• Journal of the Korean Applied Science and Technology
• /
• v.32 no.3
• /
• pp.412-417
• /
• 2015

The purpose of this study is to treat the ballast water by shear stress without an environmental pollution and to find out the optimal treatment conditions. The ballast water problem is issued up as the trade activated and the cargos mobilized. To improve this problem, International Marine Organization(IMO) make the rule about the ballast water treatment with specific restrictions. Although many countries have been studying about the ballast water treatment technology, there is almost no technology that can treat the microorganisms under $50{\mu}m$ without any secondary pollution. In this study, we tried to treat ballast water by applying shear stress as the physical treatment for the sterilization and tried to find out the optimal conditions including the 100% sterilizing rate and the best economic condition.

• Korean Journal of Food Science and Technology
• /
• v.27 no.1
• /
• pp.30-35
• /
• 1995

Gamma irradiation was applied to non-glutinous and glutinous corns for improving starch isolation process. No significant changes in proximate composition of corn grains were observed by gamma irradiation. Irradiation at 1 and 5 kGy was effective for sterilizing all contaminated microorganisms of non-glutinous and glutinous corns, respectively. The moisture-uptake rate constants were increased in proportional to the steeping temperature and applied irradiation dose level. The irradiation efficacy on water absorption properties was also recognized in the corns stored for six months at room temperature. The combined use of gamma irradiation with sulfur dioxide solution was very effective for reducing steeping time. The starch yield gradually increased as irradiation dose levels increased. At 2 kGy, the sarch yield of non-glutinous and glutinous corns increased by 38% and 27%, respectively. No significant difference in Hunter's color value was observed between the starches isolated from nonirradiated and irradiated corn grains.

• Journal of the Semiconductor & Display Technology
• /
• v.23 no.1
• /
• pp.84-87
• /
• 2024

A water sterilization system is developed utilizing a 275 nm-wavelength LED light source equipped with a TIR lens. The system's light source is constructed by combining a 275 nm-wavelength UVC LED, known for its germicidal properties, with a TIR lens having a direction angle of 6.8 degrees. The optical simulation software 'LightTools' is employed to design and optimize the intensity of deep ultraviolet sterilizing light irradiation, its distribution, and sterilization capacity. In the inactivation experiment with E. coli, the water sterilizer system achieved a sterilization rate of 78.92 % while maintaining a water flow capacity of 50 L/min. Compared to the conventional mercury lamp light source water sterilizer system, the UVC LED water sterilizer system addresses environmental concerns related to mercury usage and offers advantages in terms of lifespan and durability.

• Journal of Korea Society of Industrial Information Systems
• /
• v.23 no.3
• /
• pp.25-34
• /
• 2018

This paper presents a heating source of carbon nanofibers for the efficiency and the drying performance of laundry dryer, and focuses on the applicability-evaluation of its source. To design the proposed heating module, experiments were conducted in terms of surface temperature and surface temperature distribution characteristics of carbon nanofiber lamps. The surface temperature of the lamps increased linearly with increment of a current to flow a lamp and revealing the increasing pattern as the length of the ramps is shorter. The proposed heating source was evaluated based on drying efficiency, moisture evaporation rate at laundry, and internal temperature of a drum during drying process. The drying efficiency satisfied a 45% which is specified in KS C 9319. The moisture evaporation rate and the internal temperature of the drum were respectively 98.88% and $61.1^{\circ}C$, which are similar to that of S's company dryer. From the evaluation and actual drying test results, the proposed carbon nanofiber lamp heating module is considered to be applicable as a heat source for laundry dryer in terms of drying efficiency and drying performance. it is possible to obtain a heat source at a high temperature, an excellent calorific value, an improvement in drying performance, and an effect of sterilizing laundry due to the emission of far-infrared rays. In addition to the applicability, the difference of the drying efficiency between the dryers was analyzed in detail based on the power consumption of the heat sources.

• Journal of Biosystems Engineering
• /
• v.36 no.5
• /
• pp.342-347
• /
• 2011

The effect of SNC(silver nano colloid) on the emission reduction of odors such as ammonia ($NH_3$), hydrogen sulfide ($H_2S$), and methane ($CH_4$) from swine excreta was studied. Silver has been used as an universal antibiotic substance and can reduce the emission of some gases by sterilizing action. Therefore, an apparatus which produces SNC was developed and was conducted its performance test. Also, the SNC made by the apparatus was applied to swine excreta sampled from a piggery in oder to find the effect on the reduction of odor emission. An electrolysis apparatus was developed to produce SNC and its capacity was 0.024 ppm/$hr{\cdot}L$. The effects of SNC on the reduction of odor emission from swine excreta were tested for bad smell gases of ammonia ($NH_3$), hydrogen sulfide ($H_2S$) and methane ($CH_4$). For ammonia gas, factorial experiments were conducted to find the effects of concentration and application rate of SNC. The test results for the different concentrations of 20 ppm, 50 ppm, and 100 ppm showed that the more concentration of SNC was increased, the more emission reduction of ammonia gas increased. From the test results about the effect of application rate, the more SNC was applied, the more emission reduction of $NH_3$ increased. In order to reduce the concentration of $NH_3$ below 5 ppm, SNC of 50 ppm is recommended to be applied at an interval of 6 hours, and is mixed with swine excreta in the volumetric ratio of 4:1. For hydrogen sulfide gas, the concentration was decreased as time went by and was reduced rapidly in the first stage of the tests for all applied concentrations of SNC (20 ppm, 50 ppm, and 100 ppm). Especially, when 100 ml of SNC with 100 ppm was applied, emission of hydrogen sulfide gas was reduced rapidly during early 4 hours after the application of SNC. And, concentration of hydrogen sulfide gas was maintained below 20 ppm after 12 hours. For methane gas, t-test showed that there was no significance on the effect of its application for all applied concentrations of SNC. Therefore, it was concluded that the application of SNC on swine excreta had no effect on the emission reduction of $CH_4$.

• Korean Journal of Microbiology
• /
• v.53 no.1
• /
• pp.20-28
• /
• 2017

Physical sterilization methods using ultraviolet radiation and ionizing radiation such as gamma ray and electron beam are applied in various industry fields due to disinfection effects and economic efficiency but may also cause microbial mutation. In this research, Salmonella enterica and Escherichia coli strains were treated with ionizing and ultraviolet radiation and their survival rate, mutation rate, and DNA damage were studied to evaluate the genetic safety. The survival rate of the strains decreased drastically as the irradiation dose of ultraviolet ray, gamma ray, and electron beam increased, and over 90% of the strain was exterminated at a dosage of $0.40{\sim}25.06mJ/cm^3$, 0.11~0.22 kGy, 0.14~0.53 kGy respectively. In SOS / umu-test, genotoxicity causing DNA damage was identified in all samples. In Ames test, back-mutation rate increased to $3.82{\times}10^{-4}$ and $9.84{\times}10^{-6}$ respectively when exposed to ultraviolet ray and gamma ray. At exposure to ultraviolet ray, gamma ray, and electron beam with dosage of over 99.99% extinction rate of S. enterica TA100, back-mutation rate increased 347 times, 220 times, 0.6 times respectively to the spontaneous back-mutation rate. Rifampicin resistance mutation rate of E. coli CSH100 exposed to ultraviolet ray, gamma ray, and electron beam was $2.46{\times}10^{-6}$, $1.66{\times}10^{-6}$, $4.12{\times}10^{-7}$ respectively. Therefore, gamma radiation is effective in microorganism control from the perspective of disinfection and electron beam has the advantage of sterilizing with little DNA damage and bacterial mutation.

• Korean Journal of Soil Science and Fertilizer
• /
• v.14 no.4
• /
• pp.201-209
• /
• 1982

In 1980, the abnormal low temperature was lasted during the late stage of rice growing season, thus low temperature injury occurred severely. The severity of the injury and nutrition absorption were investigated. The result obtained were summarized as follows: 1. It was considered that the severe low temperature injury of rice was caused by the low temperature and shorts of sunshine in the late growing season of rice, especially, the minimum air temperature which was lasted for a few days below critical reproductive growing temperature in the meiosis stage affected high the injury. 2. The low tmperature injury was lightened in the no nitrogen applied plot, and becoming severe with high nitrogen levels, but the balanced application of NPK lessened the low temperature injury. 3. The low temperature injury was more severe in Indica and Japonica hybrid than in Japonica cultivar, and the injury was shown as sterilizing, degraded spiklets, ill emerging of head and inhibition of nutrition absorption, etc. 4. Under the low temperature condition, $SiO_2$ content of rice plant was significantly reduced according to the increase of nitrogen levels. 5. Under the low temperature condition, the optimum application amount of nitrogen for Milyang 23, was 13, 6 kg/10a, this was approximately 10kg/10a smaller than average in usual year. The highly reduced rice yield was resulted from the cool injury, and the reducing rate of yield was larger in Indica and Japonica hybrid cultivar than in Japonica cultivar.

• Journal of Plant Biotechnology
• /
• v.48 no.1
• /
• pp.62-70
• /
• 2021

We analyzed the growth and quality characteristics of barley sprouts grown under artificial light sources consisting of a fluorescent lamp or light-emitting diode (LED) in an aquaculture system (grown with water only, without nutrients). At the end of the observation period, the shoots grown under the fluorescent lamp treatment were the longest, followed by the LED treatment and natural light-treatment. It was also observed that growth was faster for sprouts subjected to a non-sterilizing treatment than those subjected to a 70% ethanol treatment. As the seed sowing rate for planting trays increased, the yield of harvested barley sprouts increased; among light treatments, the natural light treatment resulted in the lowest yield, while the fluorescent light treatment resulted in the highest. The total phenol and total flavonoid contents of extracts of the barley sprouts were highest for the natural light treatment, but TEAC and FRAP were both highest for the fluorescent lamp treatment. The essential amino acid content ranged from 41.64 to 45.93 mg/g and was relatively higher for the natural light treatment than the other two treatments, while the content of non-essential amino acids was highest for the LED treatment. The total amino acid content was highest for the LED treatment at 97.47 ± 6.30 mg/g, for which the content of non-essential amino acids (53.17%) was higher than that of essential amino acids (46.83%).

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.31 no.2
• /
• pp.138-146
• /
• 2021

Objectives: This study aims to compare and evaluate the reduction efficiency of disinfectants used in the domestic meat processing industry to reduce bioaerosol exposure of meat industry workers and to use this as basic data for establishing work environment management measures. Methods: Thirteen disinfectants sold in South Korea were selected for evaluation and the bacterial reduction effect of the disinfectants was investigated. Bacterial suspension and surface disinfection tests were conducted to compare and analyze the antibacterial strength of the disinfectants. Pork carcasses, cutting boards, benches, and conveyor belts were selected for surface sterilization tests. Results: As a result of the bacterial suspension experiment test, all disinfectants had a bacterial reduction efficiency of more than 86%. Among them, the bacterial reduction efficiency of chlorine disinfectants was 99.93% on average. In the results of the pork carcass surface sterilization test, the rate of reduction of disinfectants made of quaternary ammonium compounds (QACs) was the highest. Tests of plastic cutting boards showed that chlorine disinfectants had the best sterilization effect. Experiments on stainless steel benches showed the best bacterial reduction efficiency for chlorine dioxide and QACs disinfectants. In the conveyor belt made of urethane, QACs disinfectants showed excellent sterilization effects. Conclusions: The study evaluated the disinfection power of disinfectants against bacteria occurring in domestic meat processing plants. All disinfectants were found to be effective in bacterial suspension experiments, and chlorine disinfectants were particularly effective. In surface sterilization experiments, sterilizing agents with QACs as the main ingredient were excellent.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.33 no.3
• /
• pp.178-188
• /
• 2017

Purpose: We compared the effects of newly developed diode laser (Bison 808 nm Diode laser) on the treatment of peri-implantitis with conventional products (Picasso 810 nm Diode laser) by comparing the surface temperature of titanium disc and bacterial sterilization according to laser power. Materials and Methods: The titanium disc was irradiated for 60 seconds and 1 - 2.5 W using diode laser 808 nm and 810 nm. The surface temperature of the titanium disc was measured using a temperature measurement module and a temperature measurement program. In addition, in order to investigate the sterilizing effect according to the laser power, 808 nm laser was irradiated after application of bacteria to sandblasted large-grit acid-etched (SLA) and resorbable blast media (RBM) coated titanium discs. The irradiated disks were examined with scanning electron microscopy. Results: Both 808 nm and 810 nm lasers increased disk surface temperature as the power increased. When the 810 nm was irradiated under all conditions, the initial temperature rise rate, the descending rate, and the temperature change before and after was higher than that of 808 nm. Disk surface changes were not observed on both lasers at all conditions. Bacteria were irradiated with 808 nm, and the bactericidal effect was increased as the power increased. Conclusion: When applying these diode lasers to the treatment of peri-implantitis, 808 nm which have a bactericidal effect with less temperature fluctuation in the same power conditions would be considered safer. However, in order to apply a laser treatment in the dental clinical field, various safety and reliability should be secured.