• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.31 no.3 s.258
• /
• pp.322-330
• /
• 2007

This paper quantifies the effect of a bend angle of a pipe bend on plastic loads, via small strain and large strain FE limit analyses using elastic-perfectly plastic materials. To consider the effect of the attached straight pipe, two limiting cases are considered. One case corresponds to the pipe bend without the attached straight pipe, and the other to that with a sufficiently long attached straight pipe. For the former case, the FE results suggest that the limit load is not affected by the bend angle for both in-plane bending and internal pressure. For the latter case, however, the bend angle affects plastic loads. An interesting finding is that the plastic load smoothly changes from the limit load of the straight pipe when the bend angle approaches zero to the plastic load of the $90^{\circ}$ pipe bend when the bend angle approaches 90 degree. Based on such observations, closed-form plastic load solutions are proposed for the pipe bend with an arbitrary bend angle under in-plane bending and internal pressure.

• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.19 no.1
• /
• pp.55-61
• /
• 2013

Background: The purpose of this study was to investigate the immediate effects of mulligan's straight leg raise with traction technique on angle of passive straight leg raise and length of hamstring muscle in patients with low back and radiate pain. Methods: Thirty one subjects participated in this study. The subjects were assigned to either the low back pain group (n=17) or the radiate pain group (n=14). Subjects in both groups received 3 times mulligan's straight leg raise with traction. All subjects were examined for the range of motion of lower extremity. The range of motion of lower extremity was composed of angle on straight leg raise and 90-90 straight leg raise. The range of motion of lower extremity was measured using a goniometer. Results: After 3 times of mulligan's straight leg raise with traction, significant improvements on the angle of straight leg raise and 90-90 straight leg raise were observed in the both groups (p<.05). However, there are no significant difference was observed between groups. Conclusion: These results suggest that mulligan's straight leg raise with traction provides an immediately effective in range of motion of lower extremity in patients with low back pain as well as radiate pain. Although more research is required on the effects of long-term mulligan's straight leg raise with traction on range of motion of lower extremity, our results can be useful to establish the standard parameters for range of motion of lower extremity in the clinical setting.

• The Journal of Churna Manual Medicine for Spine and Nerves
• /
• v.8 no.1
• /
• pp.15-26
• /
• 2013

Objectives: The purpose of this study is to find out the relationship between lumbar lordotic angle and low back pain patterns. Methods: We randomly selected the 1191 patients (595 males, 596 females) who have visited Bu-Chun Jaseng Hospital of Korean Medicine with low back pain. We have taken lumbar x-ray films and measured their lumbar lordotic angle, the angle formed between L1 superior margin and S1 superior margin. We investigated 1191 patients' low back pain patterns(date of occurence, existence of radiating pain, trend of increasing pain with lumbar extention and flexion, trend of increasing pain with standing and sitting positions) and analysed the relationship between lumbar lordotic angle and low back pain patterns. Results: 1. The lumbar lordotic angle of the acute phase patient is more straight than the chronic one. 2. The lumbar lordotic angle of the patients with radiating pain is more straight than the patients without radiating pain. 3. At acute phase, the lumbar lordotic angle of the patients with increasing pain from lumbar extention is more straight than those with increasing pain from lumbar flexion. 4. At chronic phase, the lumbar lordotic angle of the patients with increasing pain from lumbar flexion is more straight than those with increasing pain from lumbar extention. Conclusions: There was a significant correlation between lumbar lordotic angle and low back pain.

• Journal of Mechanical Science and Technology
• /
• v.19 no.12
• /
• pp.2296-2302
• /
• 2005

This study is focused on the comparison of heat transfer performance of two thermosyphons having 60 straight and helical internal grooves. Distilled water has been used as working fluid. Liquid fill charge ratio defined by the ratio of working fluid volume to total internal volume of thermosyphon, the inclination angle and operating temperature were used as experimental parameters. The heat flux and heat transfer coefficient are estimated from experimental results. The conclusions of this study may be summarized as follows; Liquid fill charge ratio, inclination angle and geometric shape of grooves were very important factors for the operation of thermosyphon. The optimum liquid fill charge ratio for the best heat flux were $30\%$. The heat transfer performance of helically grooved tube was higher than that of straight grooved tube in low inclination angle (less than $30^{\circ}$), but the results were opposite in high inclination angle (more than $30^{\circ}$). As far as optimum inclination angle concerns, range of $25^{\circ}\~30^{\circ}$ for a helically grooved tube and about $40^{\circ}$ for a straight grooved tube are suggested angles for the best results.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.14 no.6
• /
• pp.63-68
• /
• 2015

Recently, 3D printer technologies have been used in many research efforts for high precision manufacturing. In particular, the rapid prototyping technology has been developing rapidly, because it can be manufactured in a short time with a 3D designed shape. This paper relates to the production characteristics of the straight bevel gear designed using a 3D print using the PolyJet method. The characteristics of a 3D printed straight bevel gear were compared with a machined straight bevel gear. The accuracy of the produced straight bevel gear was evaluated by backlash, meshing pattern, face angle, root angle, and surface roughness.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.05a
• /
• pp.604-609
• /
• 2002

In development of an advanced bicycle simulator, the investigation of the interactions between bicycle and rider during cycling is paramount important because bicycle is a two-wheeled human-powered vehicle. Tn this work, the tilt stability. among various interactions, of bicycling is investigated experimentally, In the experiments, the tilt angles of the bicycle, riders body and head are measured, as the riding p;1th and the speed are varied. Subjects are asked to ride along four typical paths on rigid flat ground : the straight, C-curved, S-curved and circle paths. The results from extensive experiments with different subjects can be summarized as : 1) The tilt angles of bicycle and rider are almost out of phase during pedaling along the straight path. 2) The bicycle tilt angle is nearly proportional to the square of bicycle speed for the straight and curved paths, and to the curvature for the curved paths. The head tilt angle is the biggest and the body tilt angle is the smallest for the straight path, but the tendency is reversed for the C-curved path. During the curve maneuvering, the rider's head tends to tilt by less than 40% of the bicycle tilt angle.

• International Journal of Costume and Fashion
• /
• v.5 no.1
• /
• pp.1-13
• /
• 2005

Two hundreds of female aged 19 years old and up were recruited to evaluate the postural changes and bilateral variation of asymmetry over age. To find out the differences among the age group, subjects were classified into 5 groups, early young age(19-29), late young age(30-39), early middle age(40-49), late middle age(50-59), and old age(60-). 35 body measurements were taken by the 3-D body scanner which allowed us to take measurements which cannot be measured using traditional methods, including the shape of a cross section, slice area surface are, and volume. Bilateral variations were observed as a function of age; Depth of scapular point level, scapular point to center back, and blade angle. Postural change of anterior cervical angle, upper anterior thoracic angle, upper posterior thoracic angle, posterior cervical angle, and center back/center front ratio were also exhibited. In each measurements, subjects were classified into normal, and abnormal group. Percentiles of abnormal in shoulder line angle, blade angle, neck point $\∼$ acromial point $\∼$ scapular point, posterior cervical angle, and upper posterior thoracic angle were increased over age group. The upper body of lateral view was classified into 3 types of posture based on the previous research; straight, erect(leaning back), and stooped(bent forward). The percentiles of subjects who have straight postures were decreased as a function of age, but those of stooped postures were increased. Subjects who have erect postures did not so. The stooped posture group shows the big cervical fossa angle, anterior cervical angle, posterior cervical angle, upper posterior thoracic angle, and the small upper anterior thoracic angle comparing to the straight and erect posture group. These results could be apply for clothing construction reflecting the changes in back, shoulder, neck, and the bilateral asymmetry according to the target age group.

• Korean Journal of Applied Biomechanics
• /
• v.12 no.2
• /
• pp.109-130
• /
• 2002

The purpose of this paper was to make a comparative analysis for the difference of the various kinematic variation which is occurred in the each situation when pitchers throw a straight and a curve ball. Four pitchers, who are two national team players and two high level pitchers, were selected among the right over hand pitchers of D university in the Busan for this paper. The data were analyzed by using 3D equipment. The results of the analysis which was about the elapsed time of the pitching, the movement of the body center-point, the highest height of the left knee, stride length, knee joint angle, shoulder joint angle, elbow joint angle and wrist joint angle in the each section(ST, LKU, HBP, LCF, MCP, BRP) were as follows : 1. Pitching time in the each section and step in the pitching for straight and curve ball was similar. The total elapsed time of the straight and curve ball was 1.78${\pm}$0.07sec and 1.77${\pm}$0.11sec in the order. 2. The position change of the body center to the Z(above below) direction did not show significant difference in the each situation of the section and step between pitching for the straight and curve ball. 3. Height of the left knee did not show significant difference as 125.38${\pm}$11.85cm and 124.95${\pm}$11.63m in the each pitching motion for straight and curve ball. The rate(%H) between height and stride length showed 68.42${\pm}$5.53(%H), 68.40${\pm}$5.45(%H) in the each pitching motion. 4. Pitching for curve ball showed longer stride length than pitching for straight ball that as the stride length was 140.35${\pm}$4.96cm and 144.8${\pm}$1.69cm. The rate(%H) between height and stride length showed 76.9${\pm}$3.77(%H), 79.39${\pm}$2.23(%H) in the each pitching motion. 5. Left knee joint angle did not show significant difference in the ST, LKU and HBP section in the each pitching motion. However, it was shown that knee joint angle was flexed much more in the LFC, MCP and BRP section in the pitching for curve ball. 6. Right shoulder joint angle did not show significant difference in the ST, LKU and HSP section. However, when pitches threw a curve ball in the LKU section. In the LFC section, the right shoulder joint angle was extended much more in the pitching for curve ball, and the angle was extended much in the MCP and BRP section in the pitching for curve ball than straight ball. 7. Right elbow joint angle did not show significant difference in the ST, LKU and HRP section in the two pitching motion. The angle had more flexion in the LFC and MCP section in the pitching for curve ball than the pitching for straight ball. The angle in the each pitching motion for straight ball and curve ball were extended by a narrow margin in the BRP section. 8. Right wrist joint angle was extended much more in the LFC and MCP section in the pitching for curve ball. In the BRP section, the angle was extended much more in the pitching for straight ball than curve ball.

• Korean Journal of Applied Biomechanics
• /
• v.22 no.3
• /
• pp.269-276
• /
• 2012

The purpose of This study's aim is to examine the difference in the changes of body segment movement, variables for ball quality, and carry at golf driver swing according to the ball quality using comparative analysis. Regarding the impact variables according to the ball quality using the track man and carry, club speed was the fastest at draw shot, ball speed was the fastest at straight shot, and smash factor was the lowest at draw shot. About the vertical launch angle, the fade shot showed the highest launch angle while the max height of the ground and ball was the highest at fade shot. And carry was the longest at draw shot. For the flight time, it was the longest at draw shot. The landing angle was the largest at fade shot. About the club head position change and trajectory, at the overall event point, the fade shot drew a more outer trajectory at the point of the follow through(E6) than the straight or draw shot. Regarding the angular speed of shoulder rotation, at the overall event point, the fade shot showed the greatest angular speed change in the follow through(E6). Also, about the angular speed of pelvic rotation, at the overall event point, the draw shot showed the greatest angular speed change at the point of down swing(E4). Concerning the stance angle change, both straight and fade shots were open as the concept of open stance whereas the draw shot was close as that of close stance. Regarding the previous study, the most important factor of deciding Ball Quality is the club face angle's open and close state at Impact. In short, the Ball Quality and carry were decided by this factor.

• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.23 no.1
• /
• pp.73-78
• /
• 2017

Background: The purpose of this study was to identify the effects of morphological Change of cervical spine to apply to neck retraction and extension regarding the straight deformity of cervical spine. Methods: A 40-year male subject with straight deformity of cervical spine participated in this study. The study subject underwent a cervical lateral radiography on the static position, neck retraction and neck extension on standing. Measurement method were using computer-based digital radiogram on a picture achieving computer system forthe centroid method, Cobb's angle and Jackson's angle. Results: Neck retraction was increased kyphosis on the C2-4 with lordosis on the C5-7. Neck extension was increased lordosis on the C2-7. Conclusions: These findings suggest that neck retraction was increased kyphosis and neck extension was increased lordosis based on the straight deformity of cervical spine. Therefore, we should be consider that neck extension exercise when increased lordosis for the patients of straight deformity of cervical spine.