• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07b
• /
• pp.751-755
• /
• 2003

In this paper, We proposed compact multi-layer LTCC (Low Temperature Cofired Ceramic) bandpass filter for Bluetooth module. A ${\lambda}/4$ coupled stripline resonators are designed, which composed of coupled strip-line section and loading capacitance. This resonator with a loading capacitor has slow-wave characteristics. Due to the slow-wave effect of the proposed resonator, it is possible to design and fabricate a compact bandpass filter with a wide upper stop band. Attenuation poles in the lower stop band are achieved using controlling of electro-magnetic coupling between resonators. Using multi-layer LTCC technology, we designed and fabricated band pass filter with a finite attenuation pole and wide upper stopband. The overall size of the filter is $1.2{\times}2.0{\times}1.0mm^3$.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.621-624
• /
• 1998

This paper presents a new configuration of dielectric bandpass filter using the comb-line filter design theory. This filter is composed of a homogeneous dielectric monoblock $(\varepsilonr=35.5)$ with two metal post and a dielectric sheet $(\varepsilonr=9.8).$ In this structure, the RF leakage is suppressed without other shield housing. For the fabricated filter, insertion loss value in the passband region was 0.9dB(Max.) and return loss value was 19dB(Min). Also, this filter has a attenuation pole in the stopband.

• 제어로봇시스템학회:학술대회논문집
• /
• 1987.10b
• /
• pp.437-441
• /
• 1987

We have studied a new technical approach for the design of digital FIR filters with flatness in the passband, and equiripple attenuation in the stopband using the program of J.H. McClellan, T.W.Parks, L.R.Rabiner and the flatness property. The design technique directly loads to structures that have low passband sensitivity properties.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.20 no.6
• /
• pp.37-42
• /
• 1983

The TV IF SAW filter if designed using the windowing method. The procedure for fabricating SAW filters is described. The filter is fabricated on the Y-cut, Z-propagation LiNbO3 wafer. The passband ripple and the smaller upper sidelobe attenuation are obseryed. Further improvements and the mass production can be expected.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.43 no.4
• /
• pp.672-678
• /
• 1994

A design of 5th-order Elliptic OTA-C filter for operation at 4.2MHz is presented. the filter structure is composed entirely of five OTAs(Operational transoonductance Amplifiers), one buffer and seven capacitors. To prevent decreasing of frequency charaoteristios due to the parasitic effeots of OTA and buffer, the design considering of parasitic capacitance and finite resistane of OTA and fuffer is pertormed. As the result of the simulation using SPICE with $2{\mu}m$ CMOS parameters, The performances were found to be essentially within the specifications` less than 0.25dB passband attenuation, 30dB stopband attenuation and 4.2MHz cut-off frequency were satisfactorily obtained. The number of elements is also considerably reduced than other design methods.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2006.10a
• /
• pp.79-84
• /
• 2006

A novel design of compact low-pass filter based on microstrip structure and its equivalent-circuit model are developed. The philosophy of the structure behind this novel microstrip low-pass filter is simple as it is composed of a pair of symmetrical parallel coupled-line and an open-stub. With this configuration, a finite attenuation pole near the stopband cutoff frequency is available and adjustable by simply tuning the circuit parameters. Furthermore, the rejection bandwidth of this type of low-pass filter can be extended. In order to validate the feasibility of the proposed design method, a low-pass filter based on a microstrip structure is designed, fabricated, and measured. Experimental results agree very well with the simulation and analytical results.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.39 no.5
• /
• pp.556-563
• /
• 2002

In this paper, a novel method for designing an M-channel, causal, stable IIR cosine-modulated filter bank (CMFB) with near PR property is proposed. The IIR prototype filter is designed with a simple constraint using lattice stucture with 1st order allpass filter components. The IIR prototype filter which is designed by the proposed method has higher stopband attenuation and sharper roll-off characteristic than the one which is designed by the previously proposed method with similar complexity. The proposed M-channel IIR CMFB which is designed from this IIR prototype filter is applied to subband acoustic echo canceller (AEC). We obtained about 15dB higher ERLE using this subband AEC than when M-channel FIR subband AEC with similar complexity.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.44 no.3
• /
• pp.105-112
• /
• 2007

In general, the earlier methods for the design of MAXFLAT FIR filters have existent problems due to the approximation algorithms used to approach MAXFLAT(maximally flat) response in the passband and the stopband.. The proposed approach advanced by using of MAXSHCUT(maximally sharp cutoff) condition in this paper clearly overcomes these problems. In this approach, we use a key parameter represented with filter-order and cutoff-frequency parameters for obtaining the lowpass filters with the MAXFLAT and MAXSHCUT characteristics in the frequency domain. Consequently, this design technique leads to new MAXFLAT and MAXSHCUT FIR digital filter, which can achieve sharp-cutoff responses with the stopband attenuation exceeding 100 dB almost everywhere.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.20 no.5
• /
• pp.37-42
• /
• 1983

The elliptic functions have transmission zeros on the imaginary axis and exhibit equal ripples in the stopband as well as in the passband. As a consequence they can be made optimal in the sense that the transition band is minimal. However the time domain behaviors turned out to be inferior to those of Chebyshev and Butterworth responses. This paper investigates the unit step responses and impulse responses in order to analyze the effects of various parameters such as passband attenuation, stopband frequencies M. etc., The following are the prominent features. Step responses of elliptic filters rise faster and produce larger overshoots and undershoots with higher natural frequencies. In the case of even functions, the initial values are non-zero which decreases as $\omega$s increases. Unlike Butter-worth or Chebyshev cases the impulse responses start with nonzero valses which also decrease as $\omega$s or order of the function increases. Eight figures are included to illustrate above analysis.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.12 no.2
• /
• pp.83-91
• /
• 1987

In this paper, the extended inverse Chebyshev function have been derived from Chebyshev function. We presented normalized biquads coefficients of n=5, 6 for passband attenuation Ap(dB)=0.1, 0.2, 0.5, 1.0, 2.0, 3.0 and stopband frequency Ws(rad/s)=1.2, 1.3, 1.4, 1.5, 1.6. A designed low-pass filter from extended inverse Chebyshev transfer function produces the magnitude haracteristic which is maximally flat in the passband and equalripple in the stopband as shown in fig. 3(c), (d). Finally, it showed the magnitude and loss characteristics through realistic circuit simulation, and presented element values.