• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.1132-1137
• /
• 2010

There are execute of new laws about prevent of earthquake diaster in nation because of some increments of big earthquake occurence frequency. Now develope new composit plate by ductile fiber with strong mechanic materials, which compose of strengthening systems for the underground structures subject to forced displacements. This study is to focus to develop the retrofitting system for the cut and cuver tunnels built without earthquake type load scenario, so that it can provide the safety of existing urban subway system against earthquakes.

• 한국지반공학회논문집
• /
• 제20권7호
• /
• pp.15-24
• /
• 2004

본 논문은 1994 Northridge 지진에 의해 발생된 주거건물손상에 관하여 건물 교체시의 가격에 대한 상대적 수리비용의 개념으로 GIS기반의 손상평가에 관하여 기술하였다. 빌딩손상은 164개의 서로 다른 지역에서 얻어진 지진기록으로부터 유도된 지진매개변수와 빌딩위치 및 안전조사보고서를 바탕으로 평가하였다. 본 논문은 가장 심한 건물피해를 받은 위치를 규명하는 인식 알고리즘이 GIS를 통하여 개발되었다. 이러한 알고리즘은 지진 후 신속한 응급조치와 위성으로부터 얻어진 데이터를 짧은 시간에 분석할 수 있는 프레임을 제공한다.

• Earthquakes and Structures
• /
• 제11권6호
• /
• pp.967-982
• /
• 2016

Current codes design the buildings based on life safety criteria. In a performance-based design (PBD) approach, decisions are made based on demands, such as target displacement and performance of structure in use. This type of design prevents loss of life but does not limit damages or maintain functionality. As a newly developed method, resilience-based design (RBD) aims to maintain functionality of buildings and provide liveable conditions after strong ground movement. In this paper, the seismic performance of plain and strengthened RC frames (an eight-story and two low-rise) is evaluated. In order to evaluate earthquake performance of the frames, the performance points of the frames are calculated by the capacity spectrum method (CSM) of ATC-40. This method estimates earthquake-induced deformation of an inelastic system using a reduced response spectrum. Finally, the seismic performances of the frames are evaluated and the results are compared with a resilience-based design criterion.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 1997년도 춘계 학술발표회 논문집 Proceedings of EESK Conference-Fall 1997
• /
• pp.233-240
• /
• 1997

Seven kinds of hysteric model were used and classified three groups considering the absorbing capacities of strain energy for each model. Four kids of each model. Four kinds of strong motion earthquake record (two of them were recorded in Japan and the others in U.S.A) are used. The yield strength of building was set in the ratio to the maximum input acceleration (Yield Strength / Maximum Acceleration = 0.5~3.0). Natural periods of structures were varied 0.1~3.0 second with an interval of 0.1 second. First group : Elastic-Plastic model, Ramberg-Osgood model Second group : Degrading Tri-liner model, Takeda model Third group : Slip model, Origin model, Max-D model Elastic-plastic response spectra were calculated for response velocities, displacement, energy input, ductility factors, accumulated ductility factors. The equivalent response values of M.D.O.F systems against S.D.O.F system were calculated to compare the relationship of two systems.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 1999년도 추계 학술발표회 논문집 Proceedings of EESK Conference-Fall
• /
• pp.162-169
• /
• 1999

Intentionally weakened girders near the beam-to-colum connection lead ductile failures at the weakened points prior to potential brittle failure at the connection points subjected to strong earthquake. Recent research investigated cyclic behavior of composite beams with a rectangular web opening and find out ductile failure of such beams due to plastic hinge formation of T-section at the four corners of the rectangular opening. But eventual failures of T-sections are resulted from local buckling of T-section having a narrow stem and a narrow bound of plastic hinge formation. This continuing research proposes double-circular opening instead of rectangular one in ofter to improve energy dissipation capacity as well as composite beam strength, Experimental test of two specimens was carried out and its results are compared with those of nonlinear finite element analyses

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 1999년도 춘계 학술발표회 논문집 Proceedings of EESK Conference-Spring
• /
• pp.35-40
• /
• 1999

In order to know the characteristics of attenuation of coda wave in the Kyungsang Sedimentary Basin quality factor for coda wave or coda Q is estimated from the earthquake data recorded in the KIGAM microearthquake network. The single scattering model for coda wave generation is adopted in estimating coda Q. Coda Q appears to be largely dependent on the normalized time(a) which is the ratio of elapsed time to S-wave travel time. In the present study coda Q(Qc) is estimated in the range of a=1.5-3.Q and expressed in terms of frequency(f). The deduced function in the range of 1 to 25 Hz is Qc=36.8283 f1.15095 to represent the strong dependence of coda Q on frequency. It is found that the difference of Qc between U-D N-S and E-W components is negligible, This face supports the back-scattering theory that coda were originates from scattered waves by randomly distributed heterogeneities in the crust. On the other hand it is observed that the coda Q increases with depth.

• Earthquakes and Structures
• /
• 제2권2호
• /
• pp.127-147
• /
• 2011

In a companion paper as well as in earlier publications, it has been shown that in asymmetric frame buildings, designed in accordance with modern codes and subjected to strong earthquake excitations, the ductility demands at the so called "flexible" edges are consistently and substantially higher than the ductility demands at the "stiff" edges of the building. In some cases the differences in the computed ductility factors between elements at the two opposite building edges exceeded 100%. Similar findings have also been reported for code designed reinforced concrete buildings. This is an undesirable behavior as it indicates no good use of material and the possibility for overload of the "flexible" edge members with a consequent potential for premature failure. In the present paper, a design modification will be introduced that can alleviate the problem and lead to a more uniform distribution of ductility demands in the elements of all building edges. The presented results are based on the steel frames detailed in the companion paper. This investigation is another step towards more rational design of non-symmetric steel buildings.

• Earthquakes and Structures
• /
• 제16권6호
• /
• pp.691-704
• /
• 2019

This study simulates the responses of large-scale bridge piers under pseudo-dynamic tests to investigate the performance of four types of numerical models that consider the nonlinear behavior of the pier and the rocking behavior of the footing. In the models, beam-column elements with plastic hinges are used for the pier, two types of foundation models (rotational spring and distributed spring models) are adopted for the footing behavior, and two types of viscous damping models (Rayleigh and dashpot models) are applied for energy dissipation. Results show that the nonlinear pier model combined with the distributed spring-dashpot foundation model can reasonably capture the behavior of the piers in the tests. Although the commonly used rotational spring foundation model adopts a nonlinear moment-rotation property that reflects the effect of footing uplift, it cannot suitably simulate the hysteretic moment-rotation response of the footing in the dynamic analysis once the footing uplifts. In addition, the piers are susceptible to cracking damage under strong seismic loading and the induced plastic response can provide contribution to earthquake energy dissipation.

• 한국지진공학회논문집
• /
• 제10권3호
• /
• pp.125-134
• /
• 2006

기존의 액상화 평가방법은 대부분 미국, 일본 등 지진 발생빈도가 높고 그로 인한 액상화 피해가 빈번한 국가에서 주도적으로 연구가 진행되었으며, 개발된 액상화 평가방법들은 큰 지진규모(M=7.5)에 기초하고 있다. 국내에서도 1997년 실제적인 내진연구가 시작된 이래 액상화 평가의 구체적 규정이 제정되었으나, 내진설계기준에서는 실지진하중을 등가의 전단응력으로 간편화한 경험적인 방법과 실내진동실험에 의한 액상화 상세평가 방법을 통해 액상화 평가를 수행하도록 되어있다. 그러나 이러한 경우 실제 지진하중의 특성을 평가과정에서 반영하지 못하는 문제점이 있다. 본 연구에서는 이러한 문제점을 개선하기 위하여 실제 지진파 고유의 특성을 적용한 진동삼축실험을 통하여 상대밀도와 실트질함유량의 변화에 따른 액상화 저항강도를 산정하였다. 실험결과를 토대로 국내의 대표적인 항만지역의 지진응답해석 결과와 비교 분석하여 중진지역에 적합한 액상화 평가 생략기준을 제시하였다. 또한 액상화 평가시 정현하중 사용의 문제점을 개선하기 위하여 쐐기하중 및 선형증가쐐기하중 실험을 수행하여 하중 변화에 따른 액상화 저항강도 특성을 분석하였다.

• 지질공학
• /
• 제24권2호
• /
• pp.273-281
• /
• 2014

대부분의 내진설계 기준에서 설계지진지반운동은 기반암에서의 기준 스펙트럼과 지반동적 조건 정량화를 위한 부지증폭계수에 의해 정의된다. 특히, 지진공학적 기반암은 지진파가 증폭 없이 감쇠전파되는 기초적 지반구성층이다. 지진공학 관점에서 기반암을 파악하기 위하여, 원위치 탄성파시험으로 획득한 전단파속도($V_S$) 자료를 시추조사 시 구분되는 암반층에 대해 살펴보았다. 국내 연암에서 대부분의 $V_S$ 자료는 강지진 관측소 설치 시 고려되는 공학적 기반암의 최저 $V_S$ 값인 750 m/s에 비해 크게 나타났으나, 풍화암에서는 전체의 60 % 정도가 작게 나타났다. 따라서 국내 풍화암 하부의 연암 및 그 이상 경도의 암반층을 지진공학적 기반암으로 고려해야 한다.