• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.36 no.10
• /
• pp.703-712
• /
• 1987

A position detection method for 2 phase bifilar permanent magnet step motors is proposed. The back emfgenerated on 2 phase windings by rotor permanent magnet is calculated using motor terminal voltage and current by analog circuit, and the rotor position output is obtained from tese back emf signals through some logical manipulation circuit. This position detector functionally acts like a 2 channel optical incremental encoder, and it is also shown by experimental results that it works well over wide range of speed or under resonant condition where the rotor rings around the detent position. Its resolution is twice of the number of steps per revolution. Bu software implemented on micro-processor, the reliability of position output is enhanced, detecting and correcting error dut to external and/ or internal noise.

• The Journal of the Korean dental association
• /
• v.54 no.6
• /
• pp.468-474
• /
• 2016

Korean government enacted the 1st Basic Plan for Low Fertility and Population Ageing in 2005 due to the long-lasting ultra-low birth rate. Based on the Act, Korean government set up a step-by-step strategic goal and establish a basic plan, every five years, to achieve the sustainable development of society corresponding to low fertility and aging society. Over the past decade, the 1st Basic Plan for Low Fertility and Population Ageing (2006-2010) and the 2nd Basic Plan for Low Fertility and Population Ageing (2011-2015) was executed. This year, based on the achievements and limitations of the 1st and 2nd Basic Plan, the 3rd Basic Plan for Low Fertility and Population Ageing begins. In this manuscript, I discuss the background of the 3rd Basic Plan and its significance in oral health area.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.19 no.8
• /
• pp.2039-2050
• /
• 1995

The nonlinear low-Reynolds-number k..epsilon. model of park and Sung is extended to predict the turbulent heat transports in separated and reattaching flows. The equations of the temperature variance( $k_{\theta}$ and its dissipation rate(.epsilon.$_{\theta}$ are solved, in concert with the equations of the turbulent kinetic energy(k) and its dissiation rate(.epsilon). In the present model, the near-wall effect and the non-equilibrium effect are fully taken into consideration. The validation of the model is then applied to the turbulent flow behind a backward-facing step and the flow over a blunt body. The predicted results of the present model are compared and evaluated with the relevant experiments.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.21 no.1
• /
• pp.71-78
• /
• 1984

In this paper a new method of improving the performance of ADPCM in noisy channel is proposed. The proposed method employs a robust quantizer, and transmits the information regarding the maximum step size periodically. Also, a scheme to correct most significant bit (MSB) errors is used in the receiver buffer. According to our computer simulation with real speech, the proposed ADPCM with error control yields an improvement of about 4 to 5 dB in noisy channel over the conventional ADPCM without error control.

• Proceedings of the KIEE Conference
• /
• 2006.04a
• /
• pp.105-107
• /
• 2006

As internet streaming data increase, transport protocol such as TCP, TGP-Friendly is important to study control transmission rate and share of Internet bandwidth. In this paper, we propose a TCP-Friendly protocol using Neural Network for media delivery over wired Internet which has various traffic size(PTFRC). PTFRC can effectively send streaming data when occur congestion and predict one-step ahead round trip time and packet loss rate. A multi-layer perceptron structure is used as the prediction model, and the Levenberg-Marquardt algorithm is used as a traning algorithm. The performance of the PTFRC was evaluated by the share of Bandwidth and packet loss rate with various protocols.

• Proceedings of the KSME Conference
• /
• 2000.04a
• /
• pp.826-830
• /
• 2000

Sculptured surface machining plays a vital role in the process of bring new Products to the market place. A great variety of products rely on this technology for the production of the dies and moulds used in manufacturing. And, the use or CNC machines and CAD/CAM system has become a vital parts or product development process. But, cusp is inevitable by-product in sculptured surface machining, and it is very difficult to calculate the cusp height correctly. In this study, an analytical cusp height model is proposed considering the radius of the ball end mill, radius of machined workpiece and the inclined angle of convex or concave circular surface. Experiments were performed to check the validity of this proposed model and experimental results showed that the proposed cusp model were very effective.

• 한국연소학회:학술대회논문집
• /
• 2006.04a
• /
• pp.55-62
• /
• 2006

A two-step fuel-rich/fuel-lean catalytic combustion seems to be one of the most effective methods to control simultaneously the NO generation and the hydrocarbon (HC) conversion from fuel-bound nitrogen. By controlling equivalent air ratio for maintaining fuel-rich and fuel-lean condition over each catalytic layer, space velocity, inlet temperature, and catalyst component, the HCand ammonia conversion efficiency higher than 95% could be achieved, with ammonia conversion to NO remaining below 5%. The experimental results wouldbe applied to the combustion of land fill gas and to gasified refuse-derived fuels as a method of minimizing NO generation.

• Communications for Statistical Applications and Methods
• /
• v.10 no.1
• /
• pp.225-232
• /
• 2003

The support vector machine (SVM) is becoming increasingly popular in classification. The import vector machine (IVM) has been introduced for its advantages over SMV. This paper tries to improve the IVM. The proposed method, which is referred to as the polychotomous machine (PM), uses the Newton-Raphson method to find estimates of coefficients, and the Rao and Wald tests, respectively, for addition and deletion of import points. Because the PM basically follows the same addition step and adopts the deletion step, it uses, typically, less import vectors than the IVM without loosing accuracy. Simulated and real data sets are used to illustrate the performance of the proposed method.

• Korean System Dynamics Review
• /
• v.1 no.1
• /
• pp.57-79
• /
• 2000

Most model constructs in organization studies are descriptive in nature, and the conclusions relating to the model behavior over time are speculative. The usefulness of System Dynamics as a methodology for modeling and testing dynamic behavioral hypotheses in organizational behavioral studies is presented, and how to construct a System Dynamics model using simulation software(VENSIM) is shown, The well-know March and Simon motivation model is used to demonstrate the step by step application of System Dynamics to model of this type. The dynamic behavior of the model, both transient and steady state, is obtained, Even though the paper has focused on one model in the area of individual behavior, the approach is general and can be applied to other areas of organizational behavior as will. The usefulness of System Dynamics as a methodology for theory building is identified as well.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.11A
• /
• pp.1021-1026
• /
• 2005

In this paper, we present a novel predictive CDMA closed-loop power control (CLPC) method with a multi-step least squares (LS) linear predictor for time-varying fading channels. The proposed method effectively compensates multiple power control group delays and provides significant performance gains over nonpredictive CLPCs as well as conventional predictive CLPCs with one-step linear predictor.