• 제목/요약/키워드: Step function

검색결과 1,782건 처리시간 0.027초

크리프 회복식을 이용한 철근콘크리트 및 프리스트레이트 콘크리트 부재의 크리프 해석에 고나한연구 (A Study on the Creep Analysis of Reinforced and Prestressed Concrete Structures Using Creep Recovery Function)

  • 오병환;김세훈;양인환
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 1998년도 봄 학술발표회 논문집(I)
    • /
    • pp.339-345
    • /
    • 1998
  • The creep of concrete structures caused by variable stresses is mostly calculated by step-by-step method based on the superposition of creep function. Although most practical application is carried out by this linear assumption, significant deviations between predictions and experiments have been observed when unloading takes place, that is, stress is reduced. The recovery is overestimated. The main purpose of this study is to present the application method of the creep analysis model which is expressed with both creep function and creep recovery function to concrete structures where is expressed with both creep function and creep recovery function to concrete structures where increase or decrease of stress is repeated . To apply two function method to time analysis of concrete structures, this study presents the calculation method of creep strain increment for stress variation. Then, this paper executes the time analysis for an example using suggested method, and compares theses results with the previous analysis values and experimental results.

  • PDF

역정규 손실함수를 이용한 기대손실 관리도의 개발 (A Development of Expected Loss Control Chart Using Reflected Normal Loss Function)

  • 김동혁;정영배
    • 산업경영시스템학회지
    • /
    • 제39권2호
    • /
    • pp.37-45
    • /
    • 2016
  • Control chart is representative tools of statistical process control (SPC). It is a graph that plotting the characteristic values from the process. It has two steps (or Phase). First step is a procedure for finding a process parameters. It is called Phase I. This step is to find the process parameters by using data obtained from in-controlled process. It is a step that the standard value was not determined. Another step is monitoring process by already known process parameters from Phase I. It is called Phase II. These control chart is the process quality characteristic value for management, which is plotted dot whether the existence within the control limit or not. But, this is not given information about the economic loss that occurs when a product characteristic value does not match the target value. In order to meet the customer needs, company not only consider stability of the process variation but also produce the product that is meet the target value. Taguchi's quadratic loss function is include information about economic loss that occurred by the mismatch the target value. However, Taguchi's quadratic loss function is very simple quadratic curve. It is difficult to realistically reflect the increased amount of loss that due to a deviation from the target value. Also, it can be well explained by only on condition that the normal process. Spiring proposed an alternative loss function that called reflected normal loss function (RNLF). In this paper, we design a new control chart for overcome these disadvantage by using the Spiring's RNLF. And we demonstrate effectiveness of new control chart by comparing its average run length (ARL) with ${\bar{x}}-R$ control chart and expected loss control chart (ELCC).

New Target Transfer Functions with No Overshoot

  • Yang, Dae--Jeong;Kim, Young-Chol
    • Journal of KIEE
    • /
    • 제11권1호
    • /
    • pp.14-20
    • /
    • 2001
  • To design a controller based on the pole placement method, it is necessary to obtain either a target transfer function or a desired characteristic equation which results in the closed-loop response. Specially, a step response in which no overshoot occurs in highly desirable in many applications. In this paper, we present two new present two new prototypes of Type I target transfer functions whose step responses have an overshoot of less than 0.1%. One prototype is obtained by Taylor's approximation of a Gaussian function. It is, however, observed that the response delays increase with increasing order, while the rise times are nearly constant. The other prototype is a modification of the first prototype, so that their transfer function coefficients have particular values in terms of specific parameters ${\gamma}$i and $\tau$ (see section 2). The second prototype gives very useful properties in which step responses are almost the same shape, irrespective of the order. It, also, has no overshoot. Some other properties of the prototypes and an application example are given.

  • PDF

MATHEMATICAL UNDERSTANDING OF CONSCIOUSNESS AND UNCONCIOUSNESS

  • LEE, NAMI;KIM, EUN YOUNG;SHIN, CHANGSOO
    • Journal of the Korean Society for Industrial and Applied Mathematics
    • /
    • 제21권2호
    • /
    • pp.75-79
    • /
    • 2017
  • This paper approaches the subject of consciousness and unconsciousness from a mathematical point of view. It sets up a hypothesis that when unconscious state becomes conscious state, high density energy is released. We argue that the process of transformation of unconsciousness into consciousness can be expressed using the infinite recursive Heaviside step function. We claim that differentiation of the potential of unconsciousness with respect to time is the process of being conscious in a world where only time exists, since the thinking process never have any concrete space. We try to attribute our unconsciousness to a special solution of the multi-dimensional advection partial differential equation which can be represented by the finite recursive Heaviside step function. Mathematical language explains how the infinitive neural process is perceived and understood by consciousness in a definitive time.

향상된 유전알고리듬과 Simplex method을 이용한 다봉성 함수의 최적화 (Optimization of Multimodal Function Using An Enhanced Genetic Algorithm and Simplex Method)

  • 김영찬;양보석
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2000년도 추계학술대회논문집
    • /
    • pp.587-592
    • /
    • 2000
  • The optimization method based on an enhanced genetic algorithms is proposed for multimodal function optimization in this paper. This method is consisted of two main steps. The first step is global search step using the genetic algorithm(GA) and function assurance criterion(FAC). The belonging of an population to initial solution group is decided according to the FAC. The second step is to decide the similarity between individuals, and to research the optimum solutions by simplex method in reconstructive search space. Two numerical examples are also presented in this paper to comparing with conventional methods.

  • PDF

단계적 측정법에 의한 시간 영역 음향 홀로그래피 (Time Domain Acoustic Holography by Step-by-step Measurement)

  • 윤호성;남경욱;김양한
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2003년도 춘계학술대회논문집
    • /
    • pp.635-639
    • /
    • 2003
  • When we carry out acoustic holography, step-by-step measurement provides us larger aperture size with same number of microphones. But when we carry out step-by-step measurement, it is blown that sound signal must be stationary. However, when transfer function between input and output signal is time-invariant, we can apply step-by-step measurement to acoustic holography even if sound signal is transient We have to do only some Processing on signals from step-by-step measurements to make the signal data of each step compatiable with other steps. This paper accounts for that processing method.

  • PDF

Design of bivariate step-stress partially accelerated degradation test plan using copula and gamma process

  • Srivastava, P.W.;Manisha, Manisha;Agarwal, M.L.
    • International Journal of Reliability and Applications
    • /
    • 제17권1호
    • /
    • pp.21-49
    • /
    • 2016
  • Many mechanical, electrical and electronic products have more than one performance characteristics (PCs). For example the performance degradation of rubidium discharge lamps can be characterized by the rubidium consumption or the decreasing intensity the lamp. The product may degrade due to all the PCs which may be independent or dependent. This paper deals with the design of optimal bivariate step-stress partially accelerated degradation test (PADT) with degradation paths modelled by gamma process. The dependency between PCs has been modelled through Frank copula function. In partial step-stress loading, the unit is tested at usual stress for some time, and then the stress is accelerated. This helps in preventing over-stressing of the test specimens. Failure occurs when the performance characteristic crosses the critical value the first time. Under the constraint of total experimental cost, the optimal test duration and the optimal number of inspections at each intermediate stress level are obtained using variance optimality criterion.

산지하천의 스텝-풀 연속체 복원설계 (Restoration design of step-pool sequence in mountain streams)

  • 김기흥
    • 한국수자원학회논문집
    • /
    • 제53권1호
    • /
    • pp.29-43
    • /
    • 2020
  • 본 연구의 목적은 하천복원에 스텝-풀 연속체를 적용하기 위해 기존 연구결과에서 스텝-풀의 기하구조, 형성 과정, 수리 기능, 복원 및 생태 기능과 관련된 사항을 검토하여 설계기준 및 세부설계 모델을 제시하는 것이다. 분석 및 검토결과를 바탕으로 스텝 간격과 하폭의 비, 단위스텝경사와 하상경사의 비, 및 스텝 높이와 입경 비로서 스텝-풀의 구조 및 규모에 대한 설계기준을 제시하였고, 스텝의 구조적 안정성 확보를 위해서는 키스톤 이론을 근거로 전도에 대한 안정성 해석방법을 설계기준으로 제시하였다. 세부설계 개념으로서 스텝-풀의 평면, 종단 및 횡단 구성에 키스톤과 아치스톤에 대한 겹침구조를 적용한 배치 모델을 제안하였다.

가미청상보하탕 엑기스제의 기관지천식환자의 중증도에 따른 임상효과 (The Clinical Effects of Gamichuongsangboha-tang (Jiaweiqingshangbuxia-tang) extract in Asthmatic Patients Based on Severity)

  • 정승기;정희재;이재성;이건영;정승연;이형구;최준용
    • 대한한의학회지
    • /
    • 제25권2호
    • /
    • pp.110-118
    • /
    • 2004
  • Objectives : Based on the changes of quality of life and pulmonary function test, we aimed to identify the effects and side-effects of Gamichuongsangboha-tang and in asthmatic patients. Methods : The subjects consisted of 30 patients with asthma who were treated with Gamichuongsangboha-tang extract for four weeks. Gamichuongsangboha-tang extract is the extracted powder form of the modified herbal decoction Chuongsangboha-whan, which has been used as the traditional therapeutic agent for asthma. Pulmonary function test (PFT) was checked before and after 4 weeks of treatment. Quality of Life QuestionnaireQ for Adult Korean Asthmatics (QLQAKA) was checked before and after 2 and 4 weeks of treatment. Unpleasant symptoms were checked in all patients at 2 weeks and 4 weeks from the beginning of treatment. Results : Treatment with Gamichuongsangboha-tang extract for four weeks resulted in significant increase in $FEV_{1.0}%$, PEFR%, and QLQAKA. The total efficacy rate of QLQAKA in the patient group was 53.3% after 4 weeks. The QLQAKA of the step 2, step 3, and step 4 groups (n=18, 55.6%) classified by global initiative for asthma (GINA) consistently increased, and significant improvement of QLQAKA occurred in the step3 group. In the step 4 group, FEV1.0%, and PEFR% were significantly increased. A total of 15 patients experienced unpleasant symptoms during the first 2 weeks of treatment, but these symptoms disappeared in all but 2 cases with no need of further treatment during the 2nd 2-week period. Conclusions : This study shows that Gamichuongsangboha-tang extract has effects on improvement of pulmonary function and quality of life, especially in persistent symptomatic asthmatics. Obviously further study concerning all these is still necessary.

  • PDF

토오크 맥동량에 의한 전압원 PAWM 인버터의 평가 (An Evaluation of Voltage Source PAWM Inverter by Torque Ripple Content)

  • 이치환;구본호;권우현
    • 대한전자공학회논문지
    • /
    • 제26권5호
    • /
    • pp.60-70
    • /
    • 1989
  • 본 연구는 인버터로 구동되는 유도전동기에서 발생되는 토오크 맥동을 표현하는, 고조파 토오크 함수 HTF(harmonic torque function)를 제안하고, 컴퓨터 시뮬레이션과 실험을 통하여 HTF의 타당성을 입증하였다. 제안된 HTF는 고조파 전류의 크기 뿐만 아니라 위상까지 고려하므로서 부하변동에 무관한 고조파 토오크 함수가 되었으며, 이를 six-step. SPWM 및 TPWM의 펄스 폭 제어 인버터에 적용하여 비교하였다. 그 결과 PAWM 인버터에서의 우수한 제어방법이 선택되었다. 한 주기당 펄스수가 9이하에서는 six-step이, 출력전압 크기와 토오크 맥동의 측면에서, SPWM 및 TPWM보다 우수함을 알 수 있었다.

  • PDF