• 한국정보통신설비학회:학술대회논문집
• /
• 2008.08a
• /
• pp.287-291
• /
• 2008

DWDM(dense wavelength division multiplexing)-PON technology is applied to subscriber network as the same as E-PON or G-PON. And its network components consist of OLT, ONU and RN. Legacy DWDM technologies have been applied on the long-haul part of optical network due to its excessive high cost. But many researchers have successfully devised a few methods which can considerably reduce the cost of equipment. Nowadays DWDM-PON equipment's has arrived to a level having a competitive price in comparison to E-PON or G-PON on condition of giving equal bandwidth. Recently a major domestic ISP has deployed DWDM-PON equipments in one apartment complex area in the purpose of satisfying ever-increasing bandwidth demand. The ISP increased data transmission capacity from 1 G to 16G without any additional fiber deployment. In this paper we introduce roughly three technologies of implementing DWDM-PON's optic module and related optic devices. And we also describe pre-test of vendor's DWDM-PON equipment and discuss the result. Lastly we propose some of network configurations which adopt DWDM-PON technology. By adopting DWDM-PON technology ISP can greatly save the cost of deploying broadband subscriber network.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.9
• /
• pp.1666-1674
• /
• 2008

In this paper, various forms of technical methods as well as comparison analysis on constructing optical subscriber network were studied to find the most economical installation method in the future. Comparison analysis has been focused on the three popular types of optical subscriber networks in Korea, such as VDSL2, Ethernet-LAN and FTTH-R. A study is conducted on the initial installation investment per subscriber, equipment failure rate as well as power consumption per subscriber. As a results, FTTH-R network will be the most economical method in the future, but a gradual switch which undergoes a UTP-fiber hybrid method as the midway process is preferable in considering the existing installed copper UTP subscriber cables.

• The Transactions of the Korea Information Processing Society
• /
• v.5 no.4
• /
• pp.1014-1024
• /
• 1998

This paper describes the implementation of the asymmetric digital subscriber lines(ADSL) interface device function in ATM networks. The function of the ADSL interface devices has been achieved within a type of the ATM switch standard board. The board connected with the ADSL modem process the ATM physical layer function of data transfering asymmetrically. For the implementation of the board, we have modeled a worst case of the subscriber line conditions from the existing investigated results on the impairments such as crosstalk, impulse noise, and some important noises loaded to subscrber line. Also we have performed assessment tests in the full test environments. We have found that the board is met to the standard specification in condition with various test loops and the worst line conditions using an ADLS line simulator. And we confirmed that high-speed multimedia services are performed well with the ATM switch and the ADSL subscriber line. It is evaluted that this board can be used for high quality ADSL services through existed copper subscriber line.

• Journal of Internet Computing and Services
• /
• v.5 no.3
• /
• pp.87-98
• /
• 2004

There are several types of distributed subscribers network using Asymmetric Digital Subscriber Line (ADSL), Very high-bit rate Digital Subscriber Line (VDSL), and Data Over Cable Service Interface Specifications (DOCSIS), The efficient and concentrated network management of those several distributed subscribers networks and resources require the general information model of network, which has abstract and conceptional managed objects independent of type of network and its equipment to manage the integrated subscriber network, This paper presents the general Internet subscribers network modeling framework using RM-ODP (Reference Model Open Distributed Processing) to manage that network In the form of integrated hierarchy, This paper adopts the object-oriented development methodology with UML (Unified Modeling Language) and designs and implements the HFC network of DOCSIS as an example of the subscriber network.

• Information and Communications Magazine
• /
• v.15 no.7
• /
• pp.75-94
• /
• 1998

In this paper, HFC CATV networks are introduced. HFC CATV networks are currently considered as a most effective and plausible solution for subscriber access networks in the information superhighway, among others such as ADSL and B-WLL. The advantages of HFC CATV networks include its broad upstream and downstream channel bandwidths, much wider than PSTN's and its readiness. The HFC CATV networks are already well spread among the general subscribers in Korea. This fact will shorten the installation period and significantly reduce its cost. In addition, The structure and channel environment of the HFC CATV networks are introduced. At the same time, in this paper included are major problems in the HFC CATV networks and the solutions for these problems. Also discussed are data transmission, medium access control, IEEE802.14, and MCNS for standardizations. Moreover, additional telecommunications service activities in both Korea and other countries, using HFC CATV networks are also included. The topics which are covered in detail are the ones such as interoperation between HFC CATV networks and trunk line and the digital transmission performance test for the CATV networks. In the performance test, it is concluded that HFC CATV networks can satisfy the QoS for various additional services if the number of the subscribers in a cell is limited to less than 500 and other minor requirements are satisfied. Based on all these discussions and conclusions, HFC CATV networks are suggested in this paper for the subscriber access networks of the so called information superhighway.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.10a
• /
• pp.138-141
• /
• 2001

Recently, xDSL(x Digital Subscriber Line) service has got more and more interest not only in Korea but also all around the world. Many of telecom service companies around the world began to supply ADSL service, a kind of xDSL. And VDSL has been emerging as the next-generation technology of this ADSL. VDSL is very hish bit rate digital subscriber line and the fastest service of xDSL. VDSL is enough to service IP Multicasting, VoD, Broadcast video and etc. which become more important. In this paper we'd like to help making most suitable situation of Internet service by designing this VDSL networks architecture.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.3
• /
• pp.547-556
• /
• 1997

In this paper we suggest a dynamic quota allocation mechansim for B-ISDN(Broadband Integrated Services Digital Network) subscriber networks. The quota adaptation decision based on the number of cells in the transmission queue is made distributively by each node in the ring network. This mechanism provides both fairness and efficiency for it enables each node to adapt its quota under asymmetric traffic condition. The simulation results show that substantial improvements in access delay time and throughput can be achieved with this algorithm.

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.9 no.2
• /
• pp.56-67
• /
• 2010

Optical fiber subscriber receive communication system is a core technology of multimedia home networks because it provides the high-level quality of data and services. This paper executes an analysis and research on this communication systems and presents the theoretical background for the purpose of understanding the optical communication system principal and explaining signal process flows to divide each block for the implementing ASIC design.

• IE interfaces
• /
• v.18 no.3
• /
• pp.277-287
• /
• 2005

In this paper, we deal with a new techno-economic modeling and analysis for optical access networks. In deploying the fiber-to-the-home (FTTH) architecture, network planner needs to consider the following techno-economic issues: when do we need to upgrade existing local access network to FTTH network? how much do we invest to maximize profit? In order to answer these techno-economic questions, we need to consider the impact of emerging technologies and business environment. Toward this end, we develop a new techno-economic modeling to deal with the inherent complexity of technology evolution and cost economics. In particular, the new modeling approach provides us with an techno-economic analysis of technology alternatives such as ethernet passive optical network (E-PON) and wavelength division multiplex passive optical network (WDM-PON). In this analysis, we focus on the impact of critical factors such as the cost characteristic of proposed architecture and digital subscriber line (DSL) subscriber's churn-in to FTTH service and churn-out. We develop mixed integer-programming models for finding the evolution path of local access networks to broadband network architectures.

• The KIPS Transactions:PartC
• /
• v.12C no.5 s.101
• /
• pp.709-716
• /
• 2005

QoS is an important requirement of the FTTH (Fiber To The Home) subscriber in access network using E-PON (Ethernet Passive Optical Network). In this research, we describe the structure of the access network and propose a bandwidth guarantee scheme for subscriber and service according to the requirements of the subscriber, service and system. This scheme uses two kinds of the classification table, which are called 'service classification table' and 'subscriber classification table.' Using the classification table, we can identify the flow of the subscriber and service. Also, we compute the number of hash table entry to minimize the loss ratio of flows using the M/G/k/k queueing model. Finally, we apply the DRR scheduling through virtual queueing per subscriber instead of the aggregated class.