• Proceedings of the Optical Society of Korea Conference
• /
• 1989.02a
• /
• pp.225-229
• /
• 1989

Taking the normal mode transmission direction perpendicular to the substrate, an alternative equivalent network formulation is developed for the analysis of optical strip waveguides. All kinds of mode couplings between the normal modes are included in this formulation. Compared to the previous equivalent network formulations, the calculations are simplified especially when the thickness of the uniform slab is thin enough such that no well guided modes are available along the uniform slab waveguide.

• The Korean Journal of Mycology
• /
• v.36 no.1
• /
• pp.26-30
• /
• 2008

This study was carried out to develop artificial culture method of Grifola frondosa in polypropylene bag. To find out the favorable substrate formulation of G. frondosa, physicochemical conditions were investigated. The T2 formulation (55 : 25 : 12 : 8) mixing ratio of oak sawdust, oak chip, dried bean-curd refuse and wheat bran showed the shortest time to complete the crop cycle and the highest yield (weight of fresh mushrooms harvested at maturity). Those physicochemical conditions were pH 4.3, 2.4% crude fat contents, 54.1% total carbon, 1.42% total nitrogen, 38.1 C/N ratio, 75.5% porosity and $0.21\;g/cm^3$ bulk density. Among the physicochemical factors, pH, crude fat and total nitrogen may affect mushroom yield. Therefore, development of favorable substrate would be benefit to increase production efficiency of G. frondosa, mushrooms and be commercial potential.

• Korean Journal of Agricultural Science
• /
• v.37 no.2
• /
• pp.191-197
• /
• 2010

The objective of this research was to determine the influence of the physical and chemical properties of root substrates used during the production of 'Maehyang' strawberry propaguleson the growth of the mother plants and the rate of daughter plant formation. Plants were cultured in plastic bags containing six different formulations of root substrates composed of: a) 50% coir dust and 50% perlite (5:5 by volume, A), b) 60% coir dust and 40% perlite (6:4, B), c) 70% coir dust and 30% perlite (7:3, C), d) 70% coir dust and 30% coconut chip (7:3 D), e) 60% coir dust and 40% coconut chip (60:40, E), or f) 50% sphagnum peat and 50% vermiculite (50:50, F). All media formulations contained a moderate level of base fertilizers. Physical and chemical properties of each formulation were determined before plant establishment and after 120 days of stock plant culture and runner production. Total porosity (TP) and container capacity (CC) of all substrate formulations were higher than 85% and 55%, respectively, allowing a suitable range of air and water holding characteristics. Formulation F provided the highest TP and CC values among the all substrate modifications evaluated. Substrate formulations A, B, C and F had higher electrical conductivity (EC) and $NO_3{^-}$-N concentrations than formulations D and E, when determined before and after plant culture. Formulations A, B, C, and F, having higher EC readings, also performed better as root substrates thanthe formulations D and E in increasing fresh and dry weights of the runners as well as the production of daughter plants per plant. The 'Maehyang' strawberry plants grown in the formulation F had the highest tissue N content, followed by those grown in substrate B, A, C, or D for 120 days after transplanting. Formulation F also facilitated accumulation of higher tissue phosphorus (P) and copper (Cu) contents compared to other treatments. Results of this experiment suggest that the chemical properties, rather than physical properties, of root substrates had a major influence on the growth of mother plants and the occurrence of healthy daughter plants during the bag-culture phase of propagation.

• Journal of Mushroom
• /
• v.12 no.4
• /
• pp.275-279
• /
• 2014

Pleurotus pulmonarius usually grows on the dead wood of deciduous trees from mid summer to early fall. Cultivation of this mushroom is recently increasing due to its good flavour and fragrance. This study was conducted to find out the favorable substrate formulation in the bottle and bag cultivation of P. pulmonarius. The V formulation (10 : 50 : 20 : 20 mixing ratio of poplar sawdust, cottonseed hull, cottonseed meal and beet pulp) showed the fastest mycelial growth in the test tube column medium and highest yields in both bottle cultivation and bag cultivation. Those chemical conditions were pH 5.52, 29.07% organic matter contents, 1.12% total nitrogen, 25.95 OM/N ratio, 0.16% CaO, 0.51% $K_2O$, 0.17 MgO and 0.26 $P_2O_5$.

• Transactions of Materials Processing
• /
• v.12 no.8
• /
• pp.730-737
• /
• 2003

Extensive studies have been conducted for reducing the residual stresses and birefringence in injection-molded optical disk substrate Flow-induced and thermally-induced stresses and birefringence have been found as two main sources during injection molding process. However, high speed rotation also induces extra stresses and birefringence in real operation of disk drives. In the present paper rotation-induced in-plane birefringence has been measured and presented for CD and DVD substrates at different radial position. About 10 - 15 nm of extra retardation in one pass has been measured up to 4,800 rpm. The distribution of extra rotation-induced birefringence will be valuable data for designing an optimal optical disk substrate. Finally, experimental results were compared with the extra stresses calculated from simple formulation.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.40 no.5
• /
• pp.187-196
• /
• 2003

Effects of Airgap and anisotropy substrate on input impedance and radiation pattern of rectangular microstrip patch antenna are studied in terms of an integral equation formulation. The input impedance and radiation pattern of microstrip patch antenna is investigated by using Galerkin's moment method in solving the integral equation. Sinusoidal functions are selected as basis functions, which resemble in the actual standing wave on the Patch. From the numerical results, the variation of input impedance and radiation patterns in the variation of air gap thickness, anisotropy ratio of substrate, and relative permittivity of anisotropy substrate are presented.

• Proceedings of the IEEK Conference
• /
• 2000.07a
• /
• pp.175-178
• /
• 2000

The resonance characteristic of microstrip antenna with an airgap between the substrate layer and ground plane is investigated. The study is performed by using a rigorous Green’s function formulation in the spectral domain and Galerkin’s moment method calculation. The numerical convergence using sinusoidal basis functions, the unknown surface current distribution in the rectangular patch, is discussed. Numerical result for the effects of airgap and patch length on the complex resonant frequencies of the rectangular microstrip structure are also presented

• Journal of the Korean Vacuum Society
• /
• v.9 no.1
• /
• pp.60-68
• /
• 2000

The optical constants ($E_g^d$, n, K) of the polycrystalline CdSe thin films deposited on the glass substrate by the electron-beam evaporation technique are determined over 400~2,500 nm photon wavelengths. In order to explain the variation of the optical contents with film thickness and substrate temperatures, the surface microstructural parameter are investigated by AFM (atomic forced microscope( images for the films deposited by different growth conditions. It is shown that the variations of optical constants are close related to changes of the surface morphology of the CdSe thin films. The decrease in the band gap with film thickness is connected with quantum size effects due to increase of the grain size. The refractive index of CdSe films decrease with increasing the grain size of the films, and the dispersion of the refractive index followed a single oscillator model according to the Sellmeier formulation.

• Journal of Mushroom
• /
• v.19 no.3
• /
• pp.160-165
• /
• 2021

This study was conducted to investigate a suitable substrate formulation for bag cultivation of Hypsizygus marmoreus. To determine the optimum media composition for H. marmoreus, chemical properties of various media and culture properties were investigated. The fastest primordia formation (9.0 days), the shortest fruiting body harvest period (18.0 days), and the highest yield (144.7 g/bag) were realized with the T6 formulation (55:15:20:5:5 mixing ratio of poplar sawdust, wheat bran, rice bran, dried soybean powder, and palm kernel, respectively). The chemical properties of the T6 formulation were pH, 6.0; total carbon, 19.0%; total nitrogen, 0.83%; C/N ratio, 22.8; P₂O₅, 0.61%; K₂O, 0.46%; and MgO, 0.29%. This is the first attempt using plastic bags for cultivation and will help expand the production of H. marmoreus.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08b
• /
• pp.1121-1124
• /
• 2007

Ink jet printing has been targeted as a key technology for OLED, TFT backplane and other organic semiconductor device fabrication. This presentation will concentrate on aspects of the IJ process, formulation design, jetting performance, interaction with the substrate and resultant printed device performance.