• The Journal of the Korea Contents Association
• /
• v.16 no.11
• /
• pp.346-357
• /
• 2016

The purpose of this study is to develope a case management education program for employees in the long-term mental health care facilities to reflect strength perspective and analyze the program's effectiveness. The participants in this study were 30 employees working in the long-term mental health care facilities in Seoul and Gyeong-gi regions(15 each), and the program's effectiveness was verified with those participants. The total 13 sessions of the education program was offered: three hours per session, and one session a month. The perception on clients(social distance, attitude towards mentally disorder people) and workers' competence(burnout, empowerment) were used as the measuring tool to verify the effectiveness of case management education. For data analysis, technical statistics and t-test were used in this study. As a result of the analysis, the social distance between the employees in the long-term mental health care facilities who participated in the case management education and clients decreased in relation with perception on clients, and attitude score towards clients improved. It was also verified that burnout decreased, and that empowerment improved in relation with the competence of the employees in the long-term mental health care facilities.

• Journal of Korean Society for Quality Management
• /
• v.20 no.2
• /
• pp.21-32
• /
• 1992

The only property of the random stresses to affect the life length are their damage amount and are independent of the especial realization in stress case. This paper shows the result is discussed that the randomness of the life length is caused by the randomness of the strength rather than by the randomness of the stress when the load is a random function and the strength is random as well. This special model is well-suited model for comparative calculations since it connects fatigue life for random stresses to fatigue life for periodically curve loads, which is usually measured in experiments.

• Proceedings of the Safety Management and Science Conference
• /
• 2008.11a
• /
• pp.623-631
• /
• 2008

In this study, with the objects of 173 institutions of university and research institutions, investigation was carried out through visit investigation and questionnaire investigation. Frequency and strength of occurrences was acquired mainly through universities and research institutions which have reported occurrences of accidents to the Ministry of Education, Science, and Technology. Quantitative danger evaluation was conducted through frequency and strength of occurrences. Case study was carried out by selecting bio science laboratory of university and as the result of this study, degree of danger among the inspection objects of bio science laboratories, laboratory work place was evaluated as the most dangerous with the scores of 155.00 and as the result of average danger level, compression gas cylinder was evaluated as the most dangerous with the scores of 6.4000.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2018.05a
• /
• pp.169-170
• /
• 2018

The purpose of the research is suggesting the temperature compensation strength for Unicode of constructure standard from Ministry of land, infrastructure and transport. As a result, for the concrete mixture with 100 % OPC, 6, and 3 MPa of compensating strength values were necessary when the temperature were from 4 to 9℃, and from 9 to 17℃, respectively. Additionally, when the temperature was higher than 17℃, compensating strength value was not necessary. In the case of 20 % of blast furnace slag replaced concrete mixture, 9, 6, and 3 MPa of compensating strength values were necessary when the temperature were from 4 to 6℃, from 6 to 12℃, and higher than 17℃, respectively.

• International conference on construction engineering and project management
• /
• 2009.05a
• /
• pp.794-799
• /
• 2009

The temperature control of in-place concrete is the most important factor for an early age of curing concrete. Heat stress of mass concrete caused by the heat of hydration can induce the crack of concrete, and a frost damage from cold weather casting concrete results defect on compressive strength and degradation of durability. Therefore, success and failure of concrete work is dependant on the measurement and control of concrete temperature. In addition, the compressive strength assessment of in-place concrete obtained from the maturity calculated from the history of temperature make a reduction of construction cycle time, possible. For that purpose, wireless temperature measuring system was developed to control temperature and assess strength of concrete. And, it was possible to monitor the temperature of concrete over 1km apart from site office and to take a proper measure; mesh-type network was developed for wireless sensor. Furthermore, curing control system that contains the program capable to calculate the maturity of concrete from the history of temperature and to assess the compressive strength of concrete was established. In this study, organization and practical method of developed curing control system are presented; base on in-place application case.

• Journal of the Korea Safety Management & Science
• /
• v.17 no.4
• /
• pp.397-401
• /
• 2015

In this study, analysed the characteristics of power drop and surface damage in solar cell through high temperature and humidity test in the 3 case of EVA(ethylene vinyl acetate) and 2 case ribbon thickness. The solar cells were tested during the 500hr in $85^{\circ}C$ temperature and 85% relative humidity conditions, that excerpted standard of PV Module(KS C IEC-61215). Through the EL(Electroluminescence) shots, specimen's surface have partialy damaged. Before and after high humidity and high temperature test, ribbon thickness $200{\mu}m$ EVA1 case power drop rate was 8.463%, EVA2 case was 6.667%, EVA3 case was 6.373%. In the ribbon thickness $250{\mu}m$ EVA1 case power drop rate was 6.521%, EVA2 case was 8.517%, EVA3 case was 6.019%. EVA3 case was the lowest power and FF(fill factor) drop rate at the 2 case of ribbon thickness, because EVA3 is laerger than EVA1 and EVA2 in thickness, elongation and tensile strength.

• International conference on construction engineering and project management
• /
• 2009.05a
• /
• pp.883-889
• /
• 2009

The importance of cost estimate in early stage such has been increasing due to market change and severe competition in construction industry. Because the adjustable budget is only 20% after design stage, most of the crucial decisions to influence cost is made in the early stage. However, in the early stage, the project scope is not defined completely so that estimator has inaccurate information to make critical decision. Therefore, this research suggests the cost estimate method using case-based reasoning. Case-based reasoning is appropriate for the early cost estimating, as it has the strength of rapidity and convenience in cost estimation. This research analyzes 84 actual data of public apartment on the scale of 11~15 stories. In order to extract the most similar case, at the first step this research identifies influence factors and calculates attribute similarity. In case-based reasoning, the most challenging task is determining attribute weight. At the third step, this research calculates case similarity which is aggregated attribute similarity multipled by attribute weight. Finally, extracts the most similar case which has the highest score of case similarity.

• Journal of the Korean Society of Safety
• /
• v.26 no.3
• /
• pp.8-14
• /
• 2011

The live-line works are very dangerous because of direct contacts with the distribution line or neighboring contacts. So the purpose of this study is to identify the risk factor by accident occurrence form and accident case analysis, and to suggest the quantified risk index by risk occurrence frequency and risk strength analysis. And the risk index assessment is researched by accident cases analysis on work type. Accident cases of transmission distribution line are researched based on data of the Ministry of Employment and Labor in the last ten-year period (2000~2009). In results of this paper, high risk isn't always a priority of safety measures. Risk occurrence frequency and risk strength have to be considered according to detail work types, work methods and conditions of field work. And safety management measures must be planned according to risk occurrence frequency and risk strength.

• Journal of the Korean Society for information Management
• /
• v.27 no.3
• /
• pp.265-281
• /
• 2010

The proposed method in this study is the Maximal Concept-Strength Recognition Method(MCR). In case that we don't know which database is the most suitable for automatic-classification when new database is imported, MCR method can support to select the most similar database among many databases in the legacy system. For experiments, we constructed four heterogeneous scholarly databases and measured the best performance with MCR method. In result, we retrieved the exact database expected and the precision value of MCR based automatic-classification was close to the best performance.

• Journal of Korean Society for Quality Management
• /
• v.9 no.1
• /
• pp.3-11
• /
• 1981

A stress-strength model is formulated for s of k systems consisting of identical components. We consider minimum variance unbiased (MVU) estimation of system reliability for data consisting of a random sample from the stress distribution and one from the strength distribution when the two distirubtions are Weibull with unknown scale parameters and same known shape parameter. The asymptotic distribution of MVU estimate of system reliability in the model is obtained by using the standard asymptotic properties of the maximum likelihood estimate of system reliability and establishing their equivalence. Uniformly most accurate unbiased confidence intervals are also obtained for system reliability. Empirical comparison of the two estimates for small samples is studies by Monte Carlo simulation.