• Journal of Mechanical Science and Technology
• /
• v.16 no.8
• /
• pp.1102-1108
• /
• 2002

In this study, a topological design sensitivity of the ai. bearing surface (ABS) is suggested by using an adjoint variable method. The discrete form of the generalized lubrication equation based on a control volume formulation is used as a compatible condition. A residual function of the slider is considered as an equality constraint function, which represents the slider in equilibrium. The slider thickness parameters at all grid cells are chosen as design variables since they are the topological parameters determining the ABS shape. Then, a complicated adjoint variable equation is formulated to directly handle the highly nonlinear and asymmetric coefficient matrix and vector in the discrete system equation of air-lubricated slider bearings. An alternating direction implicit (ADI) scheme is utilized for the numerical calculation. This is an efficient iterative solver to solve large-scale problem in special band storage. Then, a computer program is developed and applied to a slider model of a sophisticated shape. The simulation results of design sensitivity analysis (DSA) are directly compared with those of FDM at the randomly selected grid cells to show the effectiveness of the proposed approach. The overall distribution of DSA results are reported, clearly showing the region on the ABS where special attention should be given during the manufacturing process.

• Food Science and Biotechnology
• /
• v.17 no.1
• /
• pp.90-94
• /
• 2008

Dynamic rheological properties of honey samples with 3 different moisture contents (17.2, 19.0, and 21.0%) were evaluated at various low temperatures (-15, -10, -5, and $0^{\circ}C$) using a controlled stress rheometer. The honey samples displayed a liquid-like behavior, with loss modulus (G") predominating over storage modulus (G') (G">>G'), showing the high dependence on frequency ($\omega$). The magnitudes of G' and G" decreased with an increase in temperature and water content while a predominant increase of G' was noticed at $-15^{\circ}C$. The time-temperature superposition (TTS) principle was applied to bring G" values for honeys at various temperatures together into a master curve. The G" over the temperature range of -15 to $0^{\circ}C$ obeyed the Arrhenius relationship with a high determination coefficient ($R^2=0.98-0.99$). Activation energy value (Ea=112.4 kJ/mol) of honey with a moisture content of 17.2% was higher than those (Ea=98.8-101.1 kJ/mol) of other honey samples with higher moisture contents.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.10 no.2
• /
• pp.193-205
• /
• 2008

The construction of underground structures such as oil and food storage caverns are recently increasing in our country. The stability of those underground caverns are greatly influenced by their shape and size. In this study therefore, the effect that the shape of an underground cavern have on its stability were analyzed in terms of safety factor. To this end, caverns with 5 different shapes were investigated and sensitivity analyses were performed based on rock class, overburden, and lateral earth pressure coefficient. The proper amount of shotcrete and rockbolt as supports of a cavern was also assumed based on the shape and site of the cavern and rock conditions. This study is expected to be helpful in designing and evaluating the stability of caverns in future.

• Tribology and Lubricants
• /
• v.23 no.6
• /
• pp.298-300
• /
• 2007

Frictional characteristics of mesoporous $SiO_2$ thin films were evaluated with different pore sizes. The films were manufactured by sol-gel and self-assembly methods to have a porous structure. The pores on the surface may play as the outlet of wear particle and the storage of lubricant so that the surface interactions could be improved. The pores were exposed on the surface by chemical mechanical polishing (CMP) or plasma-etching after forming the porous films. The ball-on-disk tests with mesoporous $SiO_2$ thin films on glass specimen were conducted at sliding speed of 15 rpm and a load of 0.26 N. The results show considerable dependency of friction on pore size of mesoporous $SiO_2$ thin films. The friction coefficient decreased as increasing the pore size. CMP process was very useful to expose the pores on the surface.

• Journal of international Conference on Electrical Machines and Systems
• /
• v.2 no.4
• /
• pp.460-465
• /
• 2013

Electrical equipments of nuclear power plant are divided into class 1E and non-class 1E. Electrical equipment and systems that are essential to emergency reactor shutdown, containment isolation, reactor core cooling, and containment and reactor heat removal, are classified as class 1E. batteries of nuclear power plant are divided into four channels, which are physically and electrically separate and independent. The battery bank of class 1E DC power system of the nuclear power plant use lead-acid batteries in present. The lead acid battery, which has a high energy density, is the most popular form of energy storage. Kt factor of lead-acid battery is used to determine battery size and it is one of calculatiing coefficient for capacity. this paper analyzes Kt factor of lead-acid battery for the DC power system of nuclear power plant. In addition, correlation between Kt parameter and peukert's exponent of lead-acid battery for nuclear plant are discussed. The analytical results contribute to optimize of determining size Lead-acid battery bank.

• International Journal of Air-Conditioning and Refrigeration
• /
• v.15 no.3
• /
• pp.108-113
• /
• 2007

The performance of a solar water heater incorporating evacuated tubes was evaluated using a transient simulation program, TRNSYS. Simulations were performed for $60^{\circ}C$ of hot water load temperature and for 280 liter of daily hot water volumes and three 400 liter of storage tank volumes. Three patterns of daily hot water consumption profile were used in the present study (morning, lunch and evening). The results show that the increase in solar fraction depends on the load profile, as well as the collector efficiency coefficient. Hot water draw profile has a large effect on the performance of the SDHWS, the morning load profile has the highest solar fraction. The annual solar fraction of the system, at the weather conditions of Jinju is approximately 84% at lunch load pattern, the 280 kg of load volume, 400 kg of tank volume and the $60^{\circ}C$ of load temperature.

• Journal of Mechanical Science and Technology
• /
• v.14 no.9
• /
• pp.985-996
• /
• 2000

The issue of quench is related to safety operation of large-scale superconducting magnet system fabricated by cable-in-conduit conductor. A numerical method is presented to simulate the thermal hydraulic quench characteristics in the superconducting Tokamak magnet system, One-dimensional fluid dynamic equations for supercritical helium and the equation of heat conduction for the conduit are used to describe the thermal hydraulic characteristics in the cable-in-conduit conductor. The high heat transfer approximation between supercritical helium and superconducting strands is taken into account due to strong heating induced flow of supercritical helium. The fully implicit time integration of upwind scheme for finite volume method is utilized to discretize the equations on the staggered mesh. The scheme of a new adaptive mesh is proposed for the moving boundary problem and the time term is discretized by the-implicit scheme. It remarkably reduces the CPU time by local linearization of coefficient and the compressible storage of the large sparse matrix of discretized equations. The discretized equations are solved by the IMSL. The numerical implement is discussed in detail. The validation of this method is demonstrated by comparison of the numerical results with those of the SARUMAN and the QUENCHER and experimental measurements.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.41 no.6
• /
• pp.634-639
• /
• 1996

This experiment was conducted to evaluate the variability of hypocotyl elongation of mungbean varieties. With four mungbean cultivars, which were classified as 4234-697 and Keumsungnogdu(long), Nampyungnogdu(Medium), and Seonhwanogdu(short), hypocotyl elong-ation was measured 4 to 6 days after seeding in paper towel at different temperatures (15, 20, 25, 30, and 35$^{\circ}C$). Hypocotyl elongation of mungbean seed stored at 5$\pm$1$^{\circ}C$ for 6 months was compared with of seed stored at room temperature. As the temperature rises, the hypocotyl is longer. The hypocotyl elongation started immediately at high temperature, and longest at the range of 30 to 35$^{\circ}C$. The hypocotyl elongation became longer at the 5$^{\circ}C$ storage plot than at the room temperature plot. Correlation coefficient (r) between 100 seed weight and hypocotyllength are not significant.

• Transactions on Electrical and Electronic Materials
• /
• v.15 no.6
• /
• pp.338-343
• /
• 2014

A $Fe_3O_4$-graphite nanofiber composite for use as an anode material was successfully synthesized by calcining $Fe_3O_4$ and graphite nanofiber (GNF) together in a $N_2$ atmosphere. Using this $Fe_3O_4$-GNF composite in a lithium ion battery resulted in a higher lithium storage capacity than that obtained using $Fe_3O_4$-graphite ($Fe_3O_4$-G). The $Fe_3O_4$-GNF (10 wt%) electrode exhibited a higher lithium ion diffusion coefficient ($2.29{\times}10^{-9}cm^2s^{-1}$) than did the $Fe_3O_4$-G (10%) ($3.17{\times}10^{-10}cm^2s^{-1}$). At a current density of $100mA\;g^{-1}$, the $Fe_3O_4$-GNF (10 wt%) anode showed a higher reversible capacity ($1,031mAh\;g^{-1}$) than did the $Fe_3O_4$-G (10%) anode ($799mAh\;g^{-1}$). Moreover, the $Fe_3O_4GNF$ electrodes showed good cycling performance without the addition of a conductive material.

• Journal of Korean Library and Information Science Society
• /
• v.13
• /
• pp.131-166
• /
• 1986

This study is designed to review the methods of duplicate copies decision making in the academic library. In this thesis, I surveyed queueing & markov model, statistical model, and simulation model. The contents of the study can be summarized as follows: 1) Queueing and markov model is used for one of duplicate copies decision-making methods. This model was suggested by Leimkuler, Morse, and Chen, etc. Leimkuler proposed growth model, storage model, and availability model through using system analysis method. Queueing theory is a n.0, pplied to Leimkuler's availability model. Morse ad Chen a n.0, pplied queueing and markov model to their theory. They used queueing theory for measuring satisfaction level and Markov model for predicting user demand. 2) Another model of duplicate copies decision-making methods is statistical model. This model is suggested by Grant and Sohn, Jung Pyo. Grant suggested a model with a formula to satisfy the user demand more than 95%, Sohn, Jung Pyo suggested a model with two formulars: one for duplicate copies decision-making by using standard deviation and the other for duplicate copies predicting by using coefficient of variation. 3) Simulation model is used for one of duplicate copies decision-making methods. This model is suggested by Buckland and Arms. Buckland considered both loan period and duplicate copies simultaneously in his simulation model. Arms suggested computer-simulation model as one of duplicate copies decision-making methods. These methods can help improve the efficiency of collection development and solve some problems (space, staff, budget, etc, ) of Korean academic libraries today.