• Korean Journal of Materials Research
• /
• v.8 no.8
• /
• pp.693-698
• /
• 1998

The effects of $AI_{2}$$O_{3}$ and the ratio of $Na_2O/B_2O_3$ on the phase separation and optical properties of sodium borosilicate glass film fabricated by AFD(Aerosol Flame Deposition) were investigated. When AI,O, of 6wt% was added to $66SiO_2-27B_2O_3-7Na_2O$ the clear glass film without any crystallization was produced under air-quenching condition after consolidation. As the amount of $AI_{2}$$O_{3}$ increased from 1.5 to 6.0 wt% the refractive index linearly increased from 1.4610 to 1.4701, and the difference of TE and TM mode causing by residual stress in film increased gradually. However, the difference of TE and TM mode to reveal birefringence could be minimized by annealing below the glass transition temperature after consolidation and air quenching. On the other hand. as the ratio of $Na_2O/B_2O_3$ increased the refractive index and birefringence of glass film tended to increase, but the measurement of their values were not available at over the critical ratio of $Na_2O/B_2O_3$, because of the cloudiness due to crystallization. The phase separation was greatly accelerated with increasing the ratio of $Na_2O/B_2O_3$.

• Journal of the Korean Geotechnical Society
• /
• v.18 no.5
• /
• pp.37-42
• /
• 2002

Artificial neural networks are efficient computing techniques that are widely used to solve complex problems in many fields. In this paper a liquefaction potential was estimated by using a back propagation neural network model applicated to cyclic triaxial test data, soil parameters and site investigation data. Training and testing of the network were based on a database of 43 cyclic triaxial test data from 00 sites. The neural networks are trained by modifying the weights of the neurons in response to the errors between the actual output values and the target output value. Training was done iteratively until the average sum squared errors over all the training patterns were minimized. This generally occurred after about 15,000 cycles of training. The accuracy from 72% to 98% was shown for the model equipped with two hidden layers and ten input variables. Important effective input variables have been identified as the NOC,$D_10$ and (N$_1$)$_60$. The study showed that the neural network model predicted a CSR(Cyclic shear stress Ratio) of silty-sand reasonably well. Analyzed results indicate that the neural-network model is more reliable than simplified method using N value of SPT.

• Korea Journal of Hospital Management
• /
• v.9 no.4
• /
• pp.87-100
• /
• 2004

The main objective of this paper is to investigate the burnout state, coping types, and their relationship with organizational citizenship behavior, and based on the investigation, to provide some reference materials for effective management of burnout and appropriate methods of coping. For this purpose, employees of Korean Red Cross Blood Center were selected as the subject of the research. Data for empirical analysis were obtained through mail survey using structured and self-administered questionnaire for 282 employees of five Red Cross Blood Centers across the nation. Following is the summary of the results: 1) Degree of organizational citizenship behavior was higher among the married, the forties in age, and the employees whose major reason for choosing to work at the Center was 'to help other people.' On the other hand, degree of burnout was higher among the single but lower among the forties in age and the employees who chose to work at the Center because of suitable abilities and interests. As for the types of coping, problem-oriented coping method was more frequently used by the married, older, relatively more-educated and higher-grade employees. 2) Among the three kinds of burnout, 'achievement burnout' was found to have the greatest influence on the organizational citizenship behavior, negatively affecting organizational citizenship behavior as a whole and all of its components except for 'sportsmanship.' Next was 'impersonality burnout,' which also had negative effect on organizational citizenship behavior as a whole, and altruism, conscientiousness and sportsmanship among the components. Finally, 'emotion burnout' appeared to have positive effect on altruism and courtesy but negative effect on sportsmanship. 3) Among the various types of coping, 'problem-oriented' and 'positive perspective' coping methods were found to positively influence overall organizational citizenship behavior, whereas 'stress dissolution' had negative effect. These results imply that special management, counselling and education are needed for sociodemographic groups with high burnout to utilize problem-oriented and positive perspective coping methods which are considered to have desirable effects in coping with burnout problems. In addition, some methods should be devised to prevent and manage the 'achievement burnout' that was found to have great negative influence on organizational citizenship behavior.

• Journal of the Korea Concrete Institute
• /
• v.17 no.4 s.88
• /
• pp.581-586
• /
• 2005

High-performance concrete (HPC), which is particularly sensitive to self-desiccation, is required to be durable even in severe environmental conditions, i.e. costal area, cold district, etc. However, in recent years, some attention was particularly given to cracking sensitivity of high performance concrete at early age. It has been argued and demonstrated experimentally that such concrete undergoes autogenous shrinkage due to self-desiccation at early age under restrained condition, nd, as a result, internal tensile stress may develop, leading to micro cracking and macro cracking. This shrinkage-introduced crack produces a major serviceability problem for concrete structures. One possible method to reduce cracking due to autogenous shrinkage is the addition of expansive additive. Tests conducted by many researches have shown the beneficial effects of addition of expansive additive for reducing the risk of autogenous shrinkage-introduced cracking. However, the research on hydration model of expansion additive has been hardly researched up to now. This paper presents a study of the hydration model of Ettringite-Gypsum type expansive additive. As a result of comparing forecast values with experiment value, proposed model is shown to expressible of hydration of expansive additive.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.16 no.4
• /
• pp.217-228
• /
• 2014

The purpose of this study is to grasp inconveniences and improvements by examining wearing condition and satisfaction of protective clothing targeting 114 Korean farmers and to suggest basic data for enhancement of pattern and wearing satisfaction of protective clothing by understanding problems of pesticide-proof clothing through comparative analysis on the size of its commercial products. Most of male subjects were in charge of spraying pesticide, whereas female were most likely to play an assistant role to hold the hose of pesticide applicator. Both of female and male subjects were very aware of the harmful effect of pesticide on human body and tried to take off the clothes immediately after spraying it to reduce possible damage caused by pesticide. As a result of examining wearing condition, the farmers avoided wearing protective clothing because that it feels hot, stuffy, and uncomfortable to move. This hesitant response of wearing the clothing was not shown significantly in case of female subjects who play an assistant role for spraying. Although the farmers wore protective equipments such as mask or gloves in a proper way as compared to protective clothing, they seemed to choose alternative way rather than best way to block pesticide completely. The satisfaction regarding to the fitting of protective clothing which the subjects showed low in all items of upper-lower clothes except waistline. It is necessary to improve the functionality such as relief from heat stress and convenience for movement rather than design or economic in protective clothing development. As a result of comparing the size of five kinds of commercial protective clothing, the farmers got confused to choose the product since designation method of size across companies showed a significant difference in an identical clothing size. In addition, the sizing system developed on a basis of a well-built man has become a hindering factor in wearing satisfaction of female farmers.

• Journal of Microbiology and Biotechnology
• /
• v.12 no.2
• /
• pp.318-326
• /
• 2002

The pathogenic marine bacterium Vibrio vulnificus is the causative agent of food-borne diseases such as life-threatening septicemia. To better understand this organism's strategies to survive osmotic stress, a mutant that was more sensitive to high osmolarity was screened from a library of mutants constructed by a random transposon mutagenesis. By a transposon-tagging method, putAP genes encoding a proline dehydrogenase and a proline permease were identified and cloned from V. vulnificus. The amino acid sequences deduced from nucleotide sequences of putAP from V. vulnificus were 38 to $59\%$ similar to those of PutA and PutP reported from other Enterobacteriaceae. Functions of putAP genes were assessed by the construction of mutants, whose putAP genes were inactivated by allelic exchanges. When proline as the sole carbon or nitrogen source was used, the putA mutant was not able to grow to the substantial level, revealing the proline dehydrogenase is the only enzyme for metabolic conversion of proline into other amino acids. Although the growth rate of the putP mutant on proline as the sole carbon or nitrogen source was significantly reduced, the mutant still grew. This indicated that at least one more proline permease is produced by V. vulnificus. The putP mutant decreased approximately $2-log_10$ CFU/ml after a hyperosmotic challenge, while the parent strain decreased approximately $l-log_10$ CFU/ml. This result suggests that the gene product of putP contributes to the osmotic tolerance of V. vulnificus.

• The Journal of Korean Academy of Prosthodontics
• /
• v.44 no.1
• /
• pp.29-39
• /
• 2006

Statements of problem: Zirconia core is used for posterior fixed partial dentures because it's good mechanical properties. Stress is concentrated on connectors in fixed partial dentures, so the proper design of connector areas is needed for adequate mechanical long-term properties of any prosthesis. The area of connector is critical, but tooth size and surrounding soft tissue limit the connector design. Purpose: The purpose of this study is to compare fracture strengths between different connector designs of zirconia core for posterior fixed partial dentures manufactured with CAD/CAM system and determining the optimal connector design satisfying strength and hygiene. Material and method: The following four groups of 40 posterior fixed partial denture specimens(each group 10) were fabricated as followed; group 1 vertical height of connector is 3mm (control group, all groups have the same condition); group 2, lingual vertical 1mm reinforcement on connector; group 3, lingual vertical 2mm reinforcing on connector and group 4, lingual vertical 3mm reinforcing on connector. Specimens were subjected to compressive loading on the central fossa of pontic by instron. SEM was used to identify the initial crack and characterize the fracture mode. Results: The results were as follows: 1. The mean fracture load of the non-lingual reinforcing group was 1212N and the lingual vertical 1mm reinforcing group was 1510N, the lingual vertical 2mm reinforcing group was 1882N, the lingual vertical 3mm reinforcing group was 1980N. 2. The reinforcing groups were statistically significant compared to non-reinforcing groups(P<0.001). 3. There were 2, 3mm reinforcing groups that were statistically significant compared to 1mm reinforcing groups(P<0.001), and the 3mm reinforcing group was not statistically significant compared to 2mm reinforcing groups(P>0.05) 4. Fractures were initiated in gingival embrasures of connectors and processed to the loading site. Conclusion: In this study, lingual reinforcement of connector for improved strength of zirconia based fixed partial denture is nessasary. And long-term study for clinical application is required

• Journal of the Korean Society of Safety
• /
• v.28 no.1
• /
• pp.117-124
• /
• 2013

Emergency operating procedures(EOPs) of nuclear power plants should be described considering the cognitive capability and limitation of operators and provide appropriate information in the aspect of human factors. Procedures which doesn't consider cognitive characteristics of operators can become causes of human errors. In previous researches, in order to reduce these problems related to the description of EOP, an improvement suggestion for EOP writer's guide has been proposed, which is reflected human factors aspects that should be considered when describing EOPs. The proposed items, however, have a necessity to be validated because it was listed from various documents such as standards and guidelines without any special validation process. For that reason, in this study, a validation process were performed to show that procedures, which are described in compliance with the requirement items proposed in the improved EOP writer's guide, have positive effects in the aspects of human errors and performance comparing with previous procedures. Experiments were performed to compare the performances of two tasks which are described in compliance with each writer's guide of before and after the improvement During each task was performed in experiments, changes of physiological responses such as EEG and ECG were measured to evaluate the cognitive workload and the stress of operators in each task. And also, as the performance, frequencies of errors and cognition speeds of each task were evaluated. In the results of the experiment, the portions of the ${\beta}$ wave decreased in the tasks overall after the improvement. In the case of ECG, change rates of the mean of R-R interval were decreased in the tasks after improvement. In the results of the performance, the cognition and the response time of the tasks after the improvement were predominant with statistical significancies. Error times in the tasks after improvement were decreased or same to the tasks before improvement. Conclusively, it was validated that the procedures were described in compliance with the improved EOP writer's guide had effects on the reduction of human errors and improvement of performance.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.29 no.1
• /
• pp.30-34
• /
• 2016

In this paper, we report that selective etching on N-polar face by EC (electro-chemical)-etching effect on the reduction of bowing and strain of FS (free-standing)-GaN substrates. We applied the EC-etching to concave and convex type of FS-GaN substrates. After the EC-etching for FS-GaN, nano porous structure was formed on N-polar face of concave and convex type of FS-GaN. Consequently, the bowing in the convex type of FS-GaN substrate was decreased but the bowing in the concave type of FS-GaN substrate was increased. Furthermore, the FWHM (full width at half maximum) of (1 0 2) reflection for the convex type of FS-GaN was significantly decreased from 601 to 259 arcsec. In the case, we confirmed that the EC-etching method was very effective to reduce the bowing in the convex type of FS-GaN and the compressive stress in N-polar face of convex type of FS-GaN was fully released by Raman measurement.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.45 no.2
• /
• pp.1-10
• /
• 2017

This study used a quasi-experimental method to investigate if both travel involvement and the degree of recall of a traumatic event affect subjective well-being. For this, independent variables such as positive affect, negative affect, and life satisfaction were established. Four waves of data collection were performed with two to three weeks intervals, then the collected longitudinal data were analysed by repeated measure ANOVA. The study results indicated that travel involvement increases positive affect and life satisfaction, with the effect lasting four weeks or more, which means that travel is an effective tool to boost subjective well-being. Respondents who thought about a traumatic event more frequently had a much higher negative affect following the disaster, and such increased negative affect was maintained over seven weeks or longer. Therefore, this study finds that negative events produce larger, more consistent, or more lasting effects than positive events. As well as travel participation, visiting an urban park is a pleasurable experience. Therefore, the study also finds that urban parks could be utilized for increasing and maintaining subjective well-being in the middle and long term as well as lessening personal stress.