• Journal of Mechanical Science and Technology
• /
• v.16 no.8
• /
• pp.1102-1108
• /
• 2002

In this study, a topological design sensitivity of the ai. bearing surface (ABS) is suggested by using an adjoint variable method. The discrete form of the generalized lubrication equation based on a control volume formulation is used as a compatible condition. A residual function of the slider is considered as an equality constraint function, which represents the slider in equilibrium. The slider thickness parameters at all grid cells are chosen as design variables since they are the topological parameters determining the ABS shape. Then, a complicated adjoint variable equation is formulated to directly handle the highly nonlinear and asymmetric coefficient matrix and vector in the discrete system equation of air-lubricated slider bearings. An alternating direction implicit (ADI) scheme is utilized for the numerical calculation. This is an efficient iterative solver to solve large-scale problem in special band storage. Then, a computer program is developed and applied to a slider model of a sophisticated shape. The simulation results of design sensitivity analysis (DSA) are directly compared with those of FDM at the randomly selected grid cells to show the effectiveness of the proposed approach. The overall distribution of DSA results are reported, clearly showing the region on the ABS where special attention should be given during the manufacturing process.

• The Journal of the Acoustical Society of Korea
• /
• v.11 no.2
• /
• pp.5-14
• /
• 1992

In the fields of astronomy, communication, X-ray crystallography, and engineering, it is a very important and useful fact that the original signal can be reconstructed from a partial information, only spectral magnitude or phase, of the signal. In this paper, we proposed a modified iterative algorithm to solve the Magnitude Retrieval Problem (MRP) for 1-D, 2-D signals. In oder to accelerate the convergence rate, the unit constant initial function which is used in the references is replaced by the exponential initial function for the modified adaptive iterative method. As a result, MRP with 1-D signal and low-pass detail image is significantly enhanced from an iterative convergence rate and a computer storage memory points of view.

• Journal of Mechanical Science and Technology
• /
• v.18 no.5
• /
• pp.820-829
• /
• 2004

The In-Containment Refueling Water Storage Tank (IRWST), one of the design improvements applied to the APR -1400, has a function to condense the high enthalpy fluid discharged from the Reactor Coolant System (RCS). The condensation of discharged fluid by the tank water drives the tank temperature high and causes oscillatory condensation. Also if the tank cooling water temperature approaches the saturated state, the steam bubble may escape from the water uncondensed. These oscillatory condensation and bubble escape would burden the undue load to the tank structure, pressurize the tank, and degrade its intended function. For these reasons simple analytical modeling and experimental works were performed in order to predict exact tank temperature distribution and to find the effective cooling method to keep the tank temperature below the bubble escape limit (93.3$^{\circ}C$), which was experimentally proven by other researchers. Both the analytical model and experimental results show that the temperature distributions are horizontally stratified. Particularly, the hot liquid produced by the condensation around the sparger holes goes up straight like a thermal plume. Also, the momentum of the discharged fluid is not so strong to interrupt this horizontal thermal stratification significantly. Therefore the layout and shape of sparger is not so important as long as the location of the sparger hole is sufficiently close to the bottom of the tank. Finally, for the effective tank cooling it is recommended that the locations of the discharge and intake lines of the cooling system be cautiously selected considering the temperature distribution, the water level change, and the cooling effectiveness.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.25 no.12
• /
• pp.693-699
• /
• 2013

This paper describes a method for size optimization of the major design variables for solar water heating systems at the stage of concept design. The widely used RETScreen simulation tool was used for optimization. Currently, the RETScreen tool itself does not provide a function for optimization of the design parameters. In this study, an optimizer was combined with the software. A comparative study was performed to evaluate the RETScreen-based approach with the case study of a solar heating system in an office building. The optimized results using the RETScreen model were compared to previously published results with the TRNSYS model. The objective function of the optimization is the life-cycle cost of the system. The optimized design results from the RETScreen model showed good agreement with the optimized TRNSYS results for the solar collector area and storage volume, but presented a slight difference for the collector slope angle in terms of the converged direction of the solutions. The energy cost, life-cycle cost, and thermal performance regarding collector efficiency, system efficiency, and solar fraction were compared as well, and the RETScreen model showed good agreement with the TRNSYS model for the conditions of the base case and optimized design.

• Journal of Platform Technology
• /
• v.12 no.1
• /
• pp.77-84
• /
• 2024

With the recent increase in the use of artificial intelligence, AI TRiSM data management within organizations has become important, and thus securing data reliability has emerged as an essential requirement for data-based decision-making. Digital content is transmitted through the unreliable Internet to the cloud where the digital content storage is located, then used in various applications. When detecting anomaly of data, it is difficult to provide a function to check content modification due to its damage in digital content systems. In this paper, we design a technique to guarantee the reliability of video data by expanding the function of data annotation. The designed annotation technique constitutes a prototype based on gRPC to handle a request and a response in a webUI that generates classification label and Merkle tree of given video data.

• Journal of Conservation Science
• /
• v.34 no.6
• /
• pp.443-458
• /
• 2018

An archive is a collection of documents or records. Currently, most archived documents are made of paper. Paper is susceptible to biological damage and deterioration due to its material properties. To control the biological damage, treatment with chemical disinfectants and control of the storage environment are often used. In government-controlled bulk public archives, all documents are chemically sterilized before storage. However, an extremely large quantity of public records have been produced, and storage space and conservation management are gradually reaching their limits. In this study, 60 species of microbes were identified using a genetic method. We successfully applied the adenosine triphosphate (ATP) bioluminescence method to detect microbial contamination on paper documents. A calibration curve of the ATP bioluminescence as a function of the microbe quantity was obtained, and the microbial activity on non-sterilized paper archives from 1951 was analyzed using an ATP luminometer. It was found that the microbial activity was suppressed or reduced in climate-controlled storage environments at $22^{\circ}C$ and 55% relative humidity. We anticipate that these results will be used to establish selective sterilization systems for government-controlled bulk public archives.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.10 no.6
• /
• pp.70-80
• /
• 2007

This study was surveyed from January to september, 2007 in order to evaluate the function of coastal wetland as a ecological axis in korea peninsula. Assessment was done by RAM (Rapid Assessment Method). RAM is consisted of total 8 contents and divided into high, moderate, low. The preservation grade of RAM is divided into 4 grades; absolute preservation, preservation, improvement and improvement or restoration. Throughout survey on total 14 wetlands of marine, estuary wetland and back marsh which are distributed in west coast in chung-nam province, their function was assessed. As result, total all the 14 wetlands were judged as preservation grade by assessment of 8 functional contents. The function of wetlands assessed as preservation grade showed high in water quality protection and improvement. Also, showed high in vegetation diversity, wildlife habitat and aesthetic recreation. Meanwhile, showed low in ground water recharge, Shoreline/Stream Bank Protection, Flood/Stormwater storage and Flood flow alteration. Of wetlands evaluated as preservation grade, Dae-ho, Sinduri, Bu-Nam lake, Sowhang dune and keum river estuary were assessed as absolute preservative area owing to habitation of international protection species and endangered species. These wetlands are essential to be managed continuously as a area having high ecological value. Farther, this wetlands will be done as a axis of ecological network related to land ecosystem.

• The Journal of Society for e-Business Studies
• /
• v.8 no.3
• /
• pp.87-105
• /
• 2003

Business Process Management (BPM) is an emerging trend of managing business process life cycles and integrating heterogeneous systems . Recently, BPM is considered as an essential element for automation of complex business processes involving many companies, particularly for those in an e-Business environment. In such an environment, it is very important for each business partner to trace history of resources. However, it has been a difficult problem for Workflow Management Systems(WFMSs) to support management of resource changes because of limited storage, complex process structure, and absence of formal change model. In this paper. a new framework is proposed, which can support change management for documents, one of core resources of business process. Under a traditional WFMSs framework, all workflow components belong to either build-time or run-time function, and executions of workflow processes are performed by the two functions . To manage changes of documents while process executing. a new framework with additional component modules are required. A version control method is introduced for the purpose of managing document changes. The proposed method includes five models for document structure, process structure, association between process and document, version management, and efficient version storage. A prototype system is developed to demonstrate the effectiveness of the proposed models.

• The Korean Journal of Rheology
• /
• v.10 no.4
• /
• pp.227-233
• /
• 1998

The effects of 1 mol% N-benzylpyrazinium hexafluoroantimonate(BPH) as a thermal latent initiator and blend compositions composed of cycloaliphatic and DGEBA epoxies were investigated in the rheological properties and cure kinetics. Latent properties were performed by measurement of the conversion as a function of reaction time using isothermal DSC at $150^{\circ}C$ and $50^{\circ}C$ Rheological properties of the blend systems were investigated in terms of isothermal experiments using a rheometer. The gelation time was obtained from the evaluation of storage modulus (G'), loss modulus (G") and damping factor (tan$\delta$)). Cross-linking activation energy ($E_c$) was also determined from the Arrhenius equation based on gel time and curing temperature. As a result, the gel time and cross-linking activation energy increased with increasing DGEBA composition. The cure activation energies ($E_a$) were obtained by Kissinger method using dynamic DSC thermograms. In this work, the cure activation energy decreased with increasing CAE concentration, which might be resulted from the short repeat units, simple side-groups and viscosity of reaction media.edia.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.3
• /
• pp.29-35
• /
• 2012

In this paper, it is presented the method of image recovering which existing is only pixel processing, but suggesting method is concluding image clustering overlap degree after classfying around unit fixel to crowd pixel. Concluding overlap degree threshold value is after identifying pattern pixel and grasping geometry structure of sample pattern and deduction of deciding function. distinguishing feature space is above four dimension is reason of not visual observation of pattern structure. consideration of distribution structure is distance of center of crowd pixel, the number of each crowd pattern pixel and standard deviation. The over threshold value elimate the overlap image and the downward is recovered and established dynamic image. memory storage deduction of 20% and elevation of 15% performance is estimated in recovery of image.