• Proceedings of the KIEE Conference
• /
• 2002.11a
• /
• pp.263-265
• /
• 2002

We have used the secondary-step immobilization methods based on the chip pattern of hydrophobic self-assembly layers to assemble microfabricated particles onto the chip pattern. Immobilization of DNA, fabrication of the particles and the chip pattern, arrangement of the particles on the chip pattern, and recognition of each using DNA fluorescence measurement were carried out. Establishing the walls, the arrangement stability of the particles was improved. Each DNA is able to distinguish by using the lithography process on the particles. Advantages of this method are process simplicity, wide applicability and stability. It is thought that this method can be applicable as a new fabrication technology to develop a minute integration type biosensor microarray.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.8A
• /
• pp.639-647
• /
• 2012

Vision-based on-road vehicle detection is one of the key techniques in automotive driver assistance systems. However, due to the huge within-class variability in vehicle appearance and environmental changes, it remains a challenging task to develop an accurate and reliable detection system. In general, a vehicle detection system consists of two steps. The candidate locations of vehicles are found in the Hypothesis Generation (HG) step, and the detected locations in the HG step are verified in the Hypothesis Verification (HV) step. Since the final decision is made in the HV step, the HV step is crucial for accurate detection. In this paper, we propose using a reduced multivariate polynomial pattern classifier (RM) for the HV step. Our experimental results show that the RM classifier outperforms the well-known Support Vector Machine (SVM) classifier, particularly in terms of the fast decision speed, which is suitable for real-time implementation.

• Journal of KIISE:Computer Systems and Theory
• /
• v.32 no.4
• /
• pp.148-159
• /
• 2005

We propose a technique for finding the worst case response time (WCRT) of a DMA request that is needed in the schedulability analysis of a whole real-time system. The technique consists of three steps. In the first step, we find the worst case bus usage pattern of each CPU task. Then in the second step, we combine the worst case bus usage pattern of CPU tasks to construct the worst case bus usage pattern of the CPU. This second step considers not only the bus requests made by CPU tasks individually but also those due to preemptions among the CPU tasks. finally, in the third step, we use the worst case bus usage pattern of the CPU to derive the WCRT of DMA requests assuming the fixed-priority bus arbitration protocol. Experimental results show that overestimation of the DMA response time by the proposed technique is within $20\%$ for most DMA request sizes and that the percentage overestimation decreases as the DMA request size increases.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.30 no.12
• /
• pp.800-805
• /
• 2017

Randomly patterned and wet chemical etching processes were used to treat anti-glare of display cover glasses. The surface and optical properties of grain size and surface morphology controlled by randomly patterned etching and wet chemical solution etching were investigated. The surface morphology and roughness of the etched samples were examined using a spectrophotometer and a portable surface roughness (Ra) measuring instrument, respectively. The gloss caused by reflection from the glass surface was measured at $60^{\circ}$ using a gloss meter. The surface of the sample etched by the doctor-blade process was more uniform than that obtained from a screen pattern etching process at gel state etching process of the first step. The surface roughness obtained from the randomly patterned etching process depended greatly on the mesh size, which in turn affected the grain size and pattern formation. The surface morphology and gloss obtained by the etching process in the second step depended primarily on the mesh size of the gel state etching process of the first step. In our experimental range, the gloss increased on decreasing the grain size at a lower mesh size for the first step process and for longer reaction times for the second step process.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.231-231
• /
• 2010

현재 Cu배선 제조공정에서 전해도금은 Damascene pattern의 Cu filling에 사용되고 있는데, 우수한 특성의 전해도금을 위해서는 step coverage가 우수한 Cu seed layer가 필수적이다. 현재까지 Cu seed layer를 형성하는 방법으로는 ionized physical vapor deposition(I-PVD)이 사용되고 있는데, 22 nm 이후의 소자에서는 step coverage의 한계로 인해 완벽한 Cu filling 어려울 것으로 예상된다. 본 연구에서는 step coverage가 매우 우수한 atomic layer deposition(ALD) 방법으로 Cu seed layer를 증착하고 그 특성을 기존의 PVD 박막과 비교하였다. Ketoiminate 계열의 +2가 Cu 전구체와 $H_2$를 이용하여 ALD Cu 박막을 증착하였는데 exposure, 기판의 온도를 변화시키면서 기판별로 ALD Cu의 최적공정조건을 도출하였다. ALD Cu seed와 PVD Cu seed 위에 약 $1{\mu}m$의 Cu 박막을 전해도금한 후 박막의 두께, 비저항, 미세구조와 함께 pattern filling 특성을 비교하였다.

• Journal of Fashion Business
• /
• v.4 no.4
• /
• pp.41-54
• /
• 2000

The purpose of this study was to investigate various expressions in textile design using CAD and present print design of '01/02 A/W. Four steps were taken in order to achieve this purpose. The first step was to investigate prior research and to analyze textile design methods using CAD. The second step was to study '01/02 A/W fashion trend, especially textile trend. The third step was to design the print design according to textile trend and apply the designed print pattern to real model. The research results are as follows: 1. Textile design is a very important field to help making fashion industry more informative and valuable. 2. Using CAD system in textile design will be very useful and urgent in saving working time and exercising design works. 3. In '01/02 A/W hound's tooth, zigzag, herringbone will be prevalent bold geometric patterns while tartan checks, multi color stripes will be popular too. 4. Textile designs using flower, stripe, checks, dot, abstract pattern were applied to real model, the images of patterns design are as follow, flower pattern-romantic stripe-avantgarde check-cute dotclassic abstract motive-intelligent.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.9 no.6
• /
• pp.558-562
• /
• 1999

For 6H-SiC crystals which was obtained by sublimation growth, the formation of micropipes and internal planar defects was discussed in consideration of the inter-relationship between mass adsorption behavior and the defects origin on the growth interface on the basis of KSV theory and the the step growth pattern on the vicinal plane. Micropipes and planar defects was formed in the region which the step could not be grown by impurities impinging. It was realized that the internal defects formation was related to the crystallographic step planes formed on the growth interface and the migration of the molecules adsorbed on it.

• Korean Journal of Applied Biomechanics
• /
• v.15 no.2
• /
• pp.93-102
• /
• 2005

The purpose of this study was to examine the effect of step length on the joint moment. The subjects were 4 undergraduate and graduate students in their 20s with normal legs. The subjects were individually tested by the running timer at the walking speed of 0.67m/s, 134m/s, and 2.46m/s. The step length was regulated to -10% of normal, normal and +10% of normal step length using foot print. The walking performances of each subjects were filmed using a high speed video camera. The raw data were analyzed by LabVIEW Graphical Program and these data were analyzed by ANOVAs and Scheffe. The results of this study were as follows: The maximum dorsiflexion moment of the ankle joint increased as the step length increased only at the fast walking speed. Although there wasn't significant difference shown in the plantar flexion moment, regular pattern in the plantar flexion moment which increased as the step length increased was found. The first maximum extension moment of the knee joint increased only at the normal walking speed, but there appeared no significant difference in the maximum flexion and second extension moment. The maximum extension moment of the hip joint increased at the normal and fast walking speed. Although there wasn't significant difference, regular pattern in flexion moment which increased as the step length increased was found.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.60-60
• /
• 2021

Investigating Backward-Facing Step(BFS) flow is important in that it is a representative case for separation flows in various engineering flow systems. There have been a wide range of experimental, theoretical, and numerical studies to investigate the flow characteristics over BFS, such as flow separation, reattachment length and recirculation zone. However, most of such previous studies were concentrated only on the perpendicular step angle. In this study, several numerical investigations on the flow pattern over BFS with various step angles (10° ~ 90°) and expansion ratios (1.48, 2 and 3.27) under different Reynolds numbers (5000 ~ 64000) were carried out, mainly focused on the reattachment length. The numerical simulations were performed using an open source 3D CFD software, OpenFOAM, in which the velocity profiles and turbulence intensities are calculated by RANS (Reynolds Averaged Navier-Stokes equation) and 3D LES (Large Eddy Simulation) turbulence models. Overall, it shows a good agreement between simulations and the experimental data by Ruck and Makiola (1993). In comparison with the results obtained from RANS and 3D LES, it was shown that 3D LES model can capture much better and more details on the velocity profiles, turbulence intensities, and reattachment length behind the step for relatively low Reynolds number(Re < 11000) cases. However, the simulation results by both of RANS and 3D LES showed very good agreement with the experimental data for the high Reynolds number cases(Re > 11000). For Re > 11000, the reattachment length is no longer dependent on the Reynolds number, and it tends to be nearly constant for the step angles larger than 30°.) Based on the calibrated and validated numerical simulations, several additional numerical simulations were also conducted with higher Reynolds number and another expansion ratio which were not considered in the experiments by Ruck and Makiola (1993).

• Proceedings of the KSRS Conference
• /
• 2005.10a
• /
• pp.454-457
• /
• 2005

Mining frequent patterns in transaction databases, time-series databases, and many other kinds of databases has been studied popularly in data mining research. Most of the previous studies adopt an Apriori-like candidate set generation-and-test approach. However, candidate set generation is still costly, especially when there exist prolific patterns and/or long patterns. And calendar based on temporal association rules proposes the discovery of association rules along with their temporal patterns in terms of calendar schemas, but this approach is also adopt an Apriori-like candidate set generation. In this paper, we propose an efficient temporal frequent pattern mining using TFP-tree (Temporal Frequent Pattern tree). This approach has three advantages: (1) this method separates many partitions by according to maximum size domain and only scans the transaction once for reducing the I/O cost. (2) This method maintains all of transactions using FP-trees. (3) We only have the FP-trees of I-star pattern and other star pattern nodes only link them step by step for efficient mining and the saving memory. Our performance study shows that the TFP-tree is efficient and scalable for mining, and is about an order of magnitude faster than the Apriori algorithm and also faster than calendar based on temporal frequent pattern mining methods.