• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 봄 학술발표회 논문집
• /
• pp.1041-1046
• /
• 2003

The most recent building trend is going large, high rise, high strength as overlarge project is developing in domestic construction business. Belite cement has properties like low heat, excellent long term strength, and durability without admixture (fly ash, silica fume). So, Belite cement is suitable for mass structure which is needed high strength, high fluidity and low heat property. This study is to examine the possibility of site adoption microwave-use early strength estimation method. Based on the existed study related the portland cement, the interrelation between Belite cement and microwave-use early strength estimation method is required.

• 한국건축시공학회지
• /
• 제8권5호
• /
• pp.119-125
• /
• 2008

In this paper, the estimation of super retarding concrete incorporating mineral admixtures at the same time including fly ash(FA), blast furnace slag(BS) are studied based on maturity method. The setting time was retarded, as super retarding agent contents increase and curing temperature decreases. In addition, apparent activation energy by Arrhenius function was ranged from $24\sim35$ KJ/mol with slightly difference along with mixture proportion. This value is smaller than existing value $30\sim50$ KJ/mol. Based on strength development estimation. it exhibited comparable relativity between prediction value and measurement value. Therefore, this study provided effective strength development prediction value with super retarding agent contents and mineral admixture combination. Strength development prediction equation provided herein is possibly valid for estimating accurate strength development of the super retarding concrete at the job site.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 1998년도 학술발표회 발표논문집
• /
• pp.146-149
• /
• 1998

In this study, the chloride ion penetration test and the compressive strength test should be done simultaneously on the standard cylinder specimen. And from analyzing the data from those tests, a strength estimation equation with high credibility is to be developed.

• 한국공작기계학회논문집
• /
• 제15권3호
• /
• pp.17-23
• /
• 2006

The strength estimation is carried out for injection molded plastic stepped gear. The stepped gear is considered as a plate model which is fixed by two edges and freed on the other sides. The stress of common normal gear is calculated by Lewis formula which can be derived quite simply from the equation fur the stress at the root of a cantilever beam. Stress ratio(step factor) between the common normal gear and stepped gear is proposed for the ratio of the bending stress of normal gear and that of stepped gear. This study proposes the step factor added in Dupont equation which is used for strength estimation of injection molded plastic stepped gear.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 추계 학술발표회 제16권2호
• /
• pp.675-678
• /
• 2004

The importance of predicting concrete compressive strength of in concrete structures is gradually increasing in construction industry. The estimation of concrete compressive strength of is a critical factor of the construction schedule and quality control. This study was performed to examine the relationship between concrete compressive strength and stress wave velocity which was determined by the impact echo method and SASW method.

• 콘크리트학회지
• /
• 제11권2호
• /
• pp.241-249
• /
• 1999

실제 구조물의 정확하고 합리적인 압축강도 추정을 위해서는 통계학적으로 많은 실험데이타가 필요하다. 그러나, 실제로 압축강도 자료가 제한되어 있기 때문에 추정에 어려움이 있다. 따라서, 본 연구에서는 적은 자료를 가지고 콘크리트의 실제적인 압축강도 추정을 위해 합리적인 베이시안 기법을 도입하여 콘크리트 강도추정 방법을 제시하였다. 여기서, 콘크리트의 평균 압축강도는 확률변수로 고려한다. 콘크리트 압축강도의 베이시안 업데이팅을 위해 사전확률분포는 기존의 자료를 반영하여 표현하며, 우도함수는 측정치의 특성을 반영하였다. 사후확률분포는 사전확률분포와 우도함수를 조합하여 나타내었다. 콘크리트 교량 현장에서 제작한 실린더 공시체로부터 측정한 자료를 이용하여 수치해석을 수행하였다. 수치해석결과는 상대적으로 적은 개수의 측정자료를 사용하고도 실제에 가까운 사후확률분포를 추정할 수 있는 것을 보여 주고 있다. 또한, 우도함수 분포의 신뢰구간에 대한 사전확률분포의 신뢰구간의 상대적인 크기는 사후확률분포의 결정에 영향을 미치는 것으로 나타났다. 본 논문에서 제시된 방법은 적은 현장측정자료를 가지고도 합리적인 강도추정이 가능함을 보여주고 있으며, 실제에 유용하게 활용될 수 있을 것으로 사료된다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 세계 도시지반공학 심포지엄
• /
• pp.1065-1078
• /
• 2009

The shear strength has been managed as an important factor in soil mechanics. The shear strength estimation model was developed to evaluate the shear strength using only a few soil properties by the linear regression analysis model which is one of the statistical methods. The shear strength is divided into two part; one is the internal friction angle ($\Phi$) and the other is the cohesion (c). Therefore, some valid soil factors among the results of soil tests are selected through the correlation analysis using SPSS and then the model are formulated by the linear regression analysis based on the relationship between factors. Also, the developed model is compared with the result of direct shear test to prove the rationality of model. As the results of analysis about relationship between soil properties and shear strength, the internal friction angle is highly influenced by the void ratio and the dry unit weight and the cohesion is mainly influenced by the void ratio, the dry unit weight and the plastic index. Meanwhile, the shear strength estimated by the developed model is similar with that of the direct shear test. Therefore, the developed model may be used to estimate the shear strength of soils in the same condition of study area.

• 한국안전학회지
• /
• 제10권2호
• /
• pp.10-16
• /
• 1995

In estimating the fatigue data, only the uniform safety rate has been applied so far However, since more reasonable design concepts such as machine structures or subsidiary materials will be required in the future, the importance of a statistical estimation method for fatigue data is being highlighted. With such basic conception in mind, this study was aimed at critically discussing the interval estimation method which has been applied using the classical statistics thus far It was conceived that this conventional method would result in the estimation of the unstable side from the viewpoint of the likelihood Interval estimation method. In this regard, this study aimed at estimating the fatigue strength through the likelihood interval estimation method comparing it with the conventional interval estimation method would result in the estimation of the unstable side from the viewpoint of the likelihood interval estimation method. One of the methods using the likelihood for estimation data is the Bayes method. Based on this theory, statistical estimations were positivly applied, and thereupon, the fatigue data were estimated.

• 터널과지하공간
• /
• 제28권1호
• /
• pp.72-96
• /
• 2018

암반에서 공사를 수행하는 경우에는 공사의 안정성 확보를 위하여 대상 암반의 일축압축강도를 정확히 평가해야 한다. 그러나 일축압축강도를 산정하기 위해서는 많은 비용과 시간이 필요하다. 또한 현장에서는 암석의 일축압축강도시험을 수행할 수 없다는 문제점이 있다. 이러한 문제를 해결하기 위해 점하중강도 시험을 이용하여 암석의 일축압축강도를 산정하는 방법이 외국의 많은 연구자들에 의하여 조사되었다. 그러나 외국의 암석에서 얻어진 연구결과를 그대로 국내에서 적용하는 것은 신뢰성에 문제가 있을 수 있다. 본 연구에서는 국내 암석에 대한 점하중강도지수와 일축압축강도의 상관관계를 광범위한 국내 외 문헌조사와 실내시험 결과를 통하여 도표로 제시하였다. 본 연구결과는 국내 암석의 일축압축강도를 간편하고 신속하게 추정하는데 활용될 수 있을 것으로 기대된다.

• International Journal of Aeronautical and Space Sciences
• /
• 제15권4호
• /
• pp.383-395
• /
• 2014

According to the requirement of wing weight estimation and frequent adjustments during aircraft conceptual design, a wing weight estimation method considering the constraints of structural strength and stiffness is proposed to help designers make wing weight estimations rapidly and accurately. This method implements weight predictions on the basis of structure weight optimization with stiffness constraints and strength constraints, which include achievement of wing shape parametric modeling, rapid structure layout, finite element (FE) model automated generation, load calculation, structure analysis, weight optimization, and weight computed based on modeling. A software tool is developed with this wing weight estimation method. This software can realize the whole process of wing weight estimation with the method and the workload of wing weight estimation is reduced because much of the work can be completed by the software. Finally, an example is given to illustrate that this weight estimation method is effective.