• Structural Engineering and Mechanics
• /
• v.63 no.3
• /
• pp.361-370
• /
• 2017

Through the use of finite element analysis and acoustic emission techniques we have evaluated the interfacial failure of a carbon fiber reinforced polymer (CFRP) repair patch on a notched aluminum substrate. The repair of cracks is a very common and widely used practice in the aeronautics field to extend the life of cracked sheet metal panels. The process consists of adhesively bonding a patch that encompasses the notched site to provide additional strength, thereby increasing life and avoiding costly replacements. The mechanical strength of the bonded joint relies mainly on the bonding of the adhesive to the plate and patch stiffness. Stress concentrations at crack tips promote disbonding of the composite patch from the substrate, consequently reducing the bonded area, which makes this a critical aspect of repair effectiveness. In this paper we examine patch disbonding by calculating the influence of notch tip stress on disbond area and verify computational results with acoustic emission (AE) measurements obtained from specimens subjected to uniaxial tension. The FE results showed that disbonding first occurs between the patch and the substrate close to free edge of the patch followed by failure around the tip of the notch, both highest stress regions. Experimental results revealed that cement adhesion at the aluminum interface was the limiting factor in patch performance. The patch did not appear to strengthen the aluminum substrate when measured by stress-strain due to early stage disbonding. Analysis of the AE signals provided insight to the disbond locations and progression at the metal-adhesive interface. Crack growth from the notch in the aluminum was not observed until the stress reached a critical level, an instant before final fracture, which was unaffected by the patch due to early stage disbonding. The FE model was further utilized to study the effects of patch fiber orientation and increased adhesive strength. The model revealed that the effectiveness of patch repairs is strongly dependent upon the combined interactions of adhesive bond strength and fiber orientation.

• Journal of Life Science
• /
• v.15 no.5 s.72
• /
• pp.755-762
• /
• 2005

Biochemical amounts of RNA molecules can be synthesized in vitro, which is functionally equivalent or similar to those transcripts normally existing at extremely low levels in vivo. In this study we described a method for efficient preparation of pure T7 RNA polymerase from Escherichia coli strain BL21/pAR1219. The procedure, which used ammonium sulfate fractionation and preparative column chromatography on sephadex SP, was shown to be simple, rapid, and cost effective in comparison with other methods reported previously, Using the purified T7 RNA polymerase we were able to synthesize very long RNA transcript of 1.54 kb length, which is not feasible by conventional chemical synthesis. RNA molecule that was also synthesized by the purified T7 RNA polymerase, such as hammerhead ribozyme, retained its biochemical activity by cleaving the target RNA successfully in vitro. Thus, the procedure shown in this study can be useful to synthesize any length of RNA molecules in vitro in a simple and cost effective way for a variety of purposes.

• Journal of Life Science
• /
• v.18 no.6
• /
• pp.776-781
• /
• 2008

To develop natural food preservatives, methanol and water extracts were prepared from the Suaeda maritima and their antibacterial activities were examined against 12 microorganisms which were food borne pathogens bacteria, food poisoning microorganisms and food-related bacteria. Methanol extracts exhibited antibacterial activities for the 5 Gram positve and 7 Gram negative bacteria by agar diffusion method, The antibacterial activities and cell growth inhibition were investigated on each strain with the different concentrations of Suaeda maritima extracts. Antibacterial activities were shown in root, stem, furit extracts of Suaeda maritima. However stem and fruit extracts showed weak antibacterial activity against the tested microorganisms. Root extracts showed the highest antibacterial activities against microorganisms tested, such as Bacillus cereus,Bacillus subtilis, Vibrio parahaemolyticus, Staphylococcus aureus. The highest antibacterial activity against bacteria test was found in the methanol extract.

• Journal of Life Science
• /
• v.31 no.10
• /
• pp.960-968
• /
• 2021

Since microalgae research started on late 18 century, they have been recognized as one of the most important bioresources used in bioindustry. Owing to the large efforts paid to industrial application of this microorganisms, their importance on food/feed and bioactive compounds has been further extending into the environmental research areas including alternative energy resources, mitigation of the carbon emission, and waste-water treatment. However, despite the importance on their industrial application, the fundamental research field related to the long-term preservation of microalgae culture has not received much attention. However, a less labor intensive and cost-efficient preservation technology enabling biologically active and stable microalgae-culture provides a key success factor in the biotechnological application. Therefore, this study investigated various cutting-edge microalgae cryopreservation technologies currently developed so far, mainly targeting Chlorophyta, which occupies the largest taxon in the classification system of microalgae. In addition, for the development of successful cryopreservation technique, the key factors such as temperature control effect and preservative effect during cryopreservation of microalgae culture were investigated. In addition, the problems with current preservation technology that is being used in Korean domestic biological resource banks and the international microalgal resource banks are described. According to our investigation, currently no standard method for long-term preservation of microalgae is available due to their various morphological and physiological characteristics. To overcome such issues, much more efforts on fundamental research area on the identification of specific biomarker used for microalgae taxonomical classification and further systemic approaches based on strain-specific cryopreservation methods needed.

• Journal of fish pathology
• /
• v.34 no.1
• /
• pp.39-46
• /
• 2021

Tetracycline (TC) is one of the antibiotics used for treatment of bacterial infection in Korea. Inadequate usage and abuse cause the resistance to antibiotics, like Tetracycline, Erythromycin, and Fluoroquinolone. It can also affect severe economic loss in aquaculture field in Korea. We isolated 101 bacterial samples from diseased fish at aquaculture sites in Gyeonggi-do during 2015~2018. Minimum inhibitory concentration (MIC) method has been used to determine distribution and to identify bacterial isolates resistant to antibiotics including Oxytetracycline (OTC), Ampicillin (AMP), Clindamycin (CLI), Enrofloxacin (ENRO), Gentamycin (GEN). TC resistant isolates were confirmed antibiotic resistant genes by conventional PCR. Bacterial isolates were identified as Aeromonas spp. (43.5%), Pseudomonas spp. (4.0%) and Vibrio spp. (5.0%). It was confirmed that multi-resistant isolates (77.2%) were predominant over single-resistant one (22.8%). TC resistant genes like tet(A), tet(D), tet(E), tet(G), tet(M), and tet(S) were detected and tet(A) was the most prevalent. Aeromonas spp. is a dominant strain in bacterial infections in fishes of aquaculture sites, and further investigation on various antibiotic resistance genes will be needed for clear understanding of aquaculture sites in Gyeonggi-do.

• Journal of Life Science
• /
• v.31 no.8
• /
• pp.761-770
• /
• 2021

In this study, the optimal medium composition for enhancing protease production was established by the Bacillus strain isolated from Makgeolli, a traditional fermented food, using the response surface methodology. B. amyloliquefaciens SRCM115785 was selected as the protease producer by productivity analysis and identified by 16S rRNA gene sequencing. Plackett-Burman design (PBD) was introduced to analyze the effect of each component on protease production among the 11 selected medium components. As a result, glucose, yeast extract, and beef extract were finally selected as factors for enhancing protease production. Central composite design (CCD) analysis was designed as a method to determine the optimal concentration of each component for protease production and the concentration of each medium composition for maximum protease production was predicted to glucose 6.75 g/l, yeast extract 12.42 g/l and beef extract 17.48 g/l. The suitability of the experimental model was proved using ANOVA analysis and as a result of quantitative analysis to prove this, the amount of increase was 230.47% compared to the LB medium used as a control. Through this study, the optimization of medium composition for enhancing protease production was established, and based on this, it is expected that it can be efficient use of protease as an industrial enzyme.

• Current Research on Agriculture and Life Sciences
• /
• v.1
• /
• pp.151-158
• /
• 1983

This study was performed to obtain a basic materials for improvement of garlic storage ability. The "Namhae jaerae" of southern strain and the "Dalsung jaerae" of northern strain were harvested by period, their stems were cut at 7cm and 25cm from disk and then placed them in blast drying system 12 hours per day at $40^{\circ}C$ for 4 days, or in natural state. The decrease rate of bulb weight was compared and rooting, sprouting, the rate of decay was investigated between natural dry(conventional method) and hot-air dry (blast drying system). The results obtained were as follows. In the case of the decrease rate of bulb weight after hot-air dry; 7cm plot" "Namhae jaerae" was similiar to one of 13th day of natural dry and 25cm plot 14th day. In "Dalsung jaerae" 7cm plot of early, common and late harvest was respectively similiar to one of 22nd, 18th and 16th day of natural dry, 25cm plot of early, common and late harvest showed the same decrease rate of bulb weight as that of 18th, 16th and 14th day of natural dry respectively. In the case of rooting and sprouting in sand culture at the early period of storage, hot-air dry showed more prolonged tendency than conventional drying method. In the case of clove state in the latter period of storage, number of eatable cloves was more numerous and number of decayed cloves were less in blast drying system than in conventional method.

• Asian-Australasian Journal of Animal Sciences
• /
• v.13 no.11
• /
• pp.1619-1637
• /
• 2000

A review was undertaken to obtain information on the range of beak-trimming methods available or under development. Beak-trimming of commercial layer replacement pullets is a common yet critical management tool that can affect the performance for the life of the flock. The most obvious advantage of beak-trimming is a reduction in cannibalism although the extent of the reduction in cannibalism depends on the strain, season, and type of housing, flock health and other factors. Beak-trimming also improves feed conversion by reducing food wastage. A further advantage of beak-trimming is a reduction in the chronic stress associated with dominance interactions in the flock. Beak-trimming of birds at 7-10 days is favoured by Industry but research over last 10 years has shown that beak-trimming at day-old causes the least stress on birds and efforts are needed to encourage Industry to adopt the practice of beak-trimming birds at day-old. Proper beak-trimming can result in greatly improved layer performance but improper beak-trimming can ruin an other wise good flock of hens. Re-trimming is practiced in most flocks, although there are some flocks that only need one trimming. Given the continuing welfare scrutiny of using a hot blade to cut the beak, attempts have been made to develop more welfare friendly methods of beak-trimming. Despite the developments in design of hot blade beak-trimmers the process has remained largely unchanged. That is, a red-hot blade cuts and cauterises the beak. The variables in the process are blade temperature, cauterisation time, operator ability, severity of trimming, age of trimming, strain of bird and beak length. This method of beak-trimming is still overwhelmingly favoured in Industry and there appears to be no other alternative procedures that are more effective. Sharp secateurs have been used trim the upper beak of both layers and turkeys. Bleeding from the upper mandible ceases shortly after the operation, and despite the regrowth of the beak a reduction of cannibalism has been reported. Very few differences have been noted between behaviour and production of the hot blade and cold blade cut chickens. This method has not been used on a large scale in Industry. There are anecdotal reports of cannibalism outbreaks in birds with regrown beaks. A robotic beak-trimming machine was developed in France, which permitted simultaneous, automated beak-trimming and vaccination of day-old chicks of up to 4,500 chickens per hour. Use of the machine was not successful because if the chicks were not loaded correctly they could drop off the line, receive excessive beak-trimming or very light trimming. Robotic beak-trimming was not effective if there was a variation in the weight or size of chickens. Capsaicin can cause degeneration of sensory nerves in mammals and decreases the rate of beak regrowth by its action on the sensory nerves. Capsaicin is a cheap, non-toxic substance that can be readily applied at the time of less severe beak-trimming. It suffers the disadvantage of causing an extreme burning sensation in operators who come in contact with the substance during its application to the bird. Methods of applying the substance to minimise the risk to operators of coming in contact with capsaicin need to be explored. A method was reported which cuts the beaks with a laser beam in day-old chickens. No details were provided on the type of laser used, or the severity of beak-trimming, but by 16 weeks the beaks of laser trimmed birds resembled the untrimmed beaks, but without the bill tip. Feather pecking and cannibalism during the laying period were highest among the laser trimmed hens. Currently laser machines are available that are transportable and research to investigate the effectiveness of beak-trimming using ablasive and coagulative lasers used in human medicine should be explored. Liquid nitrogen was used to declaw emu toes but was not effective. There was regrowth of the claws and the time and cost involved in the procedure limit the potential of using this process to beak-trim birds.

• Journal of Life Science
• /
• v.20 no.3
• /
• pp.365-373
• /
• 2010

To monitor newly emerged influenza virus variants and to investigate the prevalence pattern, our laboratory performed isolation of the viruses from surveillance sentinel hospitals. In the present study, we analysed influenza A/H1N1, A/H3N2, B viruses isolated in Busan during the 2006/07 and 2007/08 seasons by sequence analysis of the hemagglutinin (HA1 subunit) and neuraminidase (NA) genes. The isolates studied here were selected by the stratified random sample method from a total of 277 isolates, in which 15 were A/H1N1, 16 were A/H3N2 and 29 were B. Based on the phylogenetic tree, the HA1 gene showed that A/H1N1 isolates had a 96.7% to 97.7% homology with the A/Brisbane/59/2007, A/H3N2 isolates had a 98.4% to 99.7% homology with the A/Brisbane/10/2007, and B isolates had a 96.5% to 99.7% homology with the B/Florida/4/2006(Yamagata lineage), which are all the vaccine strains for the Northern Hemisphere in 2008~2009 season. In the case of the NA gene, A/H1N1 isolates had 97.8% to 98.5% homologies, A/H3N2 isolates had 98.9% to 99.4% homologies, and B isolates had 98.9% to 100% homologies with each vaccine strain in the 2008~2009 season, respectively. Characterization of the hemagglutinin gene revealed that amino acids at the receptor-binding site and N-linked glycosylation site were highly conserved. These results provide useful information for the control of influenza viruses in Busan and for a better understanding of vaccine strain selection.

• Journal of Life Science
• /
• v.26 no.10
• /
• pp.1121-1129
• /
• 2016

High-molecular-weight glutenin subunits (HMW-GSs) are extremely important determinants of the functional properties of wheat dough. Transgenic rice plants containing a wheat TaGlu-Ax1 gene encoding a HMG-GS were produced from the Korean wheat cultivar ‘Jokyeong’ and used to enhance the bread-making quality of rice dough using the Agrobacterium-mediated co-transformation method. Two expression cassettes with separate DNA fragments containing only TaGlu-Ax1 and hygromycin phosphotransferase II (HPTII) resistance genes were introduced separately into the Agrobacterium tumefaciens EHA105 strain for co-infection. Rice calli were infected with each EHA105 strain harboring TaGlu-Ax1 or HPTII at a 3:1 ratio of TaGlu-Ax1 and HPTII. Among 210 hygromycin-resistant T₀ plants, 20 transgenic lines harboring both the TaGlu-Ax1 and HPTII genes in the rice genome were obtained. The integration of the TaGlu-Ax1 gene into the rice genome was reconfirmed by Southern blot analysis. The transcripts and proteins of the wheat TaGlu-Ax1 were stably expressed in rice T₁ seeds. Finally, the marker-free plants harboring only the TaGlu-Ax1 gene were successfully screened in the T₁ generation. There were no morphological differences between the wild-type and marker-free transgenic plants. The quality of only one HMW-GS (TaGlu-Ax1) was unsuitable for bread making using transgenic rice dough. Greater numbers and combinations of HMW and LMW-GSs and gliadins of wheat are required to further improve the processing qualities of rice dough. TaGlu-Ax1 marker-free transgenic plants could provide good materials to make transgenic rice with improved bread-making qualities.