• Journal of Ocean Engineering and Technology
• /
• v.37 no.6
• /
• pp.266-272
• /
• 2023

The structure of a ship is completed by processing various steel plates and welding these plates. This butt welding of plates is defined as a seam in shipyards, and this study seeks to find a way to decrease costs by reducing the utilization of steel through effective seam arrangement. Seams were defined and classified according to purpose, and examples of "pieces" and "main plates" where seam creation had an economical saving effect were selected. For "pieces," the change in the weight of steel utilized depending on the presence or absence of a seam was calculated, and the resulting change in cost increase was presented. In the case of the "main plate," the quantity of seams does not change, but an example of cost variation due to the appropriate placement of seams is presented. Hence, a large difference was found in the costs of "pieces" depending on seam location. Thus, it was advantageous to create additional seams. For the "main plate," it was found that narrow-width and wide-width materials incur more costs. This study demonstrates that creating seams is economically advantageous but may not be preferred owing to the increased workload from a production perspective.

• Journal of Korean Society of Steel Construction
• /
• v.20 no.3
• /
• pp.437-444
• /
• 2008

The use of imported structural steel tubes has been increased in domestic construction field because of its low price, but the mechanical properties of those steel tube are not verified exactly. This study includes coupon test and stub - column compression test on the structural steel tube. The compression test of stub - column was performed to characterize and quantify the material characteristic and strength of column compatibility, in which we compared the experiment formula and the abstract formula by the application of the LRFD standard formula and multiple column curve.

• Environmental and Resource Economics Review
• /
• v.29 no.4
• /
• pp.499-520
• /
• 2020

Input ratio of electricity to other production inputs in the Korean manufacturing sector has been higher than for the other OECD countries. In addition, electricity prices in Korea has been relatively lower than the average of OECD countries. Moreover, electricity sector is responsible for most CO2 emissions in Korea as coal and natural gas account 41.9% and 26.8% of electricity production as of 2018. Therefore, it looks inevitable to raise the electricity tariff for the manufacturing sector in Korea, but there is a concern that increase in the electricity tariff might affect small and medium enterprises (SMEs) more than large firms. This study estimates electricity demand's price and output elasticities for large firms and SMEs in steel industry by employing a time varying parameter model (Kalman filter). The analysis shows that changes in output levels regardless of firms' size affect electricity demands more significantly than do changes in electricity prices. Second, large firms have higher variances for both price and output elasticities of electricity demand. Third, large firms have higher price elasticity but lower output elasticity of electricity demand relative to SMEs. Policy implications are suggested in association with how to reduce electricity demands in the energy-intensive industry.

• Journal of Korean Society of Steel Construction
• /
• v.21 no.1
• /
• pp.1-14
• /
• 2009

Estimating appropriate construction cost at the design phase is judged with one important issue to the efficient security and the execution of budget. Therefore, in this paper, to build fundamental data of appropriate construction cost for steel box bridges, the existing calculated document such as the quantity, unit price document and detail items etc.. was analyzed and the basic specification of the bridges was investigated. Also, by estimating the relationship between predetermined cost and construction items on the bridges, the paper is intended to produce basic data for the calculation of appropriate construction cost in planning phase. From the result, it was calculated ratio of construction item in the total construction cost and unit cost. And then it was deduced effect factor of construction cost in steel box bridge.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2015.05a
• /
• pp.40-41
• /
• 2015

The purpose of this study is to develop advaced furture type of concrete which utilizes transpart plastic types of fiber replacing previously used high price optical fiber and porous type of steel mold to induce its mass production. New type of concrete solved problems of construction and economy can make it easily their application to construction market.

• Journal of the Korean Home Economics Association
• /
• v.36 no.11
• /
• pp.119-128
• /
• 1998

This study was designed to find tendencies of housing value orientation of the model steel house visitors. Questionnaires were collected in June, 1997, 1,550 in total, 508 cases from Seoul, 456 cases from Pohang, and 486 cases from Kwangyang. Data were analyzed in terms of housing value orientation, using statistical methods including frequencies, mean, percentages, chi-square test and multiple regression. The major findings are as follows; 1. The subjects were highly educated(64% of them were college graduates) with the monthly income over 2,000,000won(approximately $1,540). The average monthy income of the subjects in Seoul, about 4,000,000won($3,070), was much higher than that of other areas. Most of the subjects were condominium owners(72%), who preferred single detatched houses or town houses located in suburban areas. 2. Differences in general tendencies among the three regional groups were statistically significant. Most significantly, subjects living in Pohang regarded the reputation of the building construction company most importnat. Subjects of all three regional areas, especially in Pohang, emphasized investment value. The price of the steel house was regarded as very important by all the groups tested. The housing value orientation was analyzed in 3 aspects; (1) Facility.Plumbing.Structure(FPS), (2) Interior space formation.Design(ID) and (3) Developmental complex.Near Environment(DN). Interior environment level, stability of house structure, and finighing state of interiors were identified as the important factors in the area of FPS(p<.05). The Interior plan organization was the most important factor among ID. As for DN, rated importantly were educational facilities, green areas, convenience of commercial facilities within the developmental complex were rated importantly.

• Korean Journal of Metals and Materials
• /
• v.50 no.11
• /
• pp.809-815
• /
• 2012

Recently, as the interest in improving energy efficiency has grown, the demand for vehicle and machine parts that are resistant in high temperature corrosive conditions and abrasive environments has increased. Pack chromizing treatment of sintered steels is a profitable method that satisfies both corrosion resistance and low friction properties. Since austenitic stainless steels have good corrosion resistance but low mechanical hardness, if they are replaced by sintered steel parts with pack chromizing treatment, all the desirable properties such as low price, easy molding, high hardness, low frictional coefficient, and high corrosion resistance, can be obtained. The higher corrosion resistance of the chromized parts over that of the austenitic stainless steels was acquired by coating chromium carbides and a thin chromium oxides layer on the surface. Moreover, the surface morphology of chromized parts, which were composed of chromium rich phases and hardened chromium carbides by diffusing and alloying, had a peak-and-valley shape so that the dimple effect by the wrinkled morphology and high hardness induced a low friction coefficient.

• Korea Trade Review
• /
• v.47 no.6
• /
• pp.355-375
• /
• 2022

In this study, LCA based on EU PAS 2050 and Product Category Rules (PCR) was conducted for steel products with the highest proportion of Korea's exports to the EU among the carbon border adjustment items that were passed by the EU Parliament in June and applied to imports from 2025. Carbon emissions were calculated by (ISO 14040) analysis. As a result of the analysis, the total emission is 394,000 tons, and when converted to the EU ETS weekly price, it is 39,000.000 euros, which is about 5% of the export amount of 734 million dollars. This is the same effect as a 5% tariff increase. This study applies international standards in calculating the carbon footprint and provides information that is closest to the expected amount to be imposed in the future EU CBAM, providing the effect of enabling exporters to establish trade strategies and international competitiveness measures in advance.

• Journal of Information Technology Services
• /
• v.10 no.2
• /
• pp.177-188
• /
• 2011

This paper proposes a DEA model for the performance evaluation of each brand of coking coals in an integrated steel mill. The performance is defined as the efficiency which is the ratio of two linear combinations of the output factors to the input factors. There is only one input factor considered in the model : unit price of each brand based on CIF. Five output factors are chosen in consideration of their impact to the quality of cokes such as Ash, VM, LMF, TD, and Rm. Some of the output factors are treated as undesirable in DEA model because the quality criteria are given by the range. The CCR and BCC efficiencies are derived by the DEA model, and the scale efficiency is calculated, too. Each brand of coking coal is classified into four categories according to the CCR and BCC efficiencies, and the most inferior brands are identified as a result. The impact of the input and output factors to the efficiency is analyzed using a multiple regression, then the unit price is revealed as the most critical among them. Also, ANOVA results show that there exist efficiency differences among the coal types and the countries imported, respectively. Finally, the quantitative projection for the inefficient brands is performed if they are to be efficient. The result could be utilized in selecting the good or bad brands of coking coal based on the efficiency in an integrated steel mill. Also, this model will be used to assess the relative efficiency of a new brand of coking coal if it is a candidate to be imported.

• Korean Journal of Acupuncture
• /
• v.18 no.1
• /
• pp.165-170
• /
• 2001

A rapid increasing in cultivation area due to favorable price temporarily and decreasing in consumer's demands caused by economic depressions recently, lead the price of Cynanchum wilfordii Hemsley to decline sharply. Thus, it may give rises to weakening of cultivation bases in Cynanchum wilfordii Hemsley. To investigate optimal mechanical peeling conditions of Cynanchum wilfordii Hemsley, protruded rubber, plastic pad, diamond shape's steel and palstic brush were introduced as blades and artificial stone, sand and small pebble were done as abrasives. The main results obtained were summarized as follows; 1. It took 2 minutes per 1kg in mechanical peeling of Cynanchum wilfordii Hemsley's raw root whereas 36 minutes in manual peeling and values of lightness showed more higher in manual peeling than in mechanical peeling. 2. Yield in combination of diamond shape's steel blade and sand abrasive showed the lowest at 89.9% among treatments and peeling rates in combination of diamond shape's steel blade and small pebble showed the highest at 71.3% in mechanical peeling. 3. Lightness, one of the most important factors in determining quality of Cynanchum wilfordii Hemsley, showed the highest in combination of diamond shape's steel blade and small pebble brasive at 61.90 in mechanical peeling. 4. As the speed of rotation gets faster, yields tend to lower in mechanical peeling. Peeling rates and lightness showed the highest at 66.8%, 57.96 respectively among treatments at 30 r.p.m. in mechanical peeling.