• 한국산학기술학회논문지
• /
• 제18권4호
• /
• pp.8-14
• /
• 2017

전기 장비와 같은 비구조적 요소는 다양한 제반 시설에서 적절한 기능을 수행하는 중요한 역할을 한다. 특정 시설에서 이러한 비구조적 요소 중 일부는 강한 지진 발생이 발생한다고 하더라고 계속적으로 작동해야 한다. 그러나 다양한 이유 중 지진 진동의 불확실성과 전기 장비와 같은 비구조적 요소의 다양성 때문에 지진 진동의 영향으로 인한 각 기계적 손상과 작동 상의 손상을 정의하는 것과 시스템 손상 확률을 결정하는 것은 어려운 일이다. 따라서 비구조적 요소의 특성과 지진의 변화를 고려한 전기 장비의 성능 평가를 위한, 실용이고 효과적인 확률 모델을 개발할 필요가 있다. 이 연구는 비구조적 요소의 동적 거동과 비구조적 요소를 구조물에 구속 시키는 구속 장치의 선형 거동 및 비선형 거동에 대한 이해를 향상 시킬 것이다. 또한, 이 연구는 폭넓고 새로운 지진 강도를 위한 구속된 비구조적 요소의 확률론적 내진 응답 모델을 생성할 것이다.

• Computers and Concrete
• /
• 제27권2호
• /
• pp.163-173
• /
• 2021

In this paper, the parameters of haunch height, reinforcement ratio and site condition were evaluated for the influence on the seismic performance of a composite precast fabricated utility tunnel by shaking table test and numerical simulation. The dynamic response laws of acceleration, interlayer displacement and steel strain under unidirectional horizontal seismic excitation were analyzed through four specimens with a similarity ratio of 1:6 in the test. And a numerical model was established and analyzed by the finite element software ABAQUS based on the structure of utility tunnel. The results indicated that composite precast fabricated utility tunnel with the good anti-seismic performance. In a certain range, increasing the height of haunch or the ratio of reinforcement could reduce the influence of seismic wave on the utility tunnel structure, which was beneficial to the structure earthquake resistance. The clay field containing the interlayer of liquefied sandy soil has a certain damping effect on the structure of the utility tunnel, and the displacement response could be reduced by 14.1%. Under the excitation of strong earthquake, the reinforcement strain at the side wall upper end and haunches of the utility tunnel was the biggest, which is the key part of the structure. The experimental results were in good agreement with the fitting results, and the results could provide a reference value for the anti-seismic design and application of composite precast fabricated utility tunnel.

• Geomechanics and Engineering
• /
• 제27권5호
• /
• pp.465-479
• /
• 2021

One of the important causes of building and infrastructure failure, such as bridges on pile foundations, is the placement of the piles in liquefiable soil that can become unstable under seismic loads. Therefore, the overarching aim of this study is to investigate the seismic behavior of a soil-pile system in liquefiable soil using three-dimensional numerical FEM analysis, including soil-pile interaction. Effective parameters on concrete pile response, involving the pile diameter, pile length, soil type, and base acceleration, were considered in the framework of finite element non-linear dynamic analysis. The constitutive model of soil was considered as elasto-plastic kinematic-isotropic hardening. First, the finite element model was verified by comparing the variations on the pile response with the measured data from the centrifuge tests, and there was a strong agreement between the numerical and experimental results. Totally 64 non-linear time-history analyses were conducted, and the responses were investigated in terms of the lateral displacement of the pile, the effect of the base acceleration in the pile behavior, the bending moment distribution in the pile body, and the pore pressure. The numerical analysis results demonstrated that the relationship between the pile lateral displacement and the maximum base acceleration is non-linear. Furthermore, increasing the pile diameter results in an increase in the passive pressure of the soil. Also, piles with small and big diameters are subjected to yielding under bending and shear states, respectively. It is concluded that an effective stress-based ground response analysis should be conducted when there is a liquefaction condition in order to determine the maximum bending moment and shear force generated within the pile.

• 한국지진공학회논문집
• /
• 제27권5호
• /
• pp.203-211
• /
• 2023

For fast-built and safe precast concrete (PC) construction, the dry mechanical splicing method is a critical technique that enables a self-sustaining system (SSS) during construction with no temporary support and minimizes onsite jobs. However, due to limited experimental evidence, traditional wet splicing methods are still dominantly adopted in the domestic precast industry. For PC beam-column connections, the current design code requires achieving emulative connection performances and corresponding structural integrity to be comparable with typical reinforced concrete (RC) systems with monolithic connections. To this end, this study conducted the standard material tests on mechanical splices to check their satisfactory performance as the Type 2 mechanical splice specified in the ACI 318 code. Two PC beam-column connection specimens with dry mechanical splices and an RC control specimen as the special moment frame were subsequently fabricated and tested under lateral reversed cyclic loadings. Test results showed that the seismic performances of all the PC specimens were fully comparable to the RC specimen in terms of strength, stiffness, energy dissipation, drift capacity, and failure mode, and their hysteresis responses showed a mitigated pinching effect compared to the control RC specimen. The seismic performances of the PC and RC specimens were evaluated quantitatively based on the ACI 374 report, and it appeared that all the test specimens fully satisfied the seismic performance criteria as a code-compliant special moment frame system.

• Earthquakes and Structures
• /
• 제22권5호
• /
• pp.461-473
• /
• 2022

Energy-saving block and invisible multiribbed frame composite wall (EBIMFCW) is an important shear wall, which is composed of energy-saving blocks, steel bars and concrete. This paper conducted seismic performance tests on six 1/2-scale EBIMFCW specimens, analyzed their failure process under horizontal reciprocating load, and studied the effect of axial compression ratio on the wall's hysteresis curve and skeleton curve, ductility, energy dissipation capacity, stiffness degradation, bearing capacity degradation. A formula for calculating the peak bearing capacity of such walls was proposed. Results showed that the EBIMFCW had experienced a long time deformation from cracking to failure and exhibited signs of failure. The three seismic fortification lines of the energy-saving block, internal multiribbed frame, and outer multiribbed frame sequentially played important roles. With the increase in axial compression ratio, the peak bearing capacity and ductility of the wall increased, whereas the initial stiffness decreased. The change in axial compression ratio had a small effect on the energy dissipation capacity of the wall. In the early stage of loading, the influence of axial compression ratio on wall stiffness and strength degradation was unremarkable. In the later stage of loading, the stiffness and strength degradation of walls with high axial compression ratio were low. The displacement ductility coefficients of the wall under vertical pressure were more than 3.0 indicating that this wall type has good deformation ability. The limit values of elastic displacement angle under weak earthquake and elastic-plastic displacement angle under strong earthquake of the EBIMFCW were1/800 and 1/80, respectively.

• 대기
• /
• 제33권5호
• /
• pp.561-570
• /
• 2023

In order to improve the predictability of marine high-impacts weather such as typhoon and high waves, the marine observation network is an essential because it could be rapidly changed by strong air-sea interaction. In this regard, the National Institute of Meteorological Sciences, Korea Meteorological Administration (NIMS/KMA) has promoted the Argo float observation program since 2001 to participate in the International Argo program. In this study, current status and future direction of the NIMS/KMA Argo program are presented through the internal meeting and external expert forum. To date, a total of 264 Argo floats have been deployed into the offshore around the Korean Peninsula and the Northwestern Pacific Ocean. The real-time and delayed modes quality control (QC) system of Argo data was developed, and an official regional data assembling center (call-sign 'KM') was run. In 2002, the Argo homepage was established for the systematic management and dissemination of Argo data for domestic and international users. The future goal of the NIMS/KMA Argo program is to improve response to the marine high-impacts weather through a marine environment monitoring and observing system. The promotion strategy for this is divided into four areas: strengthening policy communication, developing observation strategies, promoting utilization research, and activating international cooperation.

• Earthquakes and Structures
• /
• 제26권5호
• /
• pp.383-400
• /
• 2024

For a conventionally repaired frame-supported-transfer-slab (FSTS) reinforced concrete (RC) structure, both the transfer slab and the beam-to-column and transfer slab-to-column joints remain vulnerable to secondary earthquakes. Aimed at improving the seismic performance of a damaged FSTS RC structure, an innovative retrofitting scheme is proposed, which adopts the sector lead rubber dampers (SLRDs) at joints after the damaged FSTS RC structure is repaired by conventional approaches. In this paper, a series of quasi-static cyclic tests was conducted on a large-scale retrofitted FSTS RC structure. The seismic performance was evaluated and the key test results, including deformation characteristics, damage pattern, hysteretic behaviour, bearing capacity and strains on key components, were reported in detail. The test results indicated that the SLRDs started to dissipate energy under the service level earthquake, and thus prevented damages on the beam-to-column and transfer slab-to-column joints during the secondary earthquakes and shifted the plastic hinges away from the beam ends. The retrofitting scheme of using SLRDs also achieved the seismic design concept of 'strong joint, weak component'. The FSTS RC structure retrofitted by the SLRDs could recover more than 85% bearing capacity of its undamaged counterpart. The hysteresis curves were featured by the inverse "S" shape, indicating good bearing capacity and hysteresis performance. The deformation capacity of the damaged FSTS RC structure retrofitted by the SLRDs met the corresponding codified requirements for the case of the maximum considered earthquake, as set out in the Chinese seismic design code. The stability of the FSTS RC structure retrofitted by the SLRDs, which was revealed by the developed stains of the RC frame and transfer slab, was improved compared with the undamaged FSTS RC structure.

• 한국지구과학회지
• /
• 제35권1호
• /
• pp.54-68
• /
• 2014

서울을 포함한 수도권지역의 지표면 특성분석을 위하여 Landsat 위성자료(Landsat 5, Landsat 7, Landsat 8)를 이용하여 다양한 지표 특성지수와 지표면 온도를 계산하였다. 연구에 사용된 Landsat 자료는 가을철 자료로써 1985년 10월 21일의 Landsat 5, 2003년 9월 29일의 Landsat 7 그리고 2013년 9월 1일의 Landsat 8 자료를 이용하였다. 그리고 서울과 주변지역에 대하여 토양조절 식생지수, 수정 정규 습윤지수, 정규 습윤지수, 태슬 모자형 밝기, 태슬 모자형 초록, 태슬 모자형 습윤, 정규 식생지수, 정규 건설지수와 같은 지표 특성지수와 지표면 온도를 산출하였다. 대부분의 지표 특성지수들은 도시, 시골, 산, 건물, 강 그리고 도로 등에서 잘 구별되었다. 특히, 도시화의 특징은 서울 주변의 신도시(예, 일산)에서 잘 나타났다. 정규 식생지수와 정규 건물지수 그리고 지표면 온도에 따르면 도시의 확장은 서울의 주변지역에서 뚜렷이 보였다. 지표면 온도와 지표고도는 식생 또는 건설물의 구조와 분포를 나타내는 정규 식생지수 그리고 정규 건물지수와 강한 상관성이 나타났다. 정규 식생지수는 지표면온도와 양의 상관성을 보였고 지표고도와 음의 상관성을 가지는 반면, 정규 식생지수는 지표면온도와 지표고도에 대하여 각각 반대의 특성을 나타내었다. 또한, Landsat의 정규 식생지수와 정규 건물지수는 수도권지역에서 밀접한 관계를 보였다. Landsat 8과 Landsat 5에서는 -0.6 이하의 강한 상관성이 있었으며 Landsat 7에서는 -0.5 이상의 낮은 상관성이 나타났다.

• 한국지진공학회논문집
• /
• 제7권6호
• /
• pp.59-70
• /
• 2003

한반도 남동부에서 관측된 지진기록을 이용하여 스펙트럼 감쇠상수 $\chi$와 응력강하상수를 계산하였다. 특히, 스펙트럼 감쇠상수 $\chi$는 관측소별로 부지고유의 특성을 반영하여 새로운 방법으로 계산하였다. 이 방법은 2단계의 계산과정으로 구성된다. 첫 번째 단계에서는 코다(coda)파 정규화법을 이용하여 광역적 상수인 비탄성감쇠 Q를 역산하고, 이로부터 스펙트럼의 거리종속적인 감쇠효과를 일으키는 $\chi$$_{q}$값을 계산한다. 두 번째 단계에서는 앞서 계산된 $\chi$$_{q}$값을 관측소별로 동일하게 적용하여 거리와 무관한 스펙트럼 감쇠효과인 부지고유의 $\chi$$_{s}$값을 추정한다. 관측소에 관계없이 평균적으로 계산된 $\chi$값의 진원거리(R)에 따른 경향은 0.016+0.000157R이다. 응력강하상수는 1999년 경주근방에서 세 차례 발생한 지진의 관측자료를 이용하여 조남대와 박창업 방법으로 계산하였으며, 그 결과는 92-bar이다. 이들 상수를 이용하여 추계학적 모사법으로 한반도 남동부에서 발생 가능한 강지진동의 최대지반운동과 주파수에 따른 특성을 간접적으로 추정하였다. 이러한 추계학적 모사의 결과를 바탕으로 진원거리에 따른 지진동 감쇠공식을 유도하였으며 기존의 국내연구와 비교, 분석하였다.

• 터널과지하공간
• /
• 제24권5호
• /
• pp.354-365
• /
• 2014

2005년 3월 20일 규모 6.5의 후쿠오카 본진이 발생하였고 이후 발생한 규모 3.7 이상의 15 개 중규모 후쿠오카 지진으로부터 관측된 지반진동 파형을 이용하여 수평 응답스펙트럼을 분석하였다. 결과를 국내 원자력 관련 구조물의 내진설계 기준과 국내 일반 구조물 및 건축물 내진설계기준과 각각 비교하였다. 수평성분 178개 지반진동을 이용하여 고유진동수별 지반응답을 구하고 최대 지반 가속도 값을 이용하여 정규화 분석을 수행하였다. 연구결과는 응답값에 대한 진앙거리 의존성이 대단히 크다는 것을 보여주었다. 또한 국내 원자력시설물의 내진기준인 Regulatory Guide 1.60과 비교한 결과는 일부 구간 즉 약 8 ~ 10 Hz 구간과 약 16 ~ 20 Hz의 2개의 구간에서 표준편차를 더한 값이 Regulatory Guide 1.60 보다 약간 초과함을 보여 주었다. 또한 국내 일반 구조물 및 건축물 내진설계 응답스펙트럼을 3 개 지반조건에 적용한 결과는 거의 모든 주기 대역에서 분석된 응답스펙트럼이 SE 지반조건의 설계 응답스펙트럼(500년 재래주기, 지진구역 1, SE 지반조건)을 초과하고 있다. 500년 재래주기는 가장 약한 내진 설계기준에 해당하기 때문에 거의 모든 주기 대역에서 본 연구로부터 분석된 응답스펙트럼이 해당 기준을 초과하고 있다. 신뢰성을 보다 증가시키기 위해 향후 한반도 및 한반도 주변 해외 발생지진으로부터 관측된 지진자료를 대폭적으로 보강하여 관측 지진자료의 다양성을 유지하는 것이 필요하다.