• 한국전기전자재료학회논문지
• /
• 제17권2호
• /
• pp.171-177
• /
• 2004

Voltage step-down characteristics in Ring/Dot type piezoelectric transformer were examined as a function of the area of input electrode when the area of output electrode is fixed. The effects of driving frequency and load resistance on the voltage step-down characteristics were also examined. Voltage gain was greatly dependent on the driving frequency and load resistance, and showed a maximum gain at resonance frequency of the step-down transformer. The frequency where the maximum cutout voltage appears increased about 0.2％ as the load resistance increased from 10 to 150 Ω. As the area of input electrode increased, the voltage gain and the efficiency of the transformer increased. Frequency dependence of efficiency of the step-down transformer revealed a similar tendency with the voltage gain curves. The maximum efficiency remarked 94% when the input voltage and the load resistance were 20 Vpp and 120 Ω, respectively.

• 한국환경과학회지
• /
• 제30권10호
• /
• pp.845-861
• /
• 2021

This study investigated the variations in monthly PM_2.5 concentrations and their characteristics at the sampling site (35.075°N, 129.080°E) around the Busan seaport area for six months (from August 2020 to January 2021). Monthly PM_2.5 concentrations in the filtered samples ranged from 8.4 to 42.3 ㎍/m³ (average=19.6±8.2 ㎍/m³, n=50) and were generally high in August, December, and January, and low in September, October, and November. The variations of monthly PM_2.5 concentrations showed similar patterns to those of the neighboring national air quality monitoring sites. The contents of Total Carbon (TC), Organic Carbon (OC), Elemental Carbon (EC), and OC/EC ratios in PM_2.5 showed large variability during the study period. The OC/EC ratios ranged from 4.2 to 34.4, suggesting that the relative contributions of OC and EC to the PM_2.5 concentrations changed temporally and might be related to their formation sources. Variations in the chemical components of and particle size distributions in PM_2.5 showed that high PM_2.5 concentrations were affected by various sources, such as sea salt and ship emission. The precursor gas concentrations were discussed in terms of monthly variations and their contributions to PM_2.5 concentrations. However, further research is needed to understand the characteristics and behaviors of PM_2.5 concentrations around the Busan seaport area.

• 천문학회보
• /
• 제39권1호
• /
• pp.76.1-76.1
• /
• 2014

We investigate the solar flare and CME occurrence rate and probability depending on sunspot class and its area change. These CMEs are front-side, partial and full halo CMEs associated with X-ray flares. For this we use the Solar Region Summary(SRS) from NOAA, NGDC flare catalog, and SOHO/LASCO CME catalog for 16 years (from January 1996 to December 2011). We classify each sunspot class into two sub-groups: "Large" and "Small". In addition, for each class, we classify it into three sub-groups according to sunspot class area change: "Decrease", "Steady", and "Increase". In terms of sunspot class area, the solar flare and CME occurrence probabilities noticeably increase at compact and large sunspot groups (e.g., 'Fkc'). In terms of sunspot area change, solar flare and CME occurrence probabilities for the "Increase" sub-groups are noticeably higher than those for the other sub-groups. For example, in case of the (M+X)-class flares of 'Dkc' class, the flare occurrence probability of the "Increase" sub-group is three times higher than that of the "Steady" sub-group. In case of the 'Eai' class, the CME occurrence probability of the "Increase" sub-groups is five time higher than that of the "Steady" sub-group. Our results demonstrate statistically that magnetic flux and its emergence enhance solar flare and CME occurrence, especially for compact and large sunspot groups.

• Nuclear Engineering and Technology
• /
• 제52권11호
• /
• pp.2471-2478
• /
• 2020

Pumps are essential machinery in the various industries. With the development of high-speed and large-scale pumps, especially high energy density, high requirements have been imposed on the vibration and noise performance of pumps, and cavitation is an important source of vibration and noise excitation in pumps, so it is necessary to improve pumps cavitation performance. The modern pump optimization design method mainly adopts parameterization and artificial intelligence coupling optimization, which requires direct correlation between geometric parameters and pump performance. The existing cavitation performance calculation method is difficult to be integrated into multi-objective automatic coupling optimization. Therefore, a fast prediction method for pump cavitation performance is urgently needed. This paper proposes a novel cavitation prediction method based on impeller pressure isosurface at single-phase media. When the cavitation occurs, the area of pressure isosurface S_iso increases linearly with the NPSH_a decrease. This demonstrates that with the development of cavitation, the variation law of the head with the NPSH_a and the variation law of the head with the area of pressure isosurface are consistent. Therefore, the area of pressure isosurface S_iso can be used to predict cavitation performance. For a certain impeller blade, since the area ratio R_s is proportional to the area of pressure isosurface S_iso, the cavitation performance can be predicted by the R_s. In this paper, a new cavitation performance prediction method is proposed, and the feasibility of this method is demonstrated in combination with experiments, which will greatly accelerate the pump hydraulic optimization design.

• Composites Research
• /
• 제36권6호
• /
• pp.402-407
• /
• 2023

Activated carbon fibers (ACFs) are fibrous form of activated carbon (AC) with higher mechanical strength and flexibility, which make them suitable for building modules for applications including directional gas flow such as air and gas purification. Similarly, ACFs are anticipated to excel in the efficient capture of CO₂. However, due to the difficulties in fabricating monofilament carbon fibers at a laboratory scale, most of the studies regarding ACFs for CO₂ capture have relied on electrospun carbon fibers. In this study, we fabricated monofilament carbon fibers from PAN-based monofilament precursors by stabilization and carbonization. Then, ACFs were successfully prepared by chemical activation using KOH. Different weight ratios ranging from 1:1 to 1:4 were employed in the fabrication of ACFs, and the samples were designated as ACF-1 to ACF-4, respectively. As a function of KOH ratio, increase in surface area could be observed. However, the CO₂ adsorption trend did not follow the surface area trend, and the ACF-3 with second largest surface area exhibited the highest CO₂ adsorption capacity. To understand the phenomena, nitrogen content and ultramicropore distribution, which are important factors determining CO₂ adsorption capacity, were considered. As a result, while nitrogen content could not explain the phenomena, ultramicropore distribution could provide a reasoning that the excessive etching led ACF-4 to develop micropore structure with a broader distribution, resulting in high surface area yet deteriorated CO₂ adsorption.

• 대한원격탐사학회지
• /
• 제37권3호
• /
• pp.657-664
• /
• 2021

본 연구에서는 수도권 지역의 대기오염물질(PM_2.5, PM₁₀, O₃) 농도와 지형 고도, 건물 면적비, 인구 밀도의 상관성을 조사하였다. 지형 고도와 건물 면적비를 분석하기 위해 국토지리정보원에서 제공하는 수치지형도를 이용하였고, 건물 면적비를 계산하기 위해 수도권 지역을 TM 중부원점을 기준으로 수평 9 km × 9 km 격자로 구분하였다. 인구 밀도는 국가통계포털의 행정구역별 면적과 인구수 자료를 이용하였다. 대기오염물질 농도 자료는 수도권에 위치한 도시대기측정소 146개 지점의 PM_2.5, PM₁₀, O₃ 농도 측정 자료를 이용하였다. 분석 기간은 2010년 1월부터 2020년 12월까지이고, 1시간 평균 농도 자료를 이용하여 월평균 농도를 계산하였다. 지형 고도는 경기도 북부와 동부 지역에서 높았고 서해안에 근접할수록 낮았다. 건물 면적비와 인구밀도 분포는 서로 유사하였고, 서울특별시에서 가장 높았으며, 산악과 해안지역에서는 낮게 나타났다. 월평균 PM_2.5과 PM₁₀ 농도는 봄철과 겨울철(1월~3월)에 높았고 O₃ 농도는 늦봄부터 초여름(4~6월)까지 높았다. 농도가 높은 3개월에 대해서 AMQS 지점별 평균 농도를 비교·분석하였다. 건물면적비나 인구밀도와 대기오염물질 농도 사이에는 음의 상관 관계가 분석되었다(인구밀도와 PM_2.5, PM₁₀ 농도 사이는 약한 음의 상관관계가, O₃ 농도와는 비교적 강한 음의 상관관계). 반면, 대기오염물질 농도와 도시대기측정소 측정 고도 사이의 뚜렷한 상관성을 나타나지 않았는데, 향후, 이에 대한 연구 수행이 필요할 것으로 판단된다.

• 실내환경 및 냄새 학회지
• /
• 제16권3호
• /
• pp.277-286
• /
• 2017

The objectives of this study were to investigate the effects of $PM_{10}$ and $O_3$ concentration on the symptoms of allergic diseases. The questionnaire was used to determine whether or not symptoms of allergic diseases were present from September to October 2012. The air pollution concentration data used was the corresponding point CEM (continuous emission monitoring) data. The average concentration of $PM_{10}$ was $56.09{\mu}g/m^3$ in the control area, and the concentration in the exposed area was $40.44{\mu}g/m^3$. In the two areas, concentration of $O_3$ was 28.73 ppb and 28.74 ppb, respectively. The total average concentrations of $PM_{10}$ and $O_3$ were $45.66{\mu}g/m^3$ and 28.73 ppb in the Gwangyang area. The rate of asthma diagnosis was higher in the control area (9.6%) than in the exposed area (4.1%), but the rate of allergy eye disease was higher in the exposed area (23.9%) than in the control area (16.5%). There was a significant difference in the symptoms of some allergic diseases when the relative concentration of $PM_{10}$ and $O_3$ were high and low.

• 한국환경과학회지
• /
• 제33권6호
• /
• pp.355-365
• /
• 2024

This study was conducted to investigate the effects of CO₂ supplement on growth and quality in greenhouse lettuce cultivation. When CO₂ was supplied at 1,500 ppm in lettuce cultivation, overall growth parameters such as number of leaves, leaf area, plant length, fresh weight, and dry weight were superior compared to those of the control group. While there was no significant difference in relative growth rate due to CO₂ supplement, an increase in leaf area index was observed with CO₂ usage. Furthermore, although there was no significant difference in the content of water-soluble vitamins such as Vitamin C, B1, B2, B5, and B6 due to CO₂ supplement, the Vitamin B3 content in the CO₂ treatment group was 0.5 mg/kg higher than in the control group. Therefore, the use of CO₂ in lettuce cultivation resulted in increased yield and promoted growth, enabling early harvesting.

• 센서학회지
• /
• 제30권3호
• /
• pp.139-147
• /
• 2021

Numerical analysis was performed using FIMMWAVE to optimize the specifications of Si₃N₄/SiO₂ slot and ridge-slot optical waveguides based on confinement factor and effective mode area. The optimized specifications were confirmed based on sensitivity in terms of the refractive index of the analyte. The specifications of the slot optical waveguide, i.e., the width of the slot and the width and height of the rails, were optimized to 0.2 ㎛, 0.46 ㎛, and 0.5 ㎛ respectively. When the wavelength was 1.55 ㎛ and the refractive index of the slot was 1.3, the confinement factor and effective mode area of 0.2024 and 2.04 ㎛², respectively, were obtained based on the optimized specifications. The thickness of the ridge and the refractive index of the slot were set to 0.04 ㎛ and 1.1, respectively, to optimize the ridge-slot optical waveguide, and the confinement factor and effective mode area were calculated as 0.1393 and 2.90 ㎛², respectively. When the confinement coefficient and detection degree of the two structures were compared in the range of 1 to 1.3 of the analyte index, it was observed that the confinement coefficient and sensitivity were higher in the ridge-slot optical waveguide in the region with a refractive index less than 1.133, but the reverse situation occurred in the other region. Therefore, in the implementation of the integrated optical biochemical sensor, it is possible to propose a selection criterion for the two parameters depending on the value of the refractive index of the analyte.

• 한국환경보건학회지
• /
• 제50권3호
• /
• pp.191-200
• /
• 2024

Background: Busan is a rapidly industrializing city with many mixed residential and industrial areas. Fine dust emissions from mobile pollution sources such as ships and vehicles are particularly high in Busan. Objectives: This study analyzed the spatial distribution of air pollutants over the past three years and identified the impact of air pollutants through mobile source data in Busan. Methods: We obtained air pollutant data on fine particulate matter (PM₁₀), ultrafine particulate matter (PM_2.5), nitrogen dioxide (NO₂), sulfurous acid gas (SO₂), and ozone (O₃) for the last three years (source: airkorea.or.kr) and analyzed the spatial distribution using SAS 9.4 and Surfer 23. For the mobile pollutant data, we used CCTV data from major intersections in Busan to identify truck and car traffic, and visualized traffic density with QGIS. Results: The analysis of the concentration of air pollutants over three years (2020~2022) showed that all were lower than the annual environmental standards with the exception of PM_2.5. PM₁₀ and PM_2.5 were found to be highly concentrated in the western part of the area, while NO₂ was high in the port area of Busan and SO₂ was high in the western part of the area and near the new port of Busan. In the case of O₃, it was high in the eastern part of the city. The traffic volume of freight vehicles by intersection was concentrated in the West Busan area, and the traffic volume for all cars was also confirmed to be concentrated at "Mandeok Intersection" located in the West Busan area. Conclusions: This study was conducted to determine the relationship between air pollutants emitted from motor vehicles and the distribution of air pollutants in Busan. The spatial distribution of PM₁₀ and PM_2.5 correlates with traffic volume, while high concentrations of SO₂ and NO₂ near the port are associated with ship emissions.