• 한국막학회:학술대회논문집
• /
• 한국막학회 1998년도 추계 총회 및 학술발표회
• /
• pp.109-111
• /
• 1998

TIPS 공정에 의한 고분자막 제조기술은 기존의 적정용매가 없어서 분리막 소재로 상용할 수 없었던 결정성 고분자 및 고강도 엔지니어링 플라스틱 등에 대하여 소재의 폭을 넓힐 수 있고 적정 희석제와의 혼합으로 고분자 소재의 용융점을 강화 시킬 수 있어 가공온도의 제약을 어느정도 해결할 수 있다는 장점을 가지고 있다. 또한 TIPS 공정에 의해 제조되는 고분자 matrix, 혹은 고분자 막의 미세구조는 선택된 고분자와 희석제의 종류 및 상분리 mechanism에 따라 크게 달라지므로 이들 제조 변수의 적절한 조절을 할 수 있다. 본 연구에서는 열유도 상분리 공정과 연신공정을 통해 몇가지 제조변수를 조절하여 미세다공성 중공사막을 제조하였다. 고분자-희석제 용융액의 melt viscosity를 변화시켜 보았고, 희석제의 추출 후 열처리를 하여 이에 따른 영향을 알아보았다. 상분리 속도가 막의 구조 및 성능에 미치는 영향을 알아보기 위해 coagulation bath temperature를 변화시켜 보았으며, 몇가지 종류의 coagulant를 사용하여 막을 제조한 후 성능을 측정해 보았다. 또한 기존의 상업용 막과 성능 및 구조를 비교하여 보았다.

• 소성∙가공
• /
• 제10권1호
• /
• pp.59-66
• /
• 2001

Recently, the technology of incremental forming for sheet metal components has drawn attention for small-batch productions. In the present investigation, a forming tool containing a freely-rotating ball was developed and applied to forming of various shapes with full annealed Al 1050 sheet. Deformation characteristics occurring during forming with this tool was examined through FEM analysis and grid measurement. It was found that deformation modes developed along a straight path and around a corner are close to those of plane-strain and equi-biaxial stretching, respectively, and that cracks occur mostly at corners for the same depth of tool. FEM analysis was successfully applied to this special type of forming process and provided comparable results to the measurements from experiment.

• Bulletin of the Korean Chemical Society
• /
• 제20권5호
• /
• pp.559-566
• /
• 1999

Gas-phase alkylations of delocalized ambident anions, Y---CH---X- where X, Y=CH2, O, or S, have been investigated theoretically at the MP2/6-31+G*//MP2/6-31+G* and QCISD/6-31+G*//MP2/6-31+G* lev-els. O-and S-alkylations (X=O and S) are more favored kinetically by ΔE^≠ = 4.6 and 9.8 kcal mol-1 than the respective C-alkylations even though they are thermodynamically less favored by 22.4 and 6.0 kcal mol-1 respectively. It was found that the transition structures for the C-alkylations are imbalanced due to the endoergic rehybridi-zation of the carbon center from sp2 to sp3 which leads to premature bond contraction of the C-Y bond and delayed bond stretching of the C-X bond. In the O-, or S-alkylation, such endoergic process is not required since the σ-lone pair on O or S is involved in the initial stage of alkylation. The imbalanced TSs for the C-alkylation are accompanied by higher intrinsic barriers and deformation energies.

• 반도체디스플레이기술학회지
• /
• 제16권2호
• /
• pp.106-109
• /
• 2017

Recently, ancient documents are actively studied and discussed. However, ancient documents has a few problems on interpretation. The antique documents are too fragile to hand over. So, some studies have been carried out using terahertz to read ancient documents without damaging them. Three techniques are necessary to read letters using terahertz. First, PPEX algorithm, which distinguishes pages. Second, TGSI technique, which distinguishes text from paper on a page. Third, CCSC algorithm, which transforms signals to letters. In this paper, we will describe the preprocessing process to facilitate the recognition of letters before applying the post processing as we mentioned above. Histogram equalization, Histogram stretching and the Sobel filter were applied to the preprocessing.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1999년도 춘계학술대회논문집
• /
• pp.62-65
• /
• 1999

To reduce the cost of finite element analyses for sheet forming a 3D hybrid membrance/sheel method has been developed to study the springback of anisotropic sheet metals. in the hybrid method the bending strains and stresses were analytically calculated as post-processing using incremental shapes of the sheet obtained previously from the membrane finite element analysis. To calculate springback a shell finite element model was used to unload the final shape of the sheet obtained from the membran code and the stresses and strains that were calculated analytically. For verification the hybrid method was applied to predict the springback of a 2036-T4 aluminum square blank formed into a cylindrical cup. the springback predictions obtained with the hybrid method was in good agreement with results obtained using a full shell model to simulateboth loading an unloading and the experimentally measured data. The CPU time saving with the hybrid method over the full shell model was 75% for the punch stretching problem.

• 한국정밀공학회지
• /
• 제18권8호
• /
• pp.182-192
• /
• 2001

During the deep drawing process an initially flat blank is clamped between the die and the blank holder after which the punch moves down to deform the clamped blank into the desired shape. In general, sheet metal forming may involve stretching, drawing, bending or various combinations of those basic modes of deformation. The deformation problems of sheet metal working involve non-linearity in geometry and material. In this work, The punch load and thickness strain of electro-galvanized sheet steel (SECD) for elliptical deep drawing are examined under the various process conditions including, punch shape radius, die shape radius. The changes of punch load and thickness strain distribution of the deformed elliptical cup are affected by the size of each die shape radius.

• 한국전문물리치료학회지
• /
• 제14권4호
• /
• pp.58-65
• /
• 2007

The purpose of this study was to investigate the effects of serratus anterior strengthening exercises on scapular position and Visual Analog Scale (VAS) pain measurements taken at the resting position in young adults with adducted scapular. The exercise program included stretching of the scapular retractor and strengthening of the serratus anterior muscle. We measured the distance from the midline of the thorax to the vertebral border of the scapular with a tape line (Superior Kibler), and the distance from the 7th cervical spinous process to the acromial angle with 3-dimension motion analysis system, to compare the resting scapular position before and after exercise. Fifteen subjects with adducted scapular were recruited to compare the resting scapular position and VAS. The distance from 7th cervical spine process to acromial angle of the scapular and VAS decreased significantly (p<.01) after exercise, while the distance from the midline of the thorax to vertebral border of the scapular increased (p<.05). The conclusion is that the serratus anterior exercise program altered the resting scapular position and decreased VAS.

• 한국기계가공학회지
• /
• 제14권4호
• /
• pp.28-33
• /
• 2015

In this study, the optimal design for the support and the binding device for the protection of crops for the maximum allowable stress of the shape necessary to minimize volume has been proposed. Optimization of the support and the binding device for the crops should be designed to support businesses in terms of profit, in part to reduce the material, and to profit from the ease and speed of working that part of the farmers. We used CATIA for the mechanical design and the ANSYS program for the structural analysis. Additionally, the optimization was performed by PIAnO with seven design variables for the binding device and three parameters for the support. The weight method using a multi-objective function was also determined by the Pareto optimal solution. The volume of the binding device in the optimum design result was found to be reduced by 16%, from $2.278e-005m^3to1.912e-005m^3$. From the result, we confirmed the effectiveness of the design method proposed as a multi-objective function optimization problem.

• 한국기계가공학회지
• /
• 제13권2호
• /
• pp.1-7
• /
• 2014

Recent experimental observations support the hypothesis that mechanical stimuli play a role in regulating the specialized molecular expression of articular cartilage in vitro and in vivo. Other studies have demonstrated that the continuous passive motion(CPM)bioreactor for whole joints can provide a platform for possible future in vitro studies and applications, including possible interactions of bio-mechanical and biochemical signals. In this study, we have developed acustom-made bioreactor capable of bending and stretching with circular type motion, and a biomimetic knee joint model, using a 3D printer. This system could be used to investigate the effects of rehabilitative joint motion of dynamic culture.

• 소성∙가공
• /
• 제12권8호
• /
• pp.710-717
• /
• 2003

The implicit, finite element analysis program for analyzing the springback in the warm forming process of aluminum alloy sheets was developed. For the description of planar anisotropy in warm forming temperatures, Barlat's yield function is employed, and the power law type constitutive equation is used in terms of working temperatures for the depiction of work hardening in high temperatures. Also, Jetture's 4-node shell elements are introduced for reflecting the mechanical behavior of aluminum alloy sheet and the non-steady heat balance equations are solved for considering heat gain and loss during the forming process. For the springback evaluation, Newton-Raphson iteration method is introduced for overcoming the geometric nonlinearlity problem. In order to verify the validity of the FEM program developed, the stretching bending and springback processes are simulated. Though springback analysis results are slightly bigger than experimental ones, they have the same trend of the decreasing springback as the forming temperature increases.