• Textile Coloration and Finishing
• /
• 제18권2호
• /
• pp.31-38
• /
• 2006

Silk fabrics are very popular and widely used because of their elegant appearance. However, silk fabrics generally have easy wrinkle, and do not stretch and deform permanently after machine washing. Then the stretched properties of silk fabrics are important for the application of industrial textile materials such as formal and sports wear. Thus, this research surveys the covering, weaving and degumming conditions for stretched silk fabrics. As a result, yarn breaking stress was reduced with increasing spindle speed, and the yarn twists were optimized under the covering condition of polyurethane/silk with PVA pretreatment. In addition, the shrinkage of the silk fabrics treated with star degumming process was reduced by continuous NaOH degumming process. The fabrics showed the fabric physical properties with optimum stretched properties and evenness surfaces.

• Transactions of Materials Processing
• /
• 제9권1호
• /
• pp.27-34
• /
• 2000

Sheet metal formabilities for aluminum 1050 and 5052 were experimentally investigated in this study. Deep drawability, bendability and stretch formability were measured at each process condition and correlated with tensile properties of sheet metal. To compare the formabilities of aluminum 1050 and 5052 sheets with those of steel sheets, deep drawing quality(DDQ) steel sheets are also tested at the same test conditions. Through the experimental studies, influential process variables for each forming process were obtained and correlated with the tensile properties. The comparisons of sheet metal formabilities with those of steed sheets showed that aluminum 1050 and 5052 is inherently deficient in formability than steel sheets but Al 5052 that has highter n and r value than al 1050 showed better formabilities.

• Transactions of Materials Processing
• /
• 제28권3호
• /
• pp.154-158
• /
• 2019

The hole expansion tests using conical punch, flat punch or hemispherical punch are widely used for stretch flangeability verification of HSS. In this study, we investigate the strain distribution on the shear edges of the hole expansion test using grid marking and a projector. A small crack at the edge is distributed, resulting in a large gap between the HER and the crack strain. The strain distribution at the edges is irregular due to anisotropy of sheet metal. While an edge perpendicular to the rolling direction indicate a lower strain level compared to an edge parallel to the rolling direction, edge cracks occur at the edge perpendicular to the rolling direction. To predict the manifestation of edge cracks in FE analysis, the result of the hole expansion test with a crack strain measurement may well be a better tool than FLD. In this case, the level of strain and the direction of the edge relative to the rolling direction should be well considered.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• 제24권3호
• /
• pp.292-298
• /
• 2013

A signal processing technique is introduced in this paper in order to estimate the lengths of missile targets. To measure the length of a target, it is necessary to know the information on the target's location and aspect angle. Chirp waveforms and stretch processing are used to estimate the location and angle of a missile as well as HRRP(High Resolution Range Profile). RELAX(relaxation) algorithm, which is one of the spectral estimation techniques, were used to find scattering centers of a missile from HRRP. From the information on the distribution of one-dimensional(1-D) scattering centers on a target, we can discriminate the length of a missile.

• Geophysics and Geophysical Exploration
• /
• 제21권2호
• /
• pp.94-102
• /
• 2018

To characterize virtual reflection images of deep subsurface by the method of seismic interferometry, we analyzed effects of offset range, ambient noise, missing data, and statics on interferograms. For the analyses, seismic energy was simulated to be generated by a 5 Hz point source at the surface. Vertical components of particle velocity were computed at 201 sensor locations at 100 m depths of 1 km intervals by the finite difference method. Each pair of synthetic seismic traces was cross-correlated to generate stacked reflection section by the conventional processing method. Wide-angle reflection problems in reflection interferometry can be minimized by setting a maximum offset range. Ambient noise, missing data, and statics turn to yield processing noise that spreads out from virtual sources due to stretch mutes during normal moveout corrections. The level of processing noise is most sensitive to amplitude and duration time of ambient noise in stacked sections but also affected by number of missing data and the amount of statics.

• Korean Journal of Remote Sensing
• /
• 제9권1호
• /
• pp.37-49
• /
• 1993

In this research, the WEF AX and APT(Automatic Picture Transmission) data receiving and image processing software using PC/AT called WADIPS(WEFAX and APT Data Integrated Processing System) Software has been developed. The main functions of WADIPS software are follow : 1) Real time receiving and saving to hard disk of WEFAX and APT data 2) B/W(Black and White) and false color display 3) Image enhancement using histogram stretch and color control 4) 2-4 times zooming 5) Hard copy of data using dithering and patterning 6) Animation 7) File management 8) On line help. WADIPS can be used in the offices or persons need real time meteorological information and education offices to teach the image processing technique and general characteristics of meteorological satellites.

• 대한공업교육학회지
• /
• 제34권2호
• /
• pp.321-330
• /
• 2009

This study presents the blow molding of injection stretch-blow molding process for PET bottle. The numerical analysis of the blow molding of PET bottle is considered in this paper using CAE with a view to minimize the thickness difference. In order to determine the design parameters and processing conditions in blow molding, it is very important to establish the numerical model with physical phenomenon. In this study, a shell model with thickness has been introduced for the purpose and blow simulations with 3-type blow process condition are carried out. The simulations resulted in the thickness distribution in good agreement with the physical phenomenon. Also, from the result of numerical analysis, we appropriately predicted the thickness distribution along the PET bottle wall and Using the result of numerical analysis we apply the preform design and blow molding process condition for optimization.

• Transactions of Materials Processing
• /
• 제11권8호
• /
• pp.682-690
• /
• 2002

The formation of adiabatic shearband in tungsten heavy alloys(WHA) was studied in this investigation. Five prismatic specimens were loaded by high velocity impacts and treated as plane strain problems. To find out the effect of particle's volume ratio, specimens containing 81%, 93% and 97% volume percents of tungsten particles were used. Also the effects of particle's geometry and size on the formation of shearband were studied for 81% volume percent alloys by small size particle model, large size particle model and undulated particle models, and the results were discussed.be used to diagnose the causes of necking and fracture in industrial practice and to investigate whether these defects were caused by material property variation, changes in lubrication, or incorrect press settings. In non-axisymmetric deep drawing, three modes of forming regimes are found: draw, stretch, plane strain. The stretch mode for non-axisymmetric deep drawing could be defined when the major and minor strains are positive. The draw mode could be defined when the major strain is positive and minor strain is negative, and plane strain mode could be defined when the major strain is positive and minor strain is zero. Through experiments the draw mode was shown on the wall and flange are one of a drawn cup, while the plane strain and the stretch mode were on the punch head and the punch corner area respectively, We observed that the punch load of elliptical deep drawing was decreased according to increase of die corner radius and the thickness deformation of minor side was more large than major side.

• Journal of the Korea Institute of Military Science and Technology
• /
• 제18권3호
• /
• pp.253-259
• /
• 2015

This paper introduces a signal processing technique for discrimination of missile target. In order to detect and discriminate the target, a seeker radar makes use of chirp waveform and stretch processing to generate high resolution range profiles(HRRPs). RELAX(relaxation) algorithm, which is one of the spectral estimation techniques, was used to find scattering centers of a missile from HRRP. From the information on the distribution of one-dimensional(1-D) scattering centers on a target, we can discriminate the target without noise.

• Journal of the Korean Society of Clothing and Textiles
• /
• 제25권6호
• /
• pp.1037-1045
• /
• 2001

This research is done to design and manufacture prototype clean room garments to improve the product yield of the clean room processing. To assist the research, other papers and references on the same subject were collected for analysis. Also the researcher made interviews with the workers at the clean room. The prototype garments made for this project was compared against the commercially available clean room garments used in the industry. A set of test was conducted to measure particle release from the garments. The prototype clean room garments was manufactured after having considered all the aspects stated above, and tested for the level of particle release. The test subjects performed 4 different movements(marching, arms stretch, squat and rise, and jogging) while wearing the prototype garments and commercially available clean room garments. Particle counts produced by each movement were measured. The data collected was statistically analyzed. The followings are the result of the test. 1) Overall, the prototype garments yielded less particle release.(p<0.001) 2) It showed greatest difference of particle counts for jogging(p<0.001) and squat and rise(p<0.001). In the arms stretch test. the prototype garments was also more effective in controling the particle, however, in the marching test. no significant difference was detected. 3) The prototype garments had less particle release in upper(p<0.001), middle(p< 0.001), and lower level(p<0.01) than the commercially available clean room garments. Manufacturing a new fabric for the clean room processing is important, but this research proves that the design of the clean room garments also determines the efficiency garments in the particle control. Therefore the same fabric can perform differently according to how it is designed. Improving the design will also improve the 7article control and reduce the cost of research. Eventually, the manufacturers will increase the product yield.