• 사회복지연구
• /
• 제43권1호
• /
• pp.275-304
• /
• 2012

이 연구는 영유아빈곤가정을 대상으로 강점관점 사례관리를 적용한 실천 경험을 분석하였다. 사례관리 실천 과정에서 경험하였던 도전과 극복, 그리고 성과에 대하여 사례관리자의 관점에서 어떻게 인식되고 경험되었는지를 해석하는 데 초점을 맞추었다. 자료수집방법은 영유아빈곤가정을 위한 강점관점 사례관리 프로젝트의 사례관리자 총 10명을 대상으로 포커스 그룹 인터뷰를 사용하였다. 분석 결과, 강점원칙을 견지하면서 클라이언트와 지역사회차원에서 사례관리자의 인식과 실천의 변화가 일어났음을 알 수 있었다. 클라이언트의 변화능력과 강점을 인식하고, 클라이언트가 변화의 주체자임을 이해하며, 클라이언트와 우호적인 신뢰관계를 쌓아나갔다. 지역사회에서는 자원에 대한 인식이 확대되고 자원 발굴 및 지역기관과의 연계에 대한 적극적 노력이 일어났다. 인식과 실천의 변화를 토대로 클라이언트에게서는 건강한 주양육자로서의 성장, 지역자원의 획득 능력 향상, 이웃과 지역에 대한 공동체 의식 향상이라는 성과를 볼 수 있었다. 지역사회차원에서는 지역기관 사이의 협력 강화와 지역자원의 공유 확대, 지역 내 사례관리 역량 강화, 영유아영역에 대한 지역의 관심 증대 등의 성과가 파악되었다. 분석 결과를 토대로 강점관점 사례관리가 실천 현장에 정착되기 위해 필요한 실천 전략을 제시하였다.

• 품질경영학회지
• /
• 제24권3호
• /
• pp.19-30
• /
• 1996

We treat problems of estimating reliability R(t) = P[Y(t) ＞ X(t)] in the time dependent strength-stress model in which a unit of stress X(t) is subjected to environmental strength Y(t) at time t. In this paper we introduce a special model of R(t) with fixed strength and unaccumulated stress case, and propose a Mann-Whitney-Wilcoxon type estimator of R(t).

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2004년도 학술.기술논문발표회
• /
• pp.101-104
• /
• 2004

If predicting of compressive strength of construction in construction field at early age is possibile, rational strength management & schedule plan is possible. With method for predicting strength of concrete, many researchers have been making study of maturity method. On the other hand, nowadays rationalization of construction capacity and reduction of a term of works due to improvement of construction capacity and application of a new method of construction is gathering strength with important issue. In accordance with this present condition, construction is being progressed in winter, but proper construction mothed and countermeasure for strength management is not established in case of winter construction. Therefore to investigate application in construction field at winter of strength prediction model that developed at former study, this study aim to measure application of developed strength prediction model through manufacture of mock-up concrete according to kind of strength level at 5$^{\circ}C$.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2008년도 춘계 학술논문 발표대회
• /
• pp.79-82
• /
• 2008

It has been reported that destruction test by core collection is the most reliable of the structural concrete strength in present building construction field. But it causes low efficiency by damage and cutting in structure due to the core collection. It also has some problems in repairing. Additionally in case of strength test with management specimen, different environment compared to the structure environment cause problems about estimation precise structure strength. Therefore, it is required to develop structure direct strength test that has test values and credibility above the ones obtained by core specimen collection strength test and seasonal specimen test to suggest a reasonable and practical management method of structural concrete.

• 품질경영학회지
• /
• 제18권1호
• /
• pp.129-147
• /
• 1990

This study is to refer to the optimization problems when the stress and strength follow the time dependent model, considering a decision making process in the design methodology from reliability viewpoint. Reliability of a component can be expressed and computed if the probability distributions for the stress and strength in the time dependent case are known. The factors which determine the parameters of the distributions for stress and strength random variables can be controlled in design problems. This leads to the problem of finding the optimal values of these parameters subject to resources and design constraints. This paper is to present techniques for solving the optimization problems at the design stage like as minimizing the total cost to be spent on controlling the stress and strength parameters for random variables subject to the constraint that the component must have a specified reliability, alternatively, maximizing the component reliability subject to certain constraints on amount of resources available to control the parameters. The derived expressions and computations of reliability in the time dependent case and some optimization models of these cases are discussed. The special structure of these models is exploited to develop the optimization techniques which are illustrated by design examples.

• 품질경영학회지
• /
• 제44권3호
• /
• pp.509-526
• /
• 2016

Purpose: We would like to find the alternative method for the weathering test on rubber coated fabrics and adhesive-coated fabrics for the military products, KS M 0706 (Sunshine carbon arc) to KS M ISO 4892-2 (Xenon arc). Methods: We measured the tensile strength of adhesive-coated fabrics and adhesive products treated with sunshine carbon arc and xenon arc during 100, 150 and 200 hours, respectively. All of the results were treated with statistical test, ANOVA method. We also validate the surface modifications caused by treatment method and time by using FT-IR ATR and, SEM. Results: In case of the thick adhesive-coated fabrics (app. 1 mm), there was no distinctive difference on tensile strength by treatment method and time. In case of the thin mask hood (app. 0.22 mm) and TENT (app. 0.5 mm), there was distinctive difference on tensile strength. Especially, carbon arc showed a huge lowering properties. We could validate the curing from light and moisture, and the functional group change from cross-linking and oxidation using FT-IR ATR. In case of IBS, there was a surface cracks on SEM images. In case of mask hood, there was no distinctive differences, except for a particle falling from decreased affinity between rubber and particles caused by carbon arc. Conclusion: We concluded that there was no problems for changing xenon arc weathering test with same treatment time on IBS, KM7, K21 and adhesive products. In case of TENT and mask hood, there was a difference in tensile strength in accordance with the change of the treated time and method.

• 품질경영학회지
• /
• 제48권1호
• /
• pp.69-86
• /
• 2020

Purpose: This study aims to determine the optimal conditions for the spot welding process that mechanically connects the case of a cylindrical secondary battery and the negative tab. Methods: We use 33 factorial design to derive the optimal conditions for the spot welding process. The pulling strength, the cross-sectional area of nugget, and the shock test life are selected as response variables, which can represent the resistance welding quality. The input variables are selected as the welding time, welding voltage, and pressure, which are the controllable factors in the spot welding process. Results: The main effects of welding time and welding voltage and the interaction effect of welding time and welding voltage are significant. Conclusion: The optimal conditions for the spot welding process to mechanically join the negative electrode tab of the cylindrical secondary battery and the battery case are developed. The result shows that the pulling strength is increased by 44% compared to before improvement under optimal conditions.

• 기술사
• /
• 제33권1호
• /
• pp.83-88
• /
• 2000

Taguchi developed and provided various independent methods for actual application in design of experiments. Taguchi method is described in philosophy, method and others related to quality management. This thesis is one of case studies for improving the bond strength of epoxy resin by Taguchi method which is applied as a optimum developing tool in six sigma management revolution in many companies.

• 품질경영학회지
• /
• 제42권4호
• /
• pp.757-768
• /
• 2014

Purpose: In this paper we present a case study of developing fast curing adhesives for insulation material of LNG carriers using an extreme vertices design with four mixture components. Three material properties are considered - shear strength, viscosity, and tensile strength. In the optimization experiment, we used hardness instead of tensile strength due to shortage of specimens. Methods: We employ four-factor extreme vertices design with 19 runs and desirability function approach for simultaneously optimizing three responses. After selecting optimal condition of the mixture components, we do confirmation experiments to verify the reproducibility of the optimal condition under manufacturing circumstance. Results: Simultaneous optimal condition for the three responses, that is, shear strength, viscosity, and harness is obtained. At the optimal condition, confirmation experiments are executed in manufacturing circumstance. The variation for the shear strength is not satisfactory, which is due to the variation of the humidity. Conclusion: At the optimal condition three material properties are satisfactory. To reduce the variability for the shear strength, robust design is needed.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 춘계 학술발표회 제20권1호
• /
• pp.993-996
• /
• 2008

현재 건설현장에서 구조체 콘크리트 강도는 구조체에서 채취한 코어공시체 강도가 가장 신뢰성이 높다고 알려져 있다. 그러나 코어 채취시 구조체의 손상이나 배근의 절단에 의해서 구조체 성능의 지장을 줄 우려가 있고 공시체 채취후의 보수 등에 몇 가지 문제가 있다. 또한 비파괴 검사에 의한 경우 결과값을 추정하는 방법이기 때문에 신뢰도가 매우 저하되는 단점을 가지고 있다. 본 연구 개발의 목표는 접합 분리 시험체 및 콘크리트의 코어채취에 의한 직접적인 강도 측정방법과 계절별 관리용 공시체 강도를 비교분석하여 보다 발전된 구조체 콘크리트의 성능 평가방법을 제시하여 합리적이고 실용적인 구조체 콘크리트의 시공 품질관리 기법을 제안 하는데 목적이 있다.