• Journal of information and communication convergence engineering
• /
• v.18 no.3
• /
• pp.155-161
• /
• 2020

The fifth generation (5G) is a state-of-the-art mobile communication access technology that uses sub 6 GHz bands and mmWave. Presently, the 5G network is partially deployed along with 4G in areas with dense traffic. In the future, the demand for the 5G bandwidth may increase. Thus, it is necessary to study the coexistence between the 5G and radio systems using adjacent or same channels to eliminate the interference between radio systems and efficiently utilize the frequency. This paper analyzed the impact of 5G new radio downlink on the fixed-satellite service earth station operating at the co-channel and adjacent channel in the upper 3.7 GHz band using the Spectrum Engineering Advanced Monte Carlo Analysis Tool, which is based on the Monte Carlo method. The results of this paper can be utilized for planning the frequency allocation of 5G networks; they can also be used as a guideline for deploying 5G base stations around a fixed-satellite service earth station.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.12 s.91
• /
• pp.1199-1206
• /
• 2004

In this paper, we analyzed the orthogonal MC DS-CDMA system and no-overlapping MC DS-CDMA System, which were divided by the normalized spacing between adjacent subcarrier over Nakagami-m fading channels. In order to reduce the number of selective paths occurring in the MC system, the Hybrid SCMRC technique was applied, which was compared with the case when the MRC technique was used. As a result of simulations, it was found that the Hybrid SC/MRC method could be replaced by the MRC method and if the number of subcarriers was increased when the given bandwidth was fixed, the interval between subcarriers increased and bigger bandwidths were required. an, the number or subcarriers should be selected in consideration or given bandwidth.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2005.11a
• /
• pp.220-221
• /
• 2005

Sub-bottom profiler(SBP) has been used extensively for the mapping of basement in the foundation design of offshore structure, for pre- and post-dredging operations within harbors and channels, for selection of pipeline routes, sitting of drilling platforms, and in the exploration for an aggregates such as sands and gravels. During the construction of Siwha embankment for irrigation water and the expansion of arable land, the breaking of an embankment unfortunately occurred so that a lot of riprap was swept away and widely dispersed by the tide and strong current. The feasibility study for the construction of the tidal-powered electric plant in Siwha embankment was performed quite recently. Therefore we made use of SBP survey to investigate the distribution of the lost riprap. We could successfully map out the distribution of the lost riprap from the reflection amplitude characteristics of the sediments in SBP data set. We demonstrated the variation of reflection amplitude versus the sediments with and/or without riprap by means of the numerical modeling of acoustic wave equation using finite difference method. Also we examined an amplitude anomaly of the ripraped area through the physical modeling using ultrasonic.

• Journal of Korea Foundry Society
• /
• v.38 no.3
• /
• pp.60-65
• /
• 2018

In the present study, the characteristics of Mg inverter cases for hybrid cars are investigated. Concerns over the use of lightweight materials to reduce energy use and to mitigate emission problems are inevitable in the twenty-first century. Magnesium is a promising material for the manufacturing of lightweight parts. Several cases for thermal cooling channels have been designed and simulated, and the effects of materials and coatings on the thermal cooling efficiency have been discussed. The effects of the coating thickness on heat extraction in an Mg inverter housing case using the PEO (plasma electrolyte oxidation) coating method were also discussed. In order to produce an inverter case by the diecasting process, the filling sequence and cooling behavior during the diecasting process were simulated. The optimized process conditions from the simulation result were then used in a trial diecasting experiment.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.1
• /
• pp.1-19
• /
• 2015

With the recent popularity of smart terminals, the demand for high-data-rate transmission is growing rapidly, which brings a new challenge for the traditional cellular networks. Both device-to-device (D2D) communication and small cells are effective to improve the transmission efficiency of local communication. In this paper, we apply D2D communication into a small cell network system (SNets) and study about the optimization problem of resource allocation for D2D communication. The optimization problem includes system scheduling and resource allocation, which is exponentially complex and the optimal solution is infeasible to achieve. Therefore, in this paper, the optimization problem is decomposed into several smaller problems and a hierarchical scheme is proposed to obtain the solution. The proposed hierarchical scheme consists of three steps: D2D communication groups formation, the estimation of sub-channels needed by each D2D communication group and specific resource allocation. From numerical simulation results, we find that the proposed resource allocation scheme is effective in improving the spectral efficiency and reducing the outage probability of D2D communication.

• Aerospace Engineering and Technology
• /
• v.8 no.2
• /
• pp.1-7
• /
• 2009

The Geostationary Ocean Color Imager (GOCI) is under development to provide a monitoring of ocean-color around the Korean Peninsula from geostationary platforms. It is planned to be loaded on Communication, Ocean, and Meteorological Satellite (COMS) of Korea. In this study, the radiometric model of GOCI, which is constructed based on the functional model of sub-system, is introduced. Non-linearity for each channel is analyzed in terms of linear gain and nonlinear gain by using the radiometric model. The non-linearity characteristic is validated by using test data which have been achieved during ground test at payload level. The non-linearity $G^3$/b shows identical characteristic for all channels.

• The Korean Journal of Nuclear Medicine
• /
• v.19 no.1
• /
• pp.145-148
• /
• 1985

A small number of pathologic entities such as Budd-Chiari Syndrome, cirrhosis, focal nodular hyperplasia, and superior and inferior vena cava obstruction has been reported to result in focal areas of increased uptake of radiocolloid on the hepatoscintigram. We recently studied a patient with focal accumulation of $^{99m}Tc-phytate$ at the inferior aspect of the liver, at the junction of the right and left lobe. The superior vena cava scintiangiogram was taken for the evaluation of the superior vena cava obstruction and collateral circulations. As a result of superior vena caval obstruction a considerable amount of blood flowed to the liver through the anterior parietal and periumblical venous channels. A certain fraction of radiocolloid delivered by the rete mirabile perfused to a localized area of the liver. This would explain the hot spot around the porta hepatis in this case.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.10a
• /
• pp.720-723
• /
• 2003

So far the study of digital home has mainly been made up of the network technology and the sorority system, but the application to consider the discriminatory characteristics of the individual family members has been interested in comparison with the necessity. The system proposed in this study is to get the information of the internal users through the access-controlling system. The controller offers the discriminatory environment by activating the database of the internal users and controls the sub-system of the home-network. The suggested system can automatically offer the discriminatory environment among the family members by limiting TV programs or channels according to the users' age, by offering other internet environment according to the users, by putting restrictions on telephone numbers, or by restricting the settling right of the home-shopping companies.

• Proceedings of the KIPE Conference
• /
• 2006.06a
• /
• pp.456-458
• /
• 2006

Power line communication: PLC which easy to install at anywhere near outlet for electric machine. PLC uses transmission line for voltage of which is 60 Hz. Signals don't affect to electric machine in PLC because they are very small voltage. One of the important thing is the processes of adding signal to power line and extracting the signal from power line, the other is to choose the strong modulation method which sends signals long distance without loosing in PLC channel. but PLC channel have very high and variable noise and attenuation and then it is very hard to transmit optimally between the transmitter and the receiver. After all, impedance and noise problems of PLC channel must be overcame. Noises of 2 kinds which are AWGN abd impulse noise and attenuation are orated. To overcome the noise. Recently, Multi-carrier Modulation: MCM methods like as OFDM and DMT which are divide the channel into many sub-channel have been studied. those are powerful communication methods in PLC. In this paper, PLC channels made up of 3 numbers of noise and attenuation are simulated for getting BER by Matlab simulink.

• Transactions on Electrical and Electronic Materials
• /
• v.7 no.2
• /
• pp.53-57
• /
• 2006

In this paper, a Symmetric Dual-gate Single-Si TFT, which includes three split floating n+ zones, is simulated. This structure drastically reduces the kink-effect and improves the on-current. This is due to the separated floating n+ zones, the transistor channel region is split into four zones with different lengths defined by a floating n+ region. This structure allows effective reduction in the kink-effect, depending on thy length of the two sub-channels. The on-current of the proposed dual-gate structure is 0.9 mA, while that of the conventional dual-gate structure is 0.5 mA, at both 12 V drain and 7 V gate voltages. This result shows an 80% enhancement in on-current. In addition, the reduction of electric field in the channel region compared to a conventional single-gate TFT and the reduction of the output conductance in the saturation region, is observed. In addition, the reduction in hole concentration, in the channel region, in order for effectively reducing the kink-effect, is also confirmed.