• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2019.11a
• /
• pp.249-251
• /
• 2019

In the ongoing standardization of Versatile Video Coding (VVC), DCT-2, DST-7 and DCT-8 are designated as the vital primary transform kernels. Due to the effectiveness of DST-4 and DCT-4 in smaller resolution sequences, DST-4 and DCT-4 transform kernel can also be used as the replacement of the DST-7 and DCT-8 transform kernel respectively. While storing all of those transform kernels, ROM memory storage is considered as the major issue. So, to deal with this scenario, a unified DST-3 based transform kernel derivation method is proposed in this paper. The transform kernels used in this paper is DCT-2, DST-4 and DCT-4 transform kernels. The proposed ROM memory required to store the matrix elements is 1368 bytes each of 8-bit precision.

• Proceedings of the KIEE Conference
• /
• 2006.04b
• /
• pp.307-309
• /
• 2006

There are operated the six thousand train in the interior of a country. 95% of them are possible usage of resuscitation. Especially, Among them VVVF-Inverter vehicle has a merit of the highest recycle rate. but we don't use a apt recycled energy. Although the existing recycle energy used inverter method supply with electric power, it is decided in accordance with the state of sources. So efficiency of recycled electric power is of poor quality and catenary-voltage-fluctuation be generate because of recycled electric power. and it is able to affect system of safety train service. We'll research the method of supply according to wire condition after storing recycle energy made during train's stopping relation to Advanced EMU Research. Those methods are divided SMES, Fly-Wheel and Supercapacitor, and Considering the both economical efficiency and system application, we'll develop recycle energy storage system suitable our country condition.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.49 no.12
• /
• pp.643-650
• /
• 2000

Using neural network approach, the diagnosis of faults in industrial process that requires observing multiple data simultaneously are studied. Two-stage diagnosis is proposed to analyze system faults. By using neural network, the first stage detects the dynamic trend of each normalized date patterns by comparing a proposed pattern. Instead of using neural network, the difference between stored fault pattern and real time data is used for fault diagnosis in the second stage. This method reduces the amount of calculation and saves storing space. Also, we dealt with unknown faults by normalizing the data and calculating the difference between the value of steady state and the data in case of fault. A model of tank reactor is given to verify that the proposed method is useful and effective to noise.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.48 no.4
• /
• pp.303-307
• /
• 2003

Some Compositae plants are known to contain biologically active substances that are allelopathic to weeds species as well as antioxidant to foods. Aqueous extracts from leaves of 3 plant species, Cirsium japonica, Kalimeris yomena, and Lactuca saliva, were bioassayed against alfalfa (Medicago saliva) to determine their allelopathic effects. The extracts applied on filter paper in bioassay significantly inhibited root growth of alfalfa. Extracts of 20 g dry tissue $\textrm{L}^{-1}$ from Lactuca sativa showed the most inhibitory effect on alfalfa seedling growth and followed by Cirsium japonica and Kalimeris yomena. Oxidative stability by Rancimat method and antioxidant activity by TBA method for the ground samples were the greatest in Lactuca sativa although were less than that of a commonly used antioxidant, 1% ascorbic acid. Antioxidant activity of methanol extracts on storing meat was stably kept for 28days and was excellent compared to control. These results suggest that three Compositae plants have potent allelopathic and antioxidant effects, and that their activities differ, depending on plant species.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1998.04a
• /
• pp.75-80
• /
• 1998

Statistical Energy Analysis(SEA) has been considered as a possible method for predicting responses of complex structures, especially at higher frequencies. In this paper, an SEA model of vehicle was built using 138 energy storing subsystems connected together using 1019 junctions. SEAM software program was used to build and calculate the model. To demonstrate the accuracy of the SEA model, predicted response levels were compared with measured levels. The source input levels were measured at the engine mounting parts. For the vibration levels, the agreement between the calculation results and the experimental ones was found to be good. The energy flow between connected subsystems can be presented, because the analysis method is based on the estimation of the power flow between subsystems. This paper also identifies some dominant energy flow paths from sources. It is finally presented that the SEA model can optimize the design parameters of vehicles using model parameters and energy flow paths.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.48 no.9
• /
• pp.1161-1166
• /
• 1999

Delay testing has become highlighted in the field of digital circuits as the speed and the density of the circuits improve greatly. However, delay faults in sequential circuits cannot be detected easily due to the existence of state registers. To overcome this difficulty a new scan filp-flop is devised which can be used for both stuck-at testing and delay testing. In addition, the new scan flip-flop can be applied to both the existing functional justification method and the newly-developed reverse functional justification method which uses scan flip-flops as storing the second test patterns rather than the first test patterns. Experimental results on ISCAS 89 benchmark circuits show that the number of testable paths can be increased by about 10% on the average.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.1058-1059
• /
• 2015

This paper describes a low-voltage ride-through method for the permanent magnet synchronous generator (PMSG) wind turbine system at a grid fault. The generator side converter regulates the DC link voltage instead of the grid side converter by storing the surplus active power in the rotor inertia during grid fault by the sliding mode controller. The grid side converter controls the grid active power keeping a maximum power point tracking. Simulation results for small scale PMSG wind turbine verify the efficiency of the control method.

• Journal of The Korean Association of Information Education
• /
• v.3 no.1
• /
• pp.1-12
• /
• 1999

By recent advances in the information management tools, Education Softwares and Study Wares.are rapidly developed and distributed over the Internet very fast. As Education Administrative Information systems are developed, information generated from the education field is growing large and fast. In this paper, we suggest a method of efficiently storing and retrieving such information in the large data basis, in real time. We also demonstrate an information system by the proposed method.

• Agricultural and Biosystems Engineering
• /
• v.6 no.2
• /
• pp.77-82
• /
• 2005

The fractionation of green juice could be one of the ways to treat the green juice for saving the bio re-sources by using the basic processes of protein coagulation and separating juice coagulation into protein paste and brown juice and storing the final products. The fractionation of Chinese cabbage juice can be accomplished by applying the combine method of the formic acid with rate of 0.3% and the propionic acid with rate of 0.1 % added 4 hours later in the juice with maximum recovery of protein coagulation. The separation of coagulation into the protein paste and the brown juice completed in 6.5 hours by set up method in a special designed storage. The protein paste could be stored safely for 30days in anaerobic condition.

• Journal of the Semiconductor & Display Technology
• /
• v.6 no.2 s.19
• /
• pp.59-63
• /
• 2007

Radio Frequency Identification (RFID) is a common term for technologies using micro chips that are able to communicate over short-range radio and that can be used for identifying physical objects. RFID technology already has several application areas and more are being envisioned all the time. While it has the potential of becoming a really ubiquitous part of the information society over time, there are many security and privacy concerns related to RFID that need to be solved. This paper proposes a method which could protect private information and ensure RFID's identification effectively storing face feature information on RFID tag. This method improved linear discriminant analysis has reduced the dimension of feature information which has large size of data. Therefore, face feature information can be stored in small memory field of RFID tag. The proposed algorithm in comparison with other previous methods shows better stability and elevated detection rate and also can be applied to the entrance control management system, digital identification card and others.