• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1998.04a
• /
• pp.64-68
• /
• 1998

본 연구의 목적은 수도권 지하철차량의 소음과 진동에 방음차륜(또는 탄성차륜)이 어느 정도의 효과를 가져오는가를 평가하기 위한 것이다. 실차시험을 통하여 일체차륜이 장착된 차량과 방음차륜이 장착된 차량의 차내소음 및 차체진동을 비교하여 보았다. 그 결과 방음차륜은 지하철차량의 소음과 진동에 효과가 있음을 알 수 있었다. 그러나 실제 적용은 소음과 진동 이외에도 여러 가지 측면에서의 검토가 이루어져야만 가능할 것이다.

• Proceedings of the KSR Conference
• /
• 1998.05a
• /
• pp.265-272
• /
• 1998

In this paper, the intoner noise reduction for subway railroad vehicles was studied by improving transmission loss of carbody panels and side doors, and on-line tests were conducted to examine the exterior noise levels at various running conditions. Also the transmission loss for design candidates of the carbody specimen was measured in two reverberation rooms. From the results of the tests, side door gap is the most dominant factor affecting the Interior noise level of subway railroad cars with a sliding typed side door. The next one is revealed to transmission loss of a floor panel. To improve the transmission loss of the carbody, many activities were conducted such as, treatment of resilient and sound-absorbing materials and reducing the gap of the side door by adopting a brush and rubber, etc. The estimated interior noise level for modified car which is designed with improved carbody panels is lower than original car by about 5㏈.

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.1852-1857
• /
• 2007

Since the introduction of the subway, remarkable progress has been made so as to be able to produce a Korean standard electric car, but it is rather regretful that an engineer who is not aware of laws on a railroad or involved in a railroad designed a electric car. In the future, the electric cars with up-to-date technology must be introduced, but there are many difficulties in such introduction. For example, the operation of simultaneously moving and running scores of subway trains must comply with Regulation on Railroad Train Operation, so, close examination of these problems is required. The existing electric car, as does a motorcar, varies a little with makers in the type and characteristics. This paper is intended to discuss about the device and measures for reinforcing a function of Daewoo GEC electric car that was introduced by technical tie-up from England, which accounts for the most ratio in this field

• Proceedings of the KSR Conference
• /
• 1999.11a
• /
• pp.487-494
• /
• 1999

The object of this study is to reduce the subway noise by the low noise wheel. The vibro-acoustic reduction was predicted from the FRF difference between low noise wheel and solid wheel by experimental modal analysis. The low noise wheel and solid wheel were compared in viewpoint of car interior/exterior noise. The effect of low noise wheel on the noise of subway train of 6 vehicles was obtained. But, the application of low noise wheel must be reviewed in some aspect.

• Particle and aerosol research
• /
• v.11 no.1
• /
• pp.21-28
• /
• 2015

In this study, the flow around a subway train running in an underground tunnel was numerically estimated. For the validation of the numerical results, the airflow velocity at a point underneath a subway train was measured using an ultrasonic anemometer. Then, the trajectories of particles generated at the contact points between the wheels and rails were numerically predicted. By considering the airflow velocity and particle trajectories, the space underneath the T-Car (trailer car) was expected to be appropriate for the room for the installation of a dust-removal system.

• Proceedings of the KSR Conference
• /
• 2006.11b
• /
• pp.695-700
• /
• 2006

Kimhae light subway started complete unmanned operation electromotive car starting construction. It stepped on the first step which approaches at time of the unmanned operation electromotive car there is a possibility of doing. During the 30 years, the electromotive car market of domestic developed. Finally we will start into a plan and a production for the initial commerce operation. The Canada unmanned operation electromotive car which we are advancing, It means becomes the good example in the relation technical experts

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.11
• /
• pp.1193-1197
• /
• 2005

The low frequency noise below 200 Hz, including inaudible infra-sound, is known to affect human physiology ; circulation, respiration, nerve, endocrine, etc. Legislation has been introduced in several countries regarding evaluation guideline and measurement method of low frequency noise. In this work, low frequency characteristics of the Seoul subway transportation system was investigated in terms of the noise level and spectrum in the interior of running passenger car and the subway station. The interior sound pressure level of the passenger car was between 60 and 105 dB in the frequency range of $1{\sim}200\;Hz$ and varied with car speed. The marked sound pressure level peak at 8 Hz, infra-sound, observed for the most of Lines is shown to correspond to the resonance frequency of passenger car. The level of station platform noise was lower than the interior noise of running car because of the lower speed at arriving/departure. The results indicated that the interior noise level of running passenger car was inside the oppressive feeling region, proposed by Ochiai, in the frequency range of $20{\sim}80\;Hz$ which makes a little concern.

• Proceedings of the KSR Conference
• /
• 2006.11b
• /
• pp.941-946
• /
• 2006

It followed in system development and SMRT(Seoul Metropolitan Rapid Transit Co)System reached to an automatic train operation(ATO) and driverless operation(DLM) from the manual operation due to the train driver. The train like the general bus or the car vehicle was not serial riding in a car and the Parallel concept which the numerous passenger rides in a car simultaneously occur frequently the charge of the train driver unmanned bitterly from existing manual handling was a possibility of doing, train open door control(ODM) which bites also ATO, it handles it minimized. Like this ATO/DLM, the control system which bites being a Wayside to Train communication for immediacy, it is a system of the Vital concept the immediacy of the citizen Data evil the radio information transmission and the train of the interface which is accurate from unmanned operation and, will decipher, will accomplish it will guarantee. It respects the passenger accident prevention and an air question environment improvement from subway platform and phul leys the screen door of Platform(PSD) with the fire tube frost it refers and part it treats and to sleep it does, ODM which bites is accuracy and immediacy of altitude and when seeing from the viewpoint which demands the trust of altitude, ODM system the trust of car incest interface in the equipment construction which is safe and the comparative analysis back of the system analysis against the control which bites and case study and other subway system it leads from the research which it sees and signal - train in base grudge to sleep it contributes it does.

• Tribology and Lubricants
• /
• v.30 no.6
• /
• pp.364-369
• /
• 2014

To assess the wear behavior of rails against subway rail car wheels, we investigate the sliding wear behavior of pins derived from two types of rails (normal rails and heat-treated rails) against a disc derived from a subway rail car wheel, using a pin-on-disc-type tribometer. We base the sliding wear test conditions on the sliding conditions for wheel flange-rail gauge corner contact. We demonstrate the remarkable transition in the wear behavior of the pins derived from the rails, from severe wear to mild wear, as a function of the sliding distance. The wear rate of the heat-treated rail material in the running-in wear region is much lower than that of the normal rail material. Furthermore, the wear rates of the pins in the running-in wear region decrease with increasing hardness and with decreasing sliding speed. However, there is little difference between the heat-treated rail pin and the normal rail pin in the wear rate in the steady-state wear region. Stricter controls on the decarburized layer beneath the surface of rails are required to reduce the wear rate in the running-in wear region.

• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.1378-1387
• /
• 2011

Seoul Metropolitan Rapid Transit Corporation - which is operating the subway lines No. 5, 6, 7 and 8 of Seoul's subway - has been operating a variety of motor cars and rail inspection vehicles to transport workers and materials into the tunnel at night after the daily revenue service for the maintenance of tunnel structure and track. However, the air quality in tunnels has been contaminated due to the operation of diesel engine cars, and rail inspection vehicles are now having higher chances of risks since the lightweight vehicles made with aluminum bogie became too obsolete. In this study, MRT type eco-friendly electric multi-inspection car has been elaborated for the purpose of improvement of tunnel environment and replacement of motor cars and rail inspection vehicles.