• 대한토목학회논문집
• /
• 제44권1호
• /
• pp.11-17
• /
• 2024

제진 구조는 댐퍼라는 장치를 구조물에 장착시켜 지진에너지를 소산하는 내진설계이다. 지진피해를 저감하고자 하는 연구가 성행하고 있는 가운데 제진 구조는 댐퍼의 재료, 형상을 변경함으로써 기술을 발전시켜왔다. 하지만 댐퍼의 특성상 에너지를 소산하기 위해 재료에 발생하는 소성변형은 피할 수 없는 한계가 있다. 따라서 본 연구에서는 발생한 변형를 스스로 회복할 수 있는 초탄성 형상기억합금(Superelastic shape memory alloy, SSMA)을 활용하여 반영구적으로 사용할 수 있고 추가적인 긴장력을 적용하여 구조적 성능을 향상한 장수명 댐퍼를 제안하였다. 장수명 댐퍼의 거동 특성 분석을 위해 재료, 와이어 직경, 긴장력 유무의 설계 변수에 따라 유한요소해석을 진행하였고 응답 거동을 도출하여 하중 저항, 에너지 소산, 잔류변위 등의 특성을 분석하여 장수명 댐퍼의 성능적 우수성을 입증하였다.

• Design & Manufacturing
• /
• 제2권5호
• /
• pp.39-42
• /
• 2008

The Paper discussed the effects of working electric current and pulse when using super hardend alloy drill as corona electrode. The discharge effect can be obtained very precisely in the ranges of 1A - 2A in working current. $12{\mu}s-14{\mu}s$ in dis charge pulse on time width and $8{\mu}s-10{\mu}s$ in discharge pulse off time.

• Journal of Welding and Joining
• /
• 제35권1호
• /
• pp.49-54
• /
• 2017

In this study, the volumetric heat source in electron beam welding (EBW) is modeled through finite element method taking advantage of ABAQUS software package. Since this welding method is being applied in plates with different thicknesses and also considering that residual stresses reduce the strength of these weldments, the effect of thickness in the distribution and magnitude of residual stresses after welding is studied. Regarding the vast application of Inconel 706 super-alloy in aerospace industries, this material was selected in the current research. In order to validate the finite element model, the obtained results were compared to those of other researchers in this area, and good agreement was observed. The simulation results revealed that increase in the plate thickness leads to increase in the residual stresses. In addition heat treatment in the base metal (before welding) increases the residual stresses significantly.

• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 2002년도 학술대회 논문집
• /
• pp.144-148
• /
• 2002

Influences of bending strain on the critical current (I$_{c}$) were investigated in Bi-2223 superconducting tapes at 77K. The effect of bending mode on the I$_{c}$ degradation behavior was discussed in viewpoints of test method, n-value and damage morphology. Especially, in this paper, we reported the I$_{c}$ behavior in Ag alloy/Bi-2223 multifilamentary super- conducting tapes under bending occurred within width x length plane of the tape which was called as a hard bending.nding.

• 한국공간구조학회논문집
• /
• 제20권3호
• /
• pp.53-61
• /
• 2020

This paper presents a systematic numerical analysis to obtain the re-centering and energy dissipation capacities of Chevron braced steel frames subjected to seismic loadings. In order to develop a recentering seismic resistance system excluding a residual deformation, the chevron braced steel frames are assembled using super-elastic SMA (Shape Memory Alloy) braces. The three-dimensional nonlinear finite element models are constructed to investigate the horizontal stiffness, hysteretic behaviors, and failure modes of the re-centering Chevron bracing system.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2010년도 임시총회 및 하계학술연구발표회
• /
• pp.148-150
• /
• 2010

Two-layered ferromagnetic alloy films ($Ni_{80}Fe_{20}$, $Co_{90}Fe_{10}$) with a Conetic intermediate soft magnetic layer of different thickness were investigated to correlate the coercivity values and magnetization process with the strength of the hard saturation field. The interpretation of strong, medium and weak coupling is proposed.

• 한국초전도ㆍ저온공학회논문지
• /
• 제2권2호
• /
• pp.15-19
• /
• 2000

The stability of variable cross-sectional area HTS current lead is considered. The cross-sectional area is varied to have a constant safety factor which is defined as the ratio of operating current and critical current of superconductor. As the constant area HTS lead, the variable cross-sectional area HTS lead also has three steady states above the bifurcation point and only one steady state below the bifurcation point. The temperature profiles and current sharing ratios for each steady state are calculated. The heat dissipation into cryogenic system for super-conducting, intermediate, and upper states are compared. For Bi-2333 sheathed with silver-gold alloy 2m length of current lead, and the maximum temperature of upper state seems to be burn-out free below 5m length.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1994년도 추계학술대회 논문집
• /
• pp.150-155
• /
• 1994

종래의 초내열합금은 원자력산업과 우주항공산업등에 주로 사용되었으며, 산업이 고도화되어짐에 따라 각종 산업기계와 자동차 분야에까지 광범위하게 사용되어지고 있다. 대표적인 초내열합금으로서의 인코넬(Inconel)은 인성과 Creep 특성이 우수하고, 특히 고온강도가 높고 화학적으로도 안정하여 부식에도 강한 장점을 지니고 있어 항공기 부품재료로서 최근 각광을 받고 있다. 본 연구에서는 일반적으로 사용되어지고 공구재종인 코팅초경합금공구와 세라믹 공구를 사용하여 초내열합금인 인코넬 600을 절삭가공하여, 절삭저항,공구의 파손 및 마모,칩의 용착현상등의 가공성에 영향을 주는 요인에 대하여 검토함으로써, 공구의 종류에 대ㄷ응하는 적절한 절삭영역을 설정하는 것을 목적으로 하였다.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.708-709
• /
• 2006

New Al-based alloys with very high ultimate tensile strength were developed in high Al concentration range of 91-95 at.% for Al-Fe-Cr-Ti-M (M: Co and Mo) systems and Al-Fe-Cr-Mo-Ti-Co system by the dispersion of nanoscale quasicrystalline particles in Al phase. The effect of adding elements, M was discussed in the viewpoint of stability of super-cooled liquid state and formation ability of quasicrystalline phase. The P/M Al-Fe-Cr-Ti-M alloys with dispersed nanoscale quasicrystalline particles exhibited ultimate tensile strength of 350MPa at 573K and 200MPa at 673K.

• 한국세라믹학회지
• /
• 제55권5호
• /
• pp.452-460
• /
• 2018

This study investigate changes in mechanical behaviors such as indentation load-displacement and hardness of thermal barrier coatings (TBCs) using cycling of thermal shock test. Relatively dense and porous TBCs on nickel-based bondcoat/super alloy are prepared using different starting granules, 204C-NS and 204NS commercial powers, and the effect of double layers of 204C-NS on 204NS and 204NS on 204C-NS are investigated. The highest temperature applied during thermal shock test is $1100^{\circ}C$ and the maximum number of cycles is 1,200. The results indicate that bilayered TBC showed a relatively mechanically resistant property during thermal shock cycles and that the mechanical behavior is influenced by the microstructure of TBCs by exposure to high temperature during tests or different starting granules.