨을 알 수 있었 으며, 특히 MgO 도가니 사용에 의해 성장된 결정이 $Al_2O_3$ 도가니에 비해서 반자계특성이 현저하게 증가되었다. 반자계 특성의 개선효과에 의해 Mg 불순물은 초전도 특성 열화의 주요 요소라고 생각될 수 없음을 알 수 있었다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제15권3호
• /
• pp.5-8
• /
• 2013

We have studied Hall effect for potassium (K)-doped $BaFe_2As_2$ superconducting thin films by analyzing the relation between the longitudinal resistivity (${\rho}_{xx}$) and the Hall resistivity (${\rho}_{xy}$). The thin films used in this study were fabricated on $Al_2O_3$ (000l) substrates by using an ex-situ pulsed laser deposition (PLD) technique under a high-vacuum condition of ~$10^{-6}$ Torr. The samples showed the high superconducting transition temperatures ($T_c$) of ~ 40 K. The ${\rho}_{xx}$ and the ${\rho}_{xy}$ for K-doped $BaFe_2As_2$ thin films were measured by using a physical property measurement system (PPMS) with a temperature sweep (T-sweep) mode at an applied current density of $100A/cm^2$ and at magnetic fields from 0 up to 9 T. We report the T-sweep results of the ${\rho}_{xx}$and the ${\rho}_{xy}$ to investigate Hall scaling behavior on the basis of the relation of ${\rho}_{xy}={A{\rho}_{xx}}^{\beta}$. The ${\beta}$ values are $3.0{\pm}0.2$ in the c-axis-oriented K-doped $BaFe_2As_2$ thin films, whereas the thin films with various oriented-directions like a polycrystal showed slightly lower ${\beta}$ than that of c-axis-oriented thin films. Interestingly, the ${\beta}$ value is decreased with increasing magnetic fields.

• 한국초전도ㆍ저온공학회논문지
• /
• 제18권4호
• /
• pp.15-20
• /
• 2016

The effects of electron beam (EB) irradiation on the superconducting critical temperature ($T_c$) and critical current density ($J_c$) of YBCO films were studied. The YBCO thin films were irradiated using a KAERI EB accelerator with an energy of 0.2 MeV and a dose of $10^{15}-10^{16}e/cm^2$. A small $T_c$ decrease and a broad superconducting transition were observed as the EB dose increased. The value of $J_cs$ (at 20 K, 50 K and 70 K) increased at doses of $7.5{\times}10^{15}$ and $2.2{\times}10^{16}e/cm^2$. However, $J_cs$ decreased as the dose increased further. The X-ray diffraction (XRD) analysis showed that the c axis of YBCO was elongated and the full width at half maximum (FWHM) increased as the dose increased, which is strong evidence of the atomic displacement by EB irradiation. The transmission electron microscopy (TEM) showed that the amorphous layer formed in the vicinity of the surfaces of the irradiated films. The amorphous phase was often present as an isolated form in the interior of the films. In addition to the formation of the amorphous phase, many striations running along the a-b direction of YBCO were observed. The high magnification lattice image showed that the striations were stacking faults. The enhancement of $J_c$ by EB irradiation is likely to be due to the lattice distortion and the formation of defects such as vacancies and stacking faults. The decrease in $J_c$ at a high EB dose is attributed to the extension of the amorphous region of a non-superconducting phase.

• 한국초전도ㆍ저온공학회논문지
• /
• 제18권1호
• /
• pp.37-40
• /
• 2016

We have investigated the addition effect of NiO magnetic nanoparticles on crystal structure, microstructure as well as superconducting properties of $MgB_2$. NiO-added $MgB_2$ samples were prepared by the solid-state reaction method. The superconducting transition temperature ($T_c$) of 37.91 K was obtained for pure $MgB_2$, and $T_c$ was found to decrease systematically on increasing the addition level of NiO. X-ray diffraction (XRD) analysis revealed that no substitution of Ni for Mg in the lattice of $MgB_2$ was occurred. The microstructural analysis shows that the pure $MgB_2$ sample consists of plate shape $MgB_2$ grains, and the grains get refined to smaller size with the addition of NiO nanoparticles. At 5 K, high values of critical current density ($J_c$) were obtained for small amount NiO-added $MgB_2$ samples as compared to pure sample. The enhancement in $J_c$ could be attributed to the refinement of $MgB_2$ grains which leads to high density of grain boundaries in NiO-added $MgB_2$ samples.

• Progress in Superconductivity
• /
• 제11권1호
• /
• pp.72-77
• /
• 2009

Low temperature scanning laser microscopy (LTSLM) can be used for a two-dimensional display of bolometric response arising from the localized excitation of a sample by the focused laser beam. In this study, the distribution of critical temperature ($T_c$) and critical current density ($J_c$) in YBCO coated conductor were analyzed using LTSLM. For improving the temperature stability, we have modified the system into a double-shielding type. Through the modification, the temperature stability was successfully improved from ${\pm}10mK\;to\;{\pm}2mK$. The superconducting properties of YBCO coated conductors were measured for the sample of a narrow bridge type using wet etching process. The spatial non-uniformity of the ac voltage response, ${\delta}V(x)$, which is proportional to ${\partial}\rho(x,J_B)/{\partial}T$ in the transition temperature region could be observed and displayed in a two-dimensional image.

• Progress in Superconductivity
• /
• 제9권1호
• /
• pp.80-84
• /
• 2007

Charcoal was used as a carbon source for improving the critical current density of $MgB_2$ and the effect of annealing temperature on the $J_c$ of $MgB_2$ was investigated. The charcoal powder used in this study was $1{\sim}2$ microns in size and was prepared by wet attrition milling. $MgB_2$ bulk samples with a nominal composition of $Mg(B_{0.95}C_{0.05})_2$ were prepared by in situ process of Mg and B powders. The powder mixture was uniaxially compacted into pellets and heat treated at temperatures of $650^{\circ}C\;-\;1000^{\circ}C$ for 30 minutes in flowing Ar gas. It was found that superconducting transition temperature of $Mg(B_{0.95}C_{0.05})_2$ decreased by charcoal additions which indicates the carbon substitution for boron site. $J_c$ of $Mg(B_{0.95}C_{0.05})_2$ was lower than that of the undoped $MgB_2$ at the magnetic fields smaller than 4 Tesla, while it was higher than that of the undoped sample especially at the magnetic field higher than 4 T. High temperature annealing seems to be effective in increasing $J_c$ due to the enhanced carbon diffusion into boron sites.