• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2012.05a
• /
• pp.333-336
• /
• 2012

In modern Construction Industry, as accumulation of capital and improvement of technology skills, buildings are becoming higher and more enormous, also the portion of steel works has been increasing. In addition, it is necessary to predict the optimum level of construction cost in a reasonable way. The composition of construction is direct construction cost, indirect construction cost and so on. However, it is not enough to study about indirect construction cost rather than direct construction cost. In this study, the state of productivity and indirect construction cost are analyzed in the steel production. As a result, the productivity and ratio of indirect cost in steel plant by inserted per 1ton are suggested.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2005.05b
• /
• pp.205-208
• /
• 2005

The present study surveys the concrete properties-concerned factors influencing the chloride threshold level for steel corrosion in concrete, altogether with supporting experimental works, in particular, chloride binding capacity, buffering capacity, condition of steel-concrete interface and cement replacement. It concluded that the order of the dominance on CTL is such that chloride binding < buffering capacity of cement matrix < physical condition of steel-concrete interface. This is attributed to the fact that calcium hydroxide does not form a continuous layer on the steel surface and that bound chlorides are released at the stage of corrosion initiation.

• Steel and Composite Structures
• /
• v.17 no.5
• /
• pp.687-704
• /
• 2014

A great number of moment-resisting steel structures collapsed due to ductile crack initiation at welded beam-column connections, followed by explosive brittle fracture in the Kobe (Hyogoken-Nanbu) earthquake in 1995. A series of experimental and numerical studies on cracking behaviors of beam-column connections in steel bridge piers were carried out by the authors' team. This paper aims to study the effect of post weld treatment on cracking behaviors of the connections during a strong earthquake event. Experiments of three specimens with different weld finishes, i.e., as-welded, R-finish, and burr grinding, were conducted. The experimental results indicate that the instants of ductile crack initiation are greatly delayed for the specimens with R-finish and burr grinding finishes compared with the as-welded one. The strain concentration effect in the connection is also greatly reduced in the specimens with post weld treatment compared with the as-welded one, which was also verified in the tests.

• Journal of the Korea Safety Management & Science
• /
• v.14 no.3
• /
• pp.59-66
• /
• 2012

Steel industry in Korea is a key national industry that has led economic growth for a long time. And accidents occurred from a variety of causes has endlessly made as much as remarkable achievements of steel industry. It is a fact that research achievements of disaster prevention in steel industry has not been significantly, compared to production technique achievements. And the level of interest on safety management in the steel industry is conspicuously low. Although support activity for a various safety management are provided reasonably to prevent disasters occurring with subcontractors. A method capable of quantitative evaluation, applied to subcontractors in most business places are relatively rare except parent firms-leading places. This study is to make and show safety management activities to purcue in advance in conjunction with a parent firm through development of a more systematic and quantitative evaluation model for disaster prevention with steel industry subcontractors, and to contribute to disaster prevention in domestic steel industry through advanced safety management method, by applying a proposed evaluation model of safety management activities as subcontractors in steel industry.

• Korean Institute of Interior Design Journal
• /
• no.22
• /
• pp.92-101
• /
• 2000

This study aims to inquire into the expressive characters of Shiro Kuramata's works regarding his design languages. His design languages, based on sentimentality and aesthetics characteristic of the orient and his unique memories and experiences, can be defined as nongravitation, fioatation and transparency. And the definition can be completed by his unique extinguishing technique, eliminating the structure with materials without feature, such as glass and acrylic and expanded metal, steel mash and 'Star piece Terrazzo' a material which he has invented. This study examines Shiro Kuramata's design works from the late 1960's to 1991, the year of his death, the background of his growth and the art and people who have influenced him. It also looks into the indigenous cultural background and his unique memories and experiences. The study also considers his furniture works and interior design to read his languages properties of the materials and expressive techniques. The study presents data on Shiro Kuramata and puts forwards the significance of his works and tries to lead the way of the interior design by application techniques of materials.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.121.5-121
• /
• 2001

For the last decade, remarkable progress in the coating weight uniformity of hot dip galvanized product has been made to overcome the tightening quality constraints and produce cost-effective galvanized products. This progress results from research and development works for more efficient air knife, more accurate model of coating process, more precise measurement of coating weight and more efficient control logics. The activities for an efficient mathematical model to predict coating weight and several control logics which has been implemented on the No.1 CGL, No. 2 CGL, and PGL at KwangYang Steel Works are reviewed in this article.

• Corrosion Science and Technology
• /
• v.20 no.1
• /
• pp.7-14
• /
• 2021

PosMAC^® is a brand of Zn-Mg-Al hot-dip coated steel sheet developed by POSCO. PosMAC^® can form dense surface oxides in corrosive environments, providing advanced corrosion resistance compared to traditional Zn coatings such as GI and GA. PosMAC^® 3.0 is available for construction and solar energy systems in severe outdoor environments. PosMAC^®1.5 has better surface quality. It is suitable for automotive and home appliances. Compared to GI and GA, PosMAC^® shows significantly less weight reduction due to corrosion, even with a lower coating thickness. Thin coating of PosMAC^® provides advanced quality and productivity in arc welding applications due to its less generation of Zn fume and spatters. In repeated friction tests, PosMAC^® showed lower surface friction coefficient than conventional coatings such as GA, GI, and lubricant film coated GA. Industrial demand for PosMAC^® steel is expected to increase in the near future due to benefits of anti-corrosion and robust application performance of PosMAC^® steel.

• International conference on construction engineering and project management
• /
• 2022.06a
• /
• pp.571-578
• /
• 2022

Modularization in a high-rise building is different from a small building, as it is exposed to more lateral forces like wind and earthquakes. The integrity, robustness, and overall stability of the modules and their performance is based on the joining techniques and strong structural systems. High lateral stiff construction structures like concrete shear walls and frames, braced steel frames, and steel moment frames are used for the stability of high-rise modular buildings. Similarly, high-rise stick-built buildings have concrete cores and perimeter frames for lateral load strength and stiffness. Methods for general steel-concrete connections are available in many works of literature. However, there are few modular-related papers describing this connection system in modular buildings. This paper aims to review the various research and practice adopted for steel-to-concrete connections in construction and compare the methods between stick-built buildings and modular buildings. The literature review shows that the practice of steel module-to-concrete core connection in high-rise modular buildings is like outrigger beams-to-concrete core connection in stick-built framed buildings. This paper concludes that further studies are needed in developing proper guidelines for a steel module-to-concrete core connection system in high-rise modular buildings.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1996.04a
• /
• pp.566-569
• /
• 1996

Steel making using EAF (Electric Arc Furnace) consists of three major processes: molten steel making, slab casting and hot rolling. Orders from customers, which includes their requirements such as composition, order quantity with allowable range, width, thichness, and unit weight of coils etc, are grouped as charges for EAF to enhance the productivity of the furnace. This paper develops an efficient grouping algorithm for charges in the EAF by exploiting the order characteristics: the allowable ranges of furnace capacity, order quantity, and unit weight of coils. Numerical test shows that the proposed heuristic works very efficiently and the results are quite satisfactory.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1999.08a
• /
• pp.220-226
• /
• 1999

In automatization of a warehouse for plate products, the selecting control of the number of steel plates to be lifted by a lifting magnet crane and the roller table control of steel plates being transported on are indispensible key technolgies. POSCO had developed these elementary technologies for the product warehouse of the plate mill in Pohang Works and succeeded in making the operation of the large-scale warehouse for plate products.