• Journal of Power System Engineering
• /
• v.18 no.3
• /
• pp.93-99
• /
• 2014

The purpose of this paper is to manufacture the non-sintered ceramic used lime and industrial waste. The used materials were basalt powder sludge, calcium hydroxide(Ca(OH)2) and additives such as calcium stearate and $TiO_2$. The mixing ratios between Ca(OH)2 and sludge were 5:5, 6:4 and 8:2, respectively. The ceramic forms were pressured by 100, 200 and 300 bar and cured in 14% CO2 for 12 days. The behaviors of compressive strength, specific gravity, water absorption and pH of ceramic form were investigated. The results were compressive strength of over 36 MPa, water absorption of over 8.8%, pH value of over 12.3. And these results satisfied GR F 4006 and 4031 standard.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1996.11a
• /
• pp.125-127
• /
• 1996

This paper deals with the fabrication of 4 poles anisotropic Sr·ferrite plastic magnets. After Polyamide6 and polyamlde12 are kneaded respectively with Sr·ferrite powder, silane coupling and calcium stearate of lwt% are added for coating and pelleting. The pelleted specimen are injection-moulded under the magnetic field using 4 poles mould. For 4 poles anisotropic Sr·ferrite plastic magnets with polyamide6 as a binder, the surface magnetic flux density distribution is +943.8∼-943.87kG and the deviation is 5.2%, where as with polyamide12, the distribution is +1040.9∼-1040.9kG and the deviation is 5.4%. It shows that both of the magnet distributions are stable. As the results of the experiments, we find 4 poles anisotropic Sr·ferrite magnets have good properties as the materials appropriate for manufacturing magnet type synchronous motors.

• Korean Journal of Materials Research
• /
• v.17 no.2
• /
• pp.86-90
• /
• 2007

The organic-capped Ba-Ti-O nanolayers were coated uniformly on spherical Ni particles for multilayer ceramic capacitor (MLCC) applications via the formation of Ti-hydroxide nano-coating layers and their subsequent reaction with Ba-stearate at $180^{\circ}C$. The capping of organic shell on oxide coating layer changed the hydrophilic surface structure into hydrophobic one, which significantly improved the dispersion behavior in hydrophobic solvents such as terpineol and butanol. In addition, the uniform coating of Ba-Ti-O layer was advantageous to prevent Ni oxidation. This method provides a useful chemical route to fabricate organic-soluble Ba-Ti-O coated Ni particles for a highly integrated passive component.

• YAKHAK HOEJI
• /
• v.15 no.1
• /
• pp.1-7
• /
• 1971

When a large quantity of insoluble drugs was added into a solution containing a small amount of soluble drugs, the latter was adsorbed to the former. Their adsorption was expected to alter the drug activity. Berberine hydrochloride (BH) was selected as a soluble drug and tested with frequently combined insoluble drugs and antacids for their adsorption phenomena in prufied water, gastric and intetinal fluid test solutions, respectively. The adsorption isotherms of kaolin and natural anuminum silicate with BH in the three media fitted the Langmuir (LM) equation, and that of talc in purified water and gastric fluid fitted it, but in intestinal fluid it fitted the Freudlich quation. The adsorption isotherm of aluminum hydroxide fitted the LM equation only in intestinal fluid. The degree of adsorption of BH in purified water and gastric fluid is in the following order: magnesium trisilicate, kaolin, natural aluminum silicate and talc; in intestinal fluid: magnesium trisilicate, kaolin, talc, natural aluminum silicate and aluminum hydroxide. Magnesium stearate did not adsorb BH.

• Journal of Pharmaceutical Investigation
• /
• v.10 no.1
• /
• pp.24-33
• /
• 1980

Drug product design of phenylbutazone tablets by direct compressing was investigated. Weight variation, hardness, friability, disintegration time, apparent volume and dissolution rate for experimental tablets of nine formulations which were considered to be the effect of the additive concentration were measured. It was found out that direct compressing by the formulation No. 5 was the most suitable condition (phenylbutazone 16.7%, lactose 25%, calcium phosphate dibasic 15%, $Avicel^{\circledR}$ 41.83% and magnesium stearate 1.5%). The coefficient of correlation between disintegration time and dissolution rate, r, was = -0.97 (P<0.01).

• Macromolecular Research
• /
• v.10 no.6
• /
• pp.369-372
• /
• 2002

The use of ZnO and stearic acid is very well known in sulfenamide accelerated sulfur vulcanization of diene elastomers. Zn-ion coated nano filler has been developed and tested, in styrene-butadiene rubber (SBR) as sulfur vulcanizing activator cum reinforcing filler. In this study Zinc oxide has been replaced by the Zn-ion coated nano silica filler with an aim to study the dual role of this nanofiller in SBR. The presence of Zn-ion on the nano silica filler surface activates the sulfur vulcanization by involving Zn++ in to the sulfurating complex formed with thiazole from sulfenamide. The increase of Zn-ion, on the nanofiller, decrease the scorch safety of the elastomer compound but increase the tensile strength, state of cure and tear strength and attain maximum at its 10% level. The presence of stearic acid increases the rate of vulcanization. Replacement of stearic acid with mono-stearate, however, increases the vulcanization rate but decrease the ultimate state of cure. A mechanistic scheme involving dual function of this nanofiller has been suggested.

• Bulletin of the Korean Chemical Society
• /
• v.18 no.6
• /
• pp.573-578
• /
• 1997

Ion fragmentations of fatty acids such as stearic acid, palmitic acid, myristic acid, and lauric acid were studied using mass spectrometry and semiempirical calculations. The mass spectra of fatty acids showed the distributions of CH₃(CH₂)$_n^+$ and $[(CH_2)_nCO_2H]^+$ fragment ions. The relative ion abundance distributions of $[(CH_2)_nCO_2H]^+$ showed the local maxima at n=6, 10, and 14. The local maximum phenomena were also found in the mass spectra of methyl stearate but not in those of normal alcohols. These local maxima could be explained not by heats of reaction for fragmentation but by the cyclic structures of the molecular ions. The AM1 semiempirical calculations for fatty acids clearly show that the linear structures are more favorable than the cyclic ones for neutral molecules while the cyclic structures are more favorable than the linear ones for ionic molecules. The distances between carboxyl group and methylene of the cylic structures of ionized fatty acids were calculated. The methylene carbons with n=6, 10, and 14 were closer to the carboxyl group than adjacent ones.

• Archives of Pharmacal Research
• /
• v.27 no.7
• /
• pp.734-737
• /
• 2004

5,8-Epidioxycholest-6-en-3-ol (1), cholesterol (2), glycerol 1-palmitate (3) and glycerol 1,3-dioleate-2-stearate (4) were isolated from the methanol extract of the sea urchin Diadema setosum, which was collected from the Halong sea, Vietnam. Chemical structures were established based on extensive 1D, 2D-NMR, FAB-MS, EI-MS spectroscopic data and GC-MS analysis. The NMR spectral data of compound 1 were reassigned by using HMQC and HMBC. Compound 1 was found to have strong cytotoxic effect against various cancer cell lines, such as KB ($IC_{50}$, 2.0 $\mu\textrm{g}$/mL), FL($IC_{50}$, 3.93 $\mu\textrm{g}$/mL), and Hep-2 ($IC_{50}$, 2.4 $\mu\textrm{g}$/mL) by in vitro assay.

• Analytical Science and Technology
• /
• v.34 no.2
• /
• pp.46-55
• /
• 2021

Evaluation of drug-excipient compatibility is one of the basic steps in the preformulation of pharmaceutical dosage forms. Some reactive excipients have been known so far which may cause stability problems for drug molecules in pharmaceutical dosage forms. The aim of this study was to evaluate drugexcipient compatibility of gliclazide with some common pharmaceutical excipients, known for their ability to incorporate in drug-excipient interactions. Binary mixtures were prepared using lactose, magnesium stearate, polyvinylpyrrolidone, sodium starch glycolate, polyethylene glycol 2000 and dicalcium phosphate. Based on the results; gliclazide was incompatible with all tested excipients; but not with dicalcium phosphate. DSC (Differential Scanning Calorimetry) results were in accordance with HPLC (High Pressure liquid chromatography) data and were more predictive than FTIR (Fourier Transform Infrared Spectroscopy). Drug and reactive excipients incompatibility was fully discussed and documented. It is advisable to avoid incompatible excipients or carefully monitor the drug stability when incorporating such excipients in final formulation designs.

• Korean Chemical Engineering Research
• /
• v.59 no.2
• /
• pp.219-224
• /
• 2021

Ion flotation is an efficient method to remove metal ions from aqueous solution. In this work, ion flotation was applied to calcium removal from aqueous solution. The parameters used included sodium stearate (SS) and sodium dodecyl sulfate (SDS) as collectors, 1-butanol and 1-propanol as frothers, pH, and air-flow rate. An L16 orthogonal array was chosen according to the mentioned factors and levels, and experimental tests were conducted according to the Taguchi orthogonal array. The results showed that all of the factors except one had significant effect on the flotation performance. The percentage contribution of parameters showed that type of frother and type of collector made the greatest (43.14%) and the lowest (9.86%) contribution, respectively. In optimal conditions, the recovery of Ca (II) ion was 45.67%. Also, the results illustrated that the Taguchi method could predict calcium removal from aqueous solution by ion flotation with 2.63%. This study showed that the use of ion flotation was an effective method for Ca (II) ion removal from aqueous solution.