• 토지주택연구
• /
• 제4권2호
• /
• pp.193-200
• /
• 2013

건설공사에서 공기는 매우 중요한 요소로 건설사업비에 미치는 영향이 크다. 선진국들은 공기단축을 통해 건설사업비를 줄이고 있다. 국내 건설업체들도 공기단축을 위해 많은 노력을 기울이고 있지만, 공기단축 방법을 체계적으로 제시하지 못하고 있다. 일반적으로 골조공사의 공기는 거푸집의 존치기간에 영향을 받기 때문에 공기단축을 위해서는 거푸집의 존치기간을 단축해야 한다. 본 연구에서는 거푸집의 존치기간을 단축하기 위해 다양한 조건들의 조강콘크리트를 만들어서 압축강도 실험을 실시하였다. 이를 통해 거푸집의 탈형 시기를 제안하였다. 연구결과에 의하면 골조공사에 조강콘크리트를 사용하면 거푸집의 존치기간을 상당히 단축할 수 있는 것으로 나타났다. 본 연구결과들은 골조공사의 공기단축을 도모할 때 유용하게 활용될 수 있을 것이다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 추계 학술논문 발표대회
• /
• pp.203-204
• /
• 2014

Unlike other members, beams have various cross-sections and they have an important role of delivering the load of slabs. A beam form neighbors the columns and slabs, which makes it difficult to be installed. In a conventional way to exclusively use the form after concrete pouring, the form and a support should be both removed. Then, the support should reinstalled to sustain the stripping time of form, resulting in a structural issue. To solve such structural problem, the study proposes SMART beam form that uses filler panels and supports for filler. The floor filler panels and supports for filler are not removed after concrete curing, to conform to the stripping time of supports. Thus, any structural problem such as cracks and reduction of compressive strength owing to the gap of load bearing capacity can be prevented. The study results will be used as cases for studies on productivity analyses.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 가을 학술발표회 논문집
• /
• pp.1219-1224
• /
• 2001

In this study, concrete what plenty of fly ash used as binder is left in three condition humid condition($35^{\circ}C$), normal condition($20^{\circ}C$) and cold condition($5^{\circ}C$). Fly ash concrete is tested in fresh properties and early strength. The result of tests could give the decisive factor of form side's stripping time. The purpose of this study is presenting the stripping time data to help the construction work. The result of this study is below. 1. The plain concrete specimen in humid condition developed high strength before 5 days, then strength development is declined. 10 day strength of plain specimen is smaller than the normal condition specimen's. 2. The strength of the concrete which plenty of fly ash used is more developed than the concrete in normal condition. It says that fly ash concrete is useful in the humid condition. 3. As fly ash substitution rate is downsizing and outdoor temperature degree is low, form stripping times is getting shorter.

• Asian-Australasian Journal of Animal Sciences
• /
• 제5권3호
• /
• pp.475-480
• /
• 1992

The effect of mechanical factors and season of the year on milking characteristics (milk yield, time of milking, rate of milk flow, stripping time and tripping milk) were studied on 26 Holstein Friesian cows, raised under Saudi Arabia environmental conditions. Cows were in the third and fourth lactation and reached the peak. Cows milked twice a day with equal intervals. Three vacuum levels (34, 38 and 42 cfm) and two pulsation ratios were used to form six vacuum-pulsation combinations. The study was carried during two seasons Autumn-Winter (S1) and Spring-Summer (S2). After absorbing the cow equations least square analysis was used to analyze the data. Vacuum level 38 cfm and pulsation ratio 70:30 was the best among all combinations of vacuum level-pulsation ratio. No significant effect (p < .01) for season, up to the seventh half minute, on the rate of milk flow. However, season of the year has a significant effect on total milk yield, stripping time and stripping milk.

• 대한소아치과학회지
• /
• 제26권1호
• /
• pp.119-125
• /
• 1999

Air turbine handpiece를 사용하여 치간 법랑질을 삭제하는 Air-rotor stripping 술식은 악궁확장이나 발치 술식에 대한 대체방안으로써 arch length discrepancy를 해결할 수 있는 효과적인 접근법으로 사료된다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제12권2호
• /
• pp.59-66
• /
• 2008

건설현장에서 노동집약적 공정과정인 거푸집공정을 개선하고자 비탈형 영구거푸집에 대한 연구가 진행되어 왔지만 지금까지 개발된 영구거푸집의 경우, 그 크기 및 성능 등에 있어서 현장에 적용하기에는 많은 어려움이 있다. 본 논문은 개발된 고성능 영구 거푸집(HPPF)이 적용된 구조물의 현장적용성 분석에 대한 연구로써, 기 실험된 HPPF의 재료 및 구조적 특성을 바탕으로 해석적 접근을 수행하였다. 대상 구조물로는 HPPF 재료특성이 효율적으로 발휘될 수 있는 벽체 구조물을 선정하였으며, 유한요소 해석 프로그램을 이용하여 1회 최대 타설높이를 분석한 후, 이를 실제 벽체설계에 적용하여 HPPF 적용단면의 현장적합성을 검증하였다. 분석결과, 기존 콘크리트만으로 제작된 벽체구조물에 비해, HPPF의 추가적인 성능향상 효과로 인해 기존 콘크리트 벽체구조물 대비 콘크리트 및 철근량의 절감효과는 물론, 장기적으로 HPPF 적용 고내구성 벽체 구조물에 의한 직 간접적인 경제적 효과를 확보할 것으로 분석되었다.

• 한국건축시공학회지
• /
• 제3권1호
• /
• pp.115-122
• /
• 2003

In order to analyze liquidity change according to increasing the charge of superplasticizer, we inputted charges by dividing into six steps, 0% through 1.25%; at the same time, to observe liquidity change according to the change of charge-time, we carried out the experiment applying 30-minute intervals, i.e. at beginning of mixing, 30, 60 and 90 minutes. The results are below. 1) According to increasing the charge of superplasticizer, the liquidity of concrete was enhanced, however, when inputted 1.25%, a little segregation was occurred, which allowed us to make a conclusion that concrete performance would be deteriorated due to this segregation. 2) When we inputted 1.25% of superplsticizer, steady liquidity features were shown regardless of the charge-time of concrete, which allowed us to make a conclusion that this input would be the best for liquidity performance considering only liquidity features. 3) After analyzing the dynamical features of liquid concrete, the result showed that there was not significant effect on revelation of compressive strength. We concluded form this result that there was no influence on the stripping-time of a mold form. 4) When we charge superplasticizer in concrete more than 1%, we, in advance, should clearly judge the concrete performance required during constructing in site, as it were, the compressive strength or liquidity etc.; furthermore, we had better decide a charge and input-time of superplasticizer to meet the required performance.

• 콘크리트학회논문집
• /
• 제16권3호
• /
• pp.327-334
• /
• 2004

본 연구에서는 초기재령에서 고강도콘크리트의 압축강도 발현 특성 검토 및 해석 그리고 콘크리트와 거푸집간의 부착강도 특성을 분석하며, P형 슈미트해머를 이용한 반발도와 압축강도간의 상관관계를 검토하므로서 실무의 고강도콘크리트 측면 거푸집 탈형과 연관한 관련규정의 적합성을 재검토하고, 아울러 거푸집제거와 연관한 효율적인 품질관리 방법에 대하여 제안하고자 한다. 연구결과에 따르면, W/B가 증가할수록 응결시간은 감소하는 것으로 나타났으며, 본 연구의 범위에서 로지스틱 모델에 의한 강도증진 해석 결과 압축강도 8MPa를 발휘하는 시간과 적산온도는 17${\~}$20시간, $21{\~}25^{\circ}D{\cdot}D$ 정도로 나타났다. 거푸집과 콘크리트의 부착강도는 종결시점에서 가장 크게 나타났으며 그 이후에는 감소함을 보였고, 거푸집에 부착되어 박리되는 콘크리트의 양은 응결이전에 크게 나타났으며, 그 이후에는 점차적으로 감소하는 경향을 보였다. P형 슈미트해머에 의한 반발도 실험결과 압축강도 발현시점보다 약 2${\~}$3시간 정도 빠르게 측정할 수 있으며, 반발도가 32 이상이면 측면 거푸집을 탈형 할 수 있는 시기로 품질관리가 가능할 것으로 판단되었다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 춘계 학술발표회 제16권1호
• /
• pp.560-563
• /
• 2004

This study reports the site application of concrete using AE Water Reducing Agent of Early-Strength Type. According to the lab test results, we have made plans of batch plant pilot test, and we have analyzed the erly aged compressive strength and workability of the concrete. We applied the early-strength development concrete to the construction site. We accomplished the slump test in order to evaluate the workablity and air contents, we made site curing mold to evaluate the early strength of members. As a result, we judgeed the superior property of early strength development of the concrete, and thought that we can reduce the time of form stripping more $40\%$ than ordinary strength concrete. We thought that we can reduce the term of works and finally we can accomplish the economical construction.

• 천문학회지
• /
• 제37권5호
• /
• pp.575-578
• /
• 2004

High resolution observations of cluster of galaxies by Chandra have revealed the existence of an X-ray emitting comet-like galaxy C153 in the core of cluster of galaxies A2125. The galaxy C153 moving fast in the cluster core has a distinct X-ray tail on one side, obviously due to ram pressure stripping, since the galaxy C153 crossed the central region of A2125. The X-ray emitting plasma in the tail is substantially cooler than the ambient plasma. We present results of two-dimensional magnetohydrodynamic simulations of the time evolution of a sub clump like C153 moving in magnetized intergalactic matter. Anisotropic heat conduction is included. We found that the magnetic fields are essential for the existence of the cool X-ray tail, because in non-magnetized plasma the cooler sub clump tail is heated up by isotropic heat conduction from the hot ambient plasma and does not form such a comet-like tail.