• Nuclear Engineering and Technology
• /
• v.50 no.6
• /
• pp.815-819
• /
• 2018

In this study, criticality safety assessments of the potential for storing transuranic element (TRU) ingots via a pyroprocess were evaluated to determine the appropriate TRU storage design parameters, in this case the ratio of the TRU ingot height to the radius and the number of TRU ingot canisters stacked within a container. Various accident situations were modeled over a modeling period of 5 years for a cumulative inventory of TRU ingots with various water densities in submerged containers and with various pitches between the containers in the facility. Under these combinations, we calculated the threshold of TRU height and radius ratio depending on the number of canisters in a container to keep the stored TRU in a subcritical state. The ratio of the TRU ingot height to radius should not exceed 4.5, 1.1, 0.5, 0.3, and 0.2 for two, three, four, five, and six levels of stacked canisters in a container, respectively.

• Journal of Institute of Convergence Technology
• /
• v.2 no.1
• /
• pp.1-6
• /
• 2012

The cold chain system in South-East Asia is requiring to maintain freshness of refrigerated or frozen food. In this study, Thermal storage system using Phase change material (PCM) was developed and evaluated its performance about temperature and cold keeping time. For various application of cold chain system, we developed portable cold box, cold roll container and freezing station. Keeping time on laboratory tests of portable cold box in case of refrigeration and freezing were 6 hours and 4 hours, respectively. Cold container was developed to 2.5 ton scale. Evaluation in Indonesia, it was showed to keep the setting temperature of $-10^{\circ}C$ over 40 hours at $30^{\circ}C$ of ambient air. Freezing station using PCM was kept over 24 hours under $-20^{\circ}C$.

• The Journal of the Korea Contents Association
• /
• v.22 no.1
• /
• pp.646-655
• /
• 2022

This study was conducted to investigate the quality characteristics of Kimchi during fermentation and storage according to containers with native plant extract. The containers used in the experiment were antimicrobial polypropylene containers(KAPP) developed with the addition of native plant extracts, and it was tested by comparing the microbial changes and sensory characteristics of the existing commercial containers, such as polypropylene containers(KPP), stainless steel containers(KST), and porcelain containers(KPC). Change in total microbial cell were similar for each container. Coliform maintained the lowest level from 15 days after storage to 50 days. Leuconostoc spp. and Lactobacillus spp. showed a rapid increase in all four storage containers until the 15th day of storage and then decreased. The KAPP container maintained its highest level. The sensory evaluation was carried out on Kimchi optimal condition(storage 40 days). The sensory scores of KAPP were generally higher than those of other experimental samples in characteristics of appearance, odor, taste and overall preference. As a result, KAPP container has an excellent antibacterial effect as compared with the three commercially available storage containers, is effective for fermentation of lactic acid.

• IE interfaces
• /
• v.24 no.4
• /
• pp.362-372
• /
• 2011

Container pick-up scheduling problem is to minimize the total container handling time, which consists of the traveling distance and the setup time of yard cranes in a container yard. Yard cranes have to pick-up the containers which are stacked in the yard-bays to satisfy the work schedule requirement of quay crane, which loads and unloads containers on or from container ships. This paper allows the movement of multiple yard cranes among storage blocks. A mixed integer programming model has been formulated and a genetic algorithm (GA) has been proposed to solve problems of large sizes. Computational results show that the proposed GA is an effective method.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.33 no.2
• /
• pp.75-86
• /
• 2008

A remarshalling is one of the operational strategies considered importantly at a port container terminal for the fast ship operations and heighten efficiency of slacking yard. The remarshalling rearranges the containers scattered at a yard block in order to reduce the transfer time and the rehandling time of container handling equipments. This Paper deals with the rearrangement problem, which decides to where containers are transported considering time value of each operations. We propose the mixed integer programming model minimizing the weighted total operation cost. This model is a NP-hard problem. Therefore we develope the heuristic algorithm for rearrangement problem to real world adaption. We compare the heuristic algorithm with the optimum model in terms of the computation times and total cost. For the sensitivity analysis of configuration of storage and cost weight, a variety of scenarios are experimented.

• Journal of Korean Port Research
• /
• v.12 no.2
• /
• pp.195-206
• /
• 1998

By the rapid expansion of containerization and intermodal transportation in international shipping since the 1970's, the larger containerships have emerged and concentrated their calls at a limited number of ports. Moreover, large-scale container terminals have been built to accommodate the ever-larger containerships, and the mordernization of terminal facilities and many developments in information technology etc. have been brought out. Thus, unlimited competition has been imposed on every terminal with neighbouring ports in Japan, Singapore, Hongkong and Taiwan etc. The purpose of this study is to suggest how the container terminal operators cope with unlimited competition between local or foreign terminals. The results are suggested as follows: First, transshipment cargoes, which the added value is high, is to be induced. Second, the function of storage is given on On-Dock Yard. Third, Berth Pool Operation System is to be introduced, especially in Gamman Container Terminal and Kwangyang Container Terminal. Fourth, the cargo handling charges is to be decided by terminal operator.

• Nuclear Engineering and Technology
• /
• v.55 no.8
• /
• pp.3010-3016
• /
• 2023

In recent years, the development of radioactive waste containers for nuclear facility decommissioning and dismantling is a critical issue because the Taiwan domestic boiling water reactor nuclear power plant is going to be decommissioned. The main purpose of this research is to design a metal container that meets the structural requirements of related regulations. At first, the shielding analysis was performed by varying dimensions of radioactive waste to determine the storage efficiency of the container. Then, a series of structural analyses for operational and accidental conditions of the container with full load were conducted, such as lifting, stacking, and drop impact conditions. On the other hand, the field drop impact tests were carried out to ensure structural integrity. The present research demonstrates the structural safety of the developed container for decommissioned nuclear facilities in Taiwan.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.14 no.2
• /
• pp.53-64
• /
• 2008

This study is the architectural planning of 5 distribution supporting facilities for traditional herbal medicine cultivated in the rural areas. The main function of the facility consists of storage, pre-treatment/processing, loading/unloading and the assistant function consists of inspection, office, exhibition/sale, technical equipment etc. The planning shows the modular plan and the section plan of the storage space reflecting the shape and size of storage container, the action radius of carrier and the possibilities of space lease. The total floor area of the storage is 3,192$m^2$ consisting of 27 space. The total floor area of the pre-treatment/processing is 1,488$m^2$ consisting of 7 space. The total floor area of the loading/unloading is 329$m^2$ consisting of 4 space. The total floor area of each facility storage is 8,284$m^2$ including of public space 2,170$m^2$. Also this planning shows the preliminary design, "fundamental model design" for 5 rural government BTL project. Therefore, this result of planning will be the guidelines of the RFP(Request For Proposal) for the private sector company interested in this BTL project.

• Journal of the Korean Institute of Navigation
• /
• v.15 no.3
• /
• pp.13-24
• /
• 1991

This paper aims to determining the optimal capacity of Pusan port in view point of Container Physical Distribution cost. It has been established a coast model of the container physical distribution system in Pusan port is composed of 4 sub-systems and in-land transport system. Cargo handling system, transfer & storage system and in-land transport system, and analyzed the cost model of the system. From this analysis, we found that the system had 7 routes including in-land transport by rail or road and coastal transport by feeder ship between Pusan port and cargo owner's door. Though railway transport cost was relatively cheap, but, it was limited to choose railway transport routes due to the introducing of transport cargo allocation practice caused by shortage of railway transport capacity. The physical distribution ost for total import & export container through Pusan port was composed of 4.47% in port entring cost, 12.98% in cargo handling cost, 7.44% in transfer & storage cost and 75.11% in in-land transport cost. Investigation in case of BCTOC verified the results as follows. 1) The optimal level of one time cargo handling was verified 236VAN (377TEU) and annual optimal handling capacity was calculated in 516, 840VAN(826, 944TEU) where berth occupancy is $\rho$=0.6 when regardless of port congestion cost, 2) The optimal level of one time cargo handling was verified 252VAN (403TEU) and annual optimal handling capacity was calculated in 502, 110VAN (803, 376TEU) where berth occupancy is $\rho$=0.58 when considering of port congestion cost.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.46 no.1
• /
• pp.100-107
• /
• 2017

This study was conducted to evaluate the quality characteristics of got mul-kimchi during storage by type of kimchi container using a plastic ark shell. The pH level, acidity, hardness, color, sensory evaluation, and microbiological activity were performed. Kimchi containers were prepared with 0%, 2%, and 3% plastic ark shell. The pH level of 2% container samples showed no significant difference compared with that of the control, whereas pH levels of 3% container samples were significantly (P<0.05) higher than those of the control and 2% sample. Acidity was not different among treatments up to 4 weeks, whereas acidity of 3% container samples was significantly (P<0.05) lower than those of the control and 2% samples after 8 weeks. Hardness significantly decreased (P<0.05) upon 0, 2, and 3% treatments with increasing storage time, but there was no significant difference among the treatments. Hunter color L values increased in the order of 0, 3, and 2% with increasing storage time. In sensory evaluation of crunchiness, 3% container samples had significantly (P<0.05) higher crunchiness than the control. Total viable cells in the 3% container with got mul-kimchi were significantly (P<0.05) lower than those of other samples at 12 and 16 weeks of fermentation. Numbers of lactic acid bacteria in the 2% and 3% container samples were significantly (P<0.05) lower than those of the control samples after 16 weeks of fermentation. These results show that the plastic ark shell kimchi container extended storage compared with the control.